Rpi USB audio woes and other zombies.

Natron

@hex That's odd because it didn't work. I tried both options, actually and got no love either way. I'll go back and reconfigure everything back to normal and try this method out again, though. Maybe I missed something.

Edit: Nope, still nothing. Oddly, the volume slider always sets itself back to 0% as well when I use the sound settings menu.

Edit 2: The performance is still atrocious, and fixes itself as soon as I disconnect my USB audio device. I think I'll just have to use this on a regular TV instead of a monitor with speakers. Ah well.

Hex

@Natron There are two settings you have to consider.

1) Master Volume control

If you want to control volume from ES, ES needs the device being used. For USB audio you need to select Speaker from PCM/SPEAKER/MASTER options. For Pi's own Audio out use PCM. For PC use MASTER

2) OMX Audio out device
If you want the Omx player to know which device to output audio from, you will have to set this option.

Local -> Pi's audio out
HDMI -> Hdmi audio
Both -> Both of the above [Default]
ALSA -> Use Manual settings.

To test out which works for you, try this command after closing ES from the command line

# Change the parameter after -o to each of the options to check what works for you.
# options : local / hdmi / both / alsa:hw:0,0 / alsa:hw:1,0

omxplayer MY_VIDEO_FILE.mp4 -o alsa:hw:0,0

Xeon

@hex This option not even being possible unless you run the update script.

Hex

@Xeon Are you not running the updated ES?? The feature was added a few weeks ago. If you havent updated ES then you will have to.

Xeon

@hex understood

Xeon

Thanks for helping out a old noob.

Xeon

Yeah i don't know why but the sound still won't work.
Not even being detected now.
odd.

Xeon

I think this usb hub may have a dead port.

Xeon

Nope.
tested usb chip in pc.
hub port works.
just not detected.

Xeon

Ahh it's the sound chip.. it died.. detects on my pc for a few seconds then stops working.

Xeon

@Hex

Ok so i replaced the sound card.

Then chose alsa:hw:1,0 as the chip is listed there
Then chose Master.
Still no sound.

Then increased the volume.
Still no sound.

Rebooted.

Volume reset to 0 by itself.
Increased the volume again.
Still no sound.

if i set the volume and exit the menu and return it sets it back to 0

Xeon

@Hex
Sound volume drops to 0 the moment Speaker or Master is selected.
PCM does not drop it to 0

Xeon

@Hex When launching any thing i can see the cli where it's launching, i see:

lvl0| VolumeControl|::init() - Failed to find Mixer Elements!

Xeon

After googling online i see no one has provided this much info.
But no one has solved this ever.
Starting to lose hope on this one.

Hex

Can you do a clean format, choose Speaker and ALSA:HW:1,0
That should get it working.

I would like to point out to you that if I have not replied you can edit your previous comment to include additional information. No need to create multiple posts. I am sometimes working on code and dont visit the site.

Xeon

@hex
Will i need to update?
Sorry keep forgetting about the edit function.

If i need to update. "because you need to update to see the sound options"
Then i have done this twice.
Both times had the same result.

Hex

@Xeon I am asking if you can do a clean format. As in wipe SD card and re write retropie image.

Xeon

@hex said in Rpi USB audio woes and other zombies.:

@Xeon I am asking if you can do a clean format. As in wipe SD card and re write retropie image.

Ok each time.
I did do a proper format.

Download source.
https://retropie.org.uk/download/

But lets do it again.
I will also do a fresh download and check the MD5 hash.

Formatted and partition wiped.
alt text

MD5 Compared
alt text

Image freshly written and verified.
alt text

What is the next step?

Hex

Boot your Rpi with usb sound card connected.

From ES select Speaker in volume control and ALSA:HW:1,0 as omx device. Close Settings menu. Open Settings menu again and verify that volume level is saved properly.

Thats all that is needed. Let me know if it works.

Xeon

@hex
The only options in sound settings shown are:

System Volume
Enable Sounds
Back

Nothing else.
alt text

What next?
Btw this is really hard to see on crt or Video display had to wait for the display to dim to take this pic.