Scripting help for replacing retroarch.cfg

TMNTturtlguy

I have another idea, a cleaner script, but it would change all the systems to the same setup. Meaning you could run the script and it would change all systems to standard, or all systems to overlay. Would you prefer all systems to change at once? or would you like individual control like i have it set up now?

Thanks

cyperghost

@flashpc @TMNTturtlguy
I would rather use the User Menu and create three independent bash files.
The system name can be extracted by sytem call $1

So the script are easily placed here as the wiki explains...

and would look like

shaders on.sh

#!/bin/bash
# Replace retroarch configs in general
cp -f "/opt/retropie/configs/$1/retroarch_shader.cfg" "/opt/retropie/configs/$1/retroarch.cfg"
# Create file for detecting changes to shader
touch "/opt/retropie/configs/$1/shaderchange.tmp"

in runcommand-onstart.sh you write

# Checks for `shaderchange.tmp` and reverts changes back if file is located
if [[ -f "/opt/retropie/configs/$1/shaderchange.tmp" ]]; then
    cp -f "/opt/retropie/configs/$1/retroarch_standard.cfg" "/opt/retropie/configs/$1/retroarch.cfg"
    rm "/opt/retropie/configs/$1/shaderchange.tmp"
fi

The advantage is... you've a general method that only depends on system description of $1 command....
Maybe @meleu gots a much better idea ;)

FlashPC

@cyperghost can this script also change the overlay image in the retroarch/overlays folder?

cyperghost

@flashpc It depends just on the cp command
cp -f "/opt/retropie/configs/$1/retroarch_overlay.cfg" "/opt/retropie/configs/$1/retroarch.cfg"

will show your overlay.

So you create three bash files for user menu... I'm pretty sure it will work for all systems as $1 uses system names!

cp overlays
cp shaders
cp standard (here comment out the touch command!)

The nice thing is, that with runcommand-onstart.sh every call will be checked if there was a system change and then the standard file will be changed back (if you don't want then just create the three bash files for User Menu and you are ready ;)

FlashPC

cheers guys, I'll have a play around tomorrow and see which option works best for the system I'm putting together.

Thanks again

meleu

@cyperghost said in Scripting help for replacing retroarch.cfg:

Maybe @meleu gots a much better idea ;)

Hello fellows. I'm little confused about the desired results here.

@FlashPC can you expand what are the results you expect?

EDIT: I've got the file copying/overwriting part, I'm just curious about what do you have in those files and if you want those configs only for some ROMs, etc.

FlashPC

@meleu the results I am trying to get is a script that will overwrite the retroarch.cfg file and a PNG file from either attract mode or emulation station without the need of a keyboard.

I have 3 copies of the retroarch.cfg file, one with the details for using custom overlays with additional crt shaders, one with just the crt shaders, and one with neither.

If you want to see the config files they are here

The outcome is to change the settings for the whole system, not just one game.

The person that I am making this build for can then choose whether they want;

All games for that system playable with a basic overlay with crt shaders.
All games for that system playable with a realistic overlay with crt shaders.
All games for that system playable with no overlay with crt shaders.
All games for that system playable with no overlay and no shaders.

Once they have made their decision, the games for that system will follow those rules until they decide to change it, even if they reboot the system.

Hopefully that makes sense

Paul

meleu

@flashpc I think I've got what you want. I would use a different approach if I wanted those results. I would try to create new entries in the /opt/retropie/configs/SYSTEM/emulators.cfg, each new entry loading a different retroarch.cfg.

Here is an example of how my emulators.cfg for NES looks like:

lr-fceumm = "/opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-fceumm/fceumm_libretro.so --config /opt/retropie/configs/nes/retroarch.cfg %ROM%"
default = "lr-fceumm"

I would add these lines:

lr-fceumm-shader = "/opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-fceumm/fceumm_libretro.so --config /opt/retropie/configs/nes/retroarch_shader.cfg %ROM%"
lr-fceumm-overlay = "/opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-fceumm/fceumm_libretro.so --config /opt/retropie/configs/nes/retroarch_overlay.cfg %ROM%"

And then your friend could change the behaviour in runcommand menu, changing the "emulator".

FlashPC

@meleu I like the idea, apart from the fact that they could potentially change aspects of the emulators, plus I can only seem to access the runcommand menu via a keyboard, and I am trying to change these with a controller only.

@tmntturtlguy I ran the script and it is nice, but is there anyway control could be made with the controller. just like the way retropie_setup.sh does?

TMNTturtlguy

@flashpc it should work with your controller. Did you follow the instructions and place the script in retropie menu folder? If run from the retropie menu it will run with a properly configured controller that is recognized as the first player.

FlashPC

@TMNTturtlguy yeah you are right, it just works in emulationstation, I've manage to get it working within attract mode using joymap, like the old days and KODI.

