@BuZz
Yes it is.
Thank you very much.

@mitu
On lr-puae2021 was stuck on error
error parsing global configuration on line 20

pi@retropie:~ $ sudo cat /dev/shm/runcommand.log /home/pi/scripts/rclone_script/scriph.sh: line 70: /home/pi/rclone-v1.39-linux-arm/rclone: No such file or directory Parameters: Executing: /opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-puae2021/puae2021_libretro.so --config /opt/retropie/configs/amiga/retroarch.cfg "/home/pi/RetroPie/roms/amiga/RuffNTumble_v2.7_512k_0199.lha" --verbose --appendconfig /dev/shm/retroarch.cfg [INFO] [Config]: Loading config from: "/opt/retropie/configs/amiga/retroarch.cfg". [INFO] [Config]: Appending config "/dev/shm/retroarch.cfg". [WARN] [GameMode]: GameMode cannot be enabled on this system ("dlopen failed - libgamemode.so: cannot open shared object file: No such file or directory.") https://github.com/FeralInteractive/gamemode needs to be installed. [WARN] [Config]: GameMode unsupported - disabling... [INFO] RetroArch 1.10.0 (Git e9e85f3) [INFO] === Build ======================================= [INFO] Capabilities: NEON VFPv3 VFPv4 [INFO] Built: Jan 30 2022 [INFO] Version: 1.10.0 [INFO] Git: e9e85f3 [INFO] ================================================= [INFO] [Input]: Found input driver: "udev". [INFO] [Core]: Loading dynamic libretro core from: "/opt/retropie/libretrocores/lr-puae2021/puae2021_libretro.so" [INFO] [Overrides]: No core-specific overrides found at "/home/pi/.config/retroarch/config/PUAE/PUAE.cfg". [INFO] [Overrides]: No content-dir-specific overrides found at "/home/pi/.config/retroarch/config/PUAE/amiga.cfg". [INFO] [Overrides]: No game-specific overrides found at "/home/pi/.config/retroarch/config/PUAE/RuffNTumble_v2.7_512k_0199.cfg". [INFO] [Environ]: GET_CORE_OPTIONS_VERSION. [INFO] [Environ]: RETRO_ENVIRONMENT_SET_CORE_OPTIONS_V2. [INFO] [Environ]: SET_CONTROLLER_INFO. [INFO] [Environ]: SET_SUPPORT_NO_GAME: yes. [INFO] [Environ]: GET_LED_INTERFACE. [INFO] [Environ]: GET_VFS_INTERFACE. Core requested version >= V1, providing V3. [INFO] [Remaps]: Remap directory: "/opt/retropie/configs/amiga/". [INFO] [Overrides]: Redirecting save file to "/home/pi/RetroPie/roms/amiga/RuffNTumble_v2.7_512k_0199.srm". [INFO] [Overrides]: Redirecting save state to "/home/pi/RetroPie/roms/amiga/RuffNTumble_v2.7_512k_0199.state". [INFO] [Environ]: GET_LOG_INTERFACE. [INFO] [Environ]: GET_PERF_INTERFACE. [INFO] [Environ]: SYSTEM_DIRECTORY: "/home/pi/RetroPie/BIOS". [INFO] [Environ]: CORE_ASSETS_DIRECTORY: "/home/pi/.config/retroarch/downloads". [INFO] [Environ]: GET_SAVE_DIRECTORY. [INFO] [Environ]: GET_DISK_CONTROL_INTERFACE_VERSION. [INFO] [Environ]: SET_DISK_CONTROL_EXT_INTERFACE. [INFO] [Environ]: SET_SERIALIZATION_QUIRKS. [INFO] [Environ]: SET_INPUT_DESCRIPTORS: [INFO] [Environ]: SET_KEYBOARD_CALLBACK. [INFO] [Environ]: SET_PIXEL_FORMAT: RGB565. [INFO] [Environ]: SET_SUPPORT_ACHIEVEMENTS: yes. [INFO] [Content]: Content loading skipped. Implementation will load it on its own. [libretro INFO] No model specified in: '/home/pi/RetroPie/roms/amiga/RuffNTumble_v2.7_512k_0199.lha' [libretro INFO] Model: 'A1200' [libretro INFO] Kickstart: 'kick40068.A1200' [libretro INFO] HD (1) inserted in drive DH0: '/home/pi/RetroPie/roms/amiga/RuffNTumble_v2.7_512k_0199.lha' [libretro INFO] -------------------------------------------------------------------------------- [libretro INFO] PUAE 2.6.1 7a2f6f1, May 10 2022 22:40:39 [libretro INFO] -------------------------------------------------------------------------------- [libretro INFO] RTAREA located at 00F00000 [libretro INFO] Known ROM 'KS ROM v3.1 (A1200)' loaded [libretro INFO] No disk in drive 0. [libretro INFO] Building CPU table for configuration: 68020 prefetch 24-bit [libretro INFO] 1883 CPU functions [libretro INFO] Building CPU, 45954 opcodes (2 1 1) [libretro INFO] CPU=68020, FPU=0, MMU=0, JIT=CPU=0. [libretro INFO] Reset at 00000000. Chipset mask = 00000007 [libretro INFO] PAL mode V=50.0000Hz H=15625.0879Hz (227x312+0) IDX=10 (PAL) D=0 RTG=0/0 [libretro INFO] hardreset, memory cleared [libretro INFO] SNDRATE 312.0*227.0*50.000000=3541200.000000 [libretro INFO] SNDRATE 312.0*227.0*50.000000=3541200.000000 [libretro INFO] PAL mode V=50.0000Hz H=15625.0879Hz (227x312+0) IDX=10 (PAL) D=0 RTG=0/0 [INFO] [Environ]: SET_MEMORY_MAPS. [INFO] [RCHEEVOS]: Load started, hardcore active [INFO] [RCHEEVOS]: Using host: https://retroachievements.org [INFO] [RCHEEVOS]: Found 0 potential consoles for lha file extension [INFO] [RCHEEVOS]: Trying console 4 [INFO] [RCHEEVOS]: Opened RuffNTumble_v2.7_512k_0199.lha [INFO] [RCHEEVOS]: Hashing RuffNTumble_v2.7_512k_0199.lha (1535226 bytes) [INFO] [RCHEEVOS]: Generated hash 429cdbd95d06be7fa0ab7298b387cbd4 [INFO] [RCHEEVOS]: Attempting to login martinex (with password) [INFO] [SRAM]: Skipping SRAM