Best case to keep raspberry pie 3 cool?
-
I wonder if i just take off the thermal pad from the kana kit heatsink and cut out a thermal pad that's better quality would i get the same resalts. So far im looking at these cases.
this one it's open and afraid of dust.
https://www.amazon.ca/Excellent-Cooling-System-Heatsink-Raspberry/