I really like the script, is there a way in which the first menu has you select the console and then a second menu will ask you to select a config

I've changed the code slightly to match my setup, there is a lot of text, and it does work, I was just thinking once the system has been selected in the first menu can that variable be used to populate the file addresses in the second menu

For example if you select Playstation in the first menu then it knows to look in the 'psx' folder

Here is what I have so far

meleu

@flashpc said in Scripting help for replacing retroarch.cfg:

@meleu I like the idea, apart from the fact that they could potentially change aspects of the emulators,

Not sure what you mean here.

I can only seem to access the runcommand menu via a keyboard, and I am trying to change these with a controller only.

Every connected controller can invoke runcommand menu. After choosing a game to play press the button you set for A several times until runcommand menu appears.

FlashPC

@meleu from the runcommand you can select emulators for the complete system, as well as per game. If this is done and the game is not compatible with the new emulator then it wont load, (arcade for example) so I would like to avoid that as I will not be able to help once he takes the box away with him.

and I don't know about accessing the menu from a controller, I tap the 'X' on my controller which is set to A in emulationstation and it just loads the games, but pressing 'ENTER' on the keyboard works every time.

TMNTturtlguy

@flashpc Wow, you have done a lot of work on this! As far as adding a second menu, I am sure there is a way to do it. I am not an expert on scripts, i just know enough to be dangerous! So my short answer is, I don't know how to do it off hand. I would have to spend some time researching/playing with it. Maybe @meleu can share some insight on how to modify the main menu and and add a second menu for each console.

My other thought would be to simplify the entire script so that the end user only has 3 choices.

Standard
Shaders
Overlay

When they select any of the options, the script runs and sets all emulators to the same configuration. You would still have a separate retroarch.cfg file for each system as you currently do, so you can control the exact outcome of each system, it is just that when the user wants overlays on NES, then all systems will have overlays. In my opinion this is how I would set it up. It is clean and easy. The end user has 3 choices and running the script is fast and easy, so it isn't like it is that big of an issue to go in and change it.

FlashPC

@tmntturtlguy I decided to use 4 options so I could use an overlay with an additional transparent filter which gives a shine or glare on the screen.

meleu

Can you guys post your scripts on ghostbin (or something similar) instead of meganz? I'm unable to see the script on my phone when it's on meganz.

cyperghost

@meleu https://ghostbin.com/paste/ytrxt

It's ... well functional but a huge list with cp commands.
I would prefer your approach as it is the easier way without copy file -->> much better.

@FlashPC
Use submenu and case selection to get it functional calls

Mean...
Main list is SEGA CD -> Select overlay, shader..... for SegaCD

#### THIS IS PSEUDOCODE!!!

modemenu ()
{
until [[ $shaderchoice == "<--" ]]
do
    shaderchoice=$(whiptail --backtitle " Choose " --title " Choose " --menu "Choose an option" 0 0 0 \
        "<--" "... back to mainmenu" \
        "standard" "Reset retroarch.cfg" \
        "shaders" "Use Shaders...." \
       .....
done

case "$shaderchoice" in
    standard) cp -f /opt/retropie/configs/all/retroswap/$1/standard/retroarch.cfg /opt/retropie/configs/$1/ ;;
    shaders) cp -f /opt/retropie/configs/all/retroswap/$1/shaders/retroarch.cfg /opt/retropie/configs/$1/ ;;
esac
done
}

#----------------------------

while true
do
    syschoice=$(whiptail --backtitle " Choose " --title " Choose " --menu "Choose an option" 0 0 0 \
        "nes" "Nintendo Entertainment System" \
        "md" "Sega Megadrive" \
       .....
done


case "$syschoice"
    *) modemenu "$syschoice" ;;
esac
done

This will shrink your code to minimum :)

meleu

@cyperghost said in Scripting help for replacing retroarch.cfg:

@meleu https://ghostbin.com/paste/ytrxt

Wow! Pretty huge. It can be simplified, but if it works, then fine. I could help, but it seems to be a very specific script to @FlashPC needs. I'm not sure about the details in his config...

FlashPC

Hey guys I've filled in the script that @cyperghost posted and I kind of understand what is trying to happen, but Iam stuck as to what I am missing, I don't know how to add the nice black boxes but I've entered it into ghost paste here

cyperghost

https://ghostbin.com/paste/t7ws7

Here is a working script!
As I said --- it's was pseudocode with some errors
2x done without do, break condition was set wrong, dialogboxes showed unneeded options....

If you run this script you will see just 3do standard for ex. as output.. Therefore
You must exchange the commands in line 49-52 with your copy commands.

So you stripped down from 30kB to 3kB and can faster navigate ;)

Greetings fly out to @meleu (<--- this guy is responsible for my rising interest in bash) and @TMNTturtlguy (<--- this guy is responsible that I get in need to use bash ... EUREKA!)