load. [INFO] [Core]: Version of libretro API: 1, Compiled against API: 1 [INFO] [Audio]: Set audio input rate to: 44100.00 Hz. [INFO] [Video]: Timings deviate too much. Will not adjust. (Display = 60.00 Hz, Game = 49.92 Hz) [INFO] [Video]: Set video size to: 320x240. [INFO] [Video]: Starting threaded video driver ... [INFO] [EGL] Falling back to eglGetDisplay [INFO] [EGL]: EGL version: 1.4 [INFO] [EGL]: Current context: 0x1. [INFO] [GL]: Found GL context: "egl_videocore". [INFO] [GL]: Detecting screen resolution: 320x240. [INFO] [GL]: Vendor: Broadcom, Renderer: VideoCore IV HW. [INFO] [GL]: Version: OpenGL ES 2.0. [INFO] Querying EGL extension: KHR_image => exists [INFO] [GL]: Using resolution 320x240. [INFO] [GL]: Default shader backend found: glsl. [INFO] [Shader driver]: Using GLSL shader backend. [WARN] [GL]: Stock GLSL shaders will be used. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] Shader log: Compiled [INFO] [GLSL]: Found GLSL fragment shader. [INFO] Shader log: Compiled [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] Shader log: Compiled [INFO] [GLSL]: Found GLSL fragment shader. [INFO] Shader log: Compiled [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] Shader log: Compiled [INFO] [GLSL]: Found GLSL fragment shader. [INFO] Shader log: Compiled [INFO] [GLSL]: Linking GLSL program. [INFO] [GL]: Using 4 textures. [INFO] [GL]: Loaded 1 program(s). [INFO] [Font]: Using font rendering backend: "stb-unicode". [INFO] [Video]: Graphics driver did not initialize an input driver. Attempting to pick a suitable driver. [WARN] [udev]: Couldn't open any keyboard, mouse or touchpad. Are permissions set correctly for /dev/input/event*? [WARN] [udev]: Full-screen pointer won't be available. [INFO] [udev]: Pad #0 (/dev/input/event1) supports force feedback. [INFO] [udev]: Pad #0 (/dev/input/event1) supports 16 force feedback effects. [INFO] [Joypad]: Found joypad driver: "udev". [INFO] [Video]: Found display server: "null". [INFO] ALSA: Using floating point format. [INFO] ALSA: Period size: 480 frames [INFO] ALSA: Buffer size: 1536 frames [INFO] [Display]: Found display driver: "gl". [INFO] [Playlist]: Loading history file: "/opt/retropie/configs/amiga/content_history.lpl". [INFO] [Playlist]: Loading history file: "/opt/retropie/configs/amiga/content_music_history.lpl". [INFO] [Playlist]: Loading history file: "/opt/retropie/configs/amiga/content_video_history.lpl". [INFO] [Playlist]: Loading history file: "/opt/retropie/configs/amiga/content_image_history.lpl". [INFO] [Playlist]: Loading favorites file: "/opt/retropie/configs/amiga/content_favorites.lpl". [INFO] [Playlist]: Written to playlist file: /opt/retropie/configs/amiga/content_history.lpl [INFO] [Environ]: SET_SYSTEM_AV_INFO: 720x288, Aspect: 1.250, FPS: 50.00, Sample rate: 44100.00 Hz. [INFO] [Audio]: Set audio input rate to: 44100.00 Hz. [INFO] [Video]: Timings deviate too much. Will not adjust. (Display = 60.00 Hz, Game = 50.00 Hz) [INFO] ALSA: Using floating point format. [INFO] ALSA: Period size: 480 frames [INFO] ALSA: Buffer size: 1536 frames [INFO] [Display]: Found display driver: "gl". [INFO] [Input]: Game Focus => OFF [INFO] [RCHEEVOS]: martinex logged in successfully [INFO] [RCHEEVOS]: Game could not be identified [libretro INFO] 6888x no FPU: f201 00009000 PC=00f80ca0 [libretro INFO] B-Trap f201 at f80ca0 (0x6bc04ca8) [libretro INFO] Fastcard: mapped @$200000: 8MB fast memory [libretro INFO] Card 1 (ZorroII) done. [libretro INFO] Filesystem: mapped memory @$e90000. [libretro INFO] Card 2 (ZorroII) done. [libretro INFO] Memory map after autoconfig: [libretro INFO] filesystem: diagentry called: 200098 [libretro INFO] SNDRATE 313.0*227.0*50.000000=3552550.000000 [libretro INFO] PAL mode V=50.0000Hz H=15625.0879Hz (227x312+1) IDX=10 (PAL) D=0 RTG=0/0 [libretro INFO] Mounting uaehf.device 0 (0): [libretro INFO] FS: mounted virtual unit WHDLoad (/home/pi/RetroPie/roms/amiga/WHDLoad/) [libretro INFO] Mounting uaehf.device 1 (0): [libretro INFO] FS: mounted virtual unit WHDSaves (/home/pi/RetroPie/roms/amiga/WHDSaves/) [libretro INFO] Mounting uaehf.device 2 (0): [libretro INFO] FS: mounted virtual unit DH0 (/home/pi/RetroPie/roms/amiga/RuffNTumble_v2.7_512k_0199.lha) [libretro INFO] FS: WHDLoad (flags=00000002,E=0,ED=1,EF=0,native='/home/pi/RetroPie/roms/amiga/WHDLoad/') starting.. [libretro INFO] FS: WHDSaves (flags=00000002,E=0,ED=1,EF=0,native='/home/pi/RetroPie/roms/amiga/WHDSaves/') starting.. [libretro INFO] FS: RuffNTumble_v2.7_512k_0199 (flags=00000004,E=0,ED=0,EF=1,native='/home/pi/RetroPie/roms/amiga/RuffNTumble_v2.7_512k_0199.lha') starting.. [libretro INFO] Illegal instruction: 4e7a at 00239134 -> 00239144 [libretro INFO] 6888x no FPU: f200 00004000 PC=0023915e [libretro INFO] B-Trap f200 at 23915e (0x6bcbe166) [libretro INFO] B-Trap f017 at 2391aa (0x6bcbe1b2)

