@buzz

Oy......sorry I should have known that (it just slipped out). I got overexcited. Sorry that I’m off to a bad start :(

Another issue, after upgrading from 4.2 to 4.3 and saving a core wide shader preset when you quit the ROM and open it again or another rom from the same core the preset is not applied (at least is saved) and you need to apply it, also in the update I lost my RetroAchievements settings

@lamaman1971 I just realized, there is an easier solution for per-ROM settings without bothering to modify an artwork .zip file. You can simply specify the ROM as a prefix to a setting inside your .rc file. For example, say you have:
display_artwork_bezel yes

but you want to forego the bezel for Tempest. Just add:
tempest/display_artwork_bezel no

which will override the bezel setting for that one ROM.

AdvanceMAME works this way for everything, so you can get very granular with controls, video--anything really. It also works to use prefixes like vertical/display_artwork_bezel no. I am not sure about all of the supported categories, but I know they exist for game resolution, orientation, vector, and possibly others. Obviously, if you wanted to have your default setting be no and then only use a bezel for a specific title with a prefix of that ROM and a setting to yes that will work too.

@tigerjonny said in anyone have an idea on this error:

@barrymossel bloody got to work away for 10 days...bloody typical would likd to try and get my head round some of it....got the retrpie screen on...then got the call...i gather its adding the rom s after that)

Yup, setting up the controller(s) and then adding roms (through one of the various ways). https://github.com/retropie/retropie-setup/wiki/Transferring-Roms

i have decide to buy a FLIRC device :D

@sik i thought this was just me. The only emulator it works in is n64 for some reason

Sselph's graphical menu from the RetroPie-Setup options is fairly limited - it's the command line where it really comes into its own.

In essence, quit ES by pressing F4 (scraping whilst ES is running usually doesn't work very well). cd to the roms directory and then into your console of choice and then run the following:

/opt/retropie/supplementary/scraper/scraper -add_not_found -download_images -download_marquees -download_videos -console_src ss,gdb -console_img mix4,3b,b,s,f,l -image_dir=boxart -image_path=boxart -img_format png -video_dir=snap -video_path=snap -marquee_dir=wheel -marquee_path=wheel -marquee_format png -image_suffix="" -video_suffix="" -marquee_suffix="" -missing "games_missing.csv"

Please note, I've been separating out video snaps and marquees in prep for an Attract Mode build so you may want to adjust accordingly. To break the command down, it's scraping a mixed mode image from screenscraper and putting into a 'boxart' folder within the console's rom folder (-console_img mix4,3b,b,s,f,l means it looks for a mixed image first, then 3d box art, then boxart, then screenshot etc). It's then doing the same for video snaps and marquee images and all images will be output as png. I've also set it to output any missing titles into a csv for reference. If you didn't want videos, you could just remove the -download_videos flag.

If you are a Windows user you can run this directly on your roms folders via DOS if you download the DOS version of Sselph scraper.

Hope that helps.

@ortsac no idea really. There is no physical damage to the slot or board. It powers up just fine, just can't get the green light to appear. I've inspected the slot pins as best I could and they seem to be in place. I'm gonna try and bend the pins up some more to see if spacing is an issue.

@mitu Installing the dependancies listed on the link you provided seems to gave done the trick. Thanks so much!

For those who are curious, I ran the following command as suggested by the Dolphin installation page (cut and pasted here for your convenience).

sudo apt install cmake pkg-config git libao-dev libasound2-dev libavcodec-dev libavformat-dev libbluetooth-dev libenet-dev libgtk2.0-dev liblzo2-dev libminiupnpc-dev libopenal-dev libpulse-dev libreadline-dev libsfml-dev libsoil-dev libsoundtouch-dev libswscale-dev libusb-1.0-0-dev libwxbase3.0-dev libwxgtk3.0-dev libxext-dev libxrandr-dev portaudio19-dev zlib1g-dev libudev-dev libevdev-dev "libpolarssl-dev|libmbedtls-dev" libcurl4-openssl-dev libegl1-mesa-dev libpng-dev qtbase5-private-dev

Grim fandango is fine but very dark image for me...

anyone?

@djolivo24 What have you tried? How have you "shutdown"? What card are you using? Do you know it's genuine? How are you writing the image? Please do the things listed here:
https://retropie.org.uk/forum/topic/3/read-this-first

I am very cautious as to go through the Configure pads because I struggled to have both my 360pad and my Arcade Stick working. Is there a place I can poke/text edit the Y as Favorites button?

Thanx!

retropie is a script that installs a bunch of emulators and supporting software to the machine it's running on. it can't support multiple users in a meaningful way.

you could do something like this: https://retropie.org.uk/docs/Running-ROMs-from-a-Network-Share/