@KpCollins hi, could I ask you to try with the scraper I'm developing?
https://github.com/zayamatias/retroscraper
It should be working with dragon 32, although I have not tested it, so some testing would be appreciated.

Thanks!

*** Edit: just tried myself and it took less than 2 minutes to scan +530 ROMs, +400 succesfully found and video/image downloaded...

I think the hid_nintendo driver works for USB connected gamepads, but it seems your controller is not 100% compatible with the Switch Pro Controller and the driver doesn't add the device.
You can check if the controller is properly initialized by running via SSH:

dmesg -w

and then re-plugging the controller. There will be some messages from the driver - if there are errors, then it means it's not working properly and the input device doesn't get added. If that's so, then I'd get a different controller, one that's advertised of working with a PC also - not just the Switch.

I was able to fix this issue. I tried a third television that it worked on. I guess retropie didn't like the refresh rate or resolution on my monitor originally? I was able to set the settings via the other TV and now everything works fine on the intended monitor.

@BadFurDay Sort of...

I tried compressing to mp3 with scummvm_tools and it does play, but the quality is terrible (not only in lr-scummvm, but everywhere). I guess the format is slightly different and scummvm_tools isn't completely compatible. [EDIT: But I only tried once. Might be worth trying to compile scummvm tools from source or try on a different system...]

It seems that Talkie Builders can't create mp3 version directly (but maybe I overlooked something).

EDIT EDIT: Talkie builders can create mp3 versions and they work and sound great.

@mitu Interesting! Thank you very much for your feedback! I'll check how the library emulates the keyboard!

My fallback is a microcontroller to emulate the keyboard, if the software portion is too complex.

@DirtBagXon Thx!

@Treco

A while ago I added the stickfreaks binary install option in my script.
Still in the the secret menu/test menu though.

If you want to try, let me know, I will send you some more info.

@BuZz thank you for the extra pair of eyes. I'm on a version from a week ago, but indeed going over github commits the version changed recently from 3.3 to 5.1 in the meantime.
And indeed that commit includes the change:
"Move rom location for amiberry/uae4arm/uae4all to $biosdir/amiga".

@windg said in Duckstation - How Do You Load Saved Game Data from Another Game?:

Maybe the issue here is that every save file is a different memory card. Try to use a shared memory card so the system can read the save from the first game.

You can change this setting from RetroArch .

Quick menu > options >Port Settings > change to Share between all games.

I was able to do it.

On Duckstation I went to Settings>Memory Card Settings then for Memory Card Type selected Shared Between All Games. Then I went to Tools>Memory Card Editor and for Memory Card on the left side selected the first Tomba game and on the right side selected Tomba 2. Then I moved the first Tomba saved game file over to the right by pressing >> and clicked Save.

@mitu

Hmm, unfortunately that didn't fix anything.

Reflashing a fresh image of the latest version of RetroPie also caused the same problems. Very strange as this has never happened before... could it be an issue with the CM4 bootloader...

I've never had this issue before. I'm using a relatively old bootloader for the CM4 back from February 21st... is there a way to manually override the framebuffer resolution or change it?

I only could fix it by adding fbset -fb /dev/fb0 -g 800 480 800 480 16 to rc.local, but this is less than ideal…

fbset -s output shows:

mode "640x480"
geometry 640 480 800 480 16
timings 0 0 0 0 0 0 0
accel true
rgba 5/11,6/5,5/0,0/0
endmode

When it should technically be geometry 800 480 800 480 16... I did try adding the below to /etc/fb.modes and rebooting, however this didn't seem to fix it

mode "800x480"
geometry 800 480 800 480 16
timings 0 0 0 0 0 0 0
accel true
rgba 5/11,6/5,5/0,0/0
endmode

tvservice also shows the following output:
pi@retropie:~ $ tvservice -s
state 0x6 [DVI DMT (87) RGB full 15:9], 800x480 @ 59.00Hz, progressive

However within /sys/class/graphics/fb0/modes, it shows:

U: 640x480p-0
U:800x480p-0

Is there a way to remove this second value in this file/will it provide any fix? I am having issues sudo nano editing it at the moment due to permission problems, however I have figured out a crap workaround which just writes the following command to rc.local (would prefer to avoid this): fbset -fb /dev/fb0 -g 800 480 800 480 1

@sleve_mcdichael said in (PSP) CISO or another iso>cso converter?:

Is this safe?

Looks like probably yes. I also found the file listed on https://packages.ubuntu.com/focal/armhf/ciso/download. I don't see where to actually download it from this page, but the md5sum given there does match the file downloaded from the other source. This looks like a rather official source, even if I don't know what Launchpad Librarian (the other one) is.

Will it work?

Also, probably yes. It does run. I compressed two ISOs with ciso on my RPi, and also with umdgen on my PC, and compared them.

For one game, the CSO made by ciso and the one made by umdgen, were identical (yay!), and on decompressing, the output ISO was also identical to the original.

For the other game, the CSOs were different, but they both worked.

On decompressing, they came out still different, but they also both still worked. The one that was made by ciso, when decompressed by ciso, was identical to the original source ISO (yay!). But the one that was initially made by umdgen, when decompressed by ciso was different than the original, but it did still work.

I got about 20% savings overall (10% on the big one and 45% on the smaller one.)

Thanks for your very detailed steps. Although very old; for future googlers with an headless server this might be important:

I spent hours troubleshooting emulation which hangs at "1 gamepad detected", and couldnt get any further even when pressing buttons. Apparantly there is an bug where emulationstation will start properly, but hangs if there arent any window managers installed... Installing xfwm4 (on the host) fixed this problem

https://github.com/Aloshi/EmulationStation/issues/291

@mitu sorry I’m not sure, I switched to bsnes core for K Griffey in the launch menu and that’s when the issue started. I assumed that if KGJr didn’t launch, it wasn’t compatible with the core so I switched back to SNES9X. However I decided to re-image retropie, everything is working now, including KGJr in bsnes (MLB season now works). This was after I removed and reinstalled the core packages to no avail.

Yes

@TimD123 When you write an image it will delete the previous image every time. This temporary fix is outdated. You can now use the retropie 4.8 image.

You can make an older buster image work if you replace some boot files (I don't know what they are) or put it in an older pi4 and update it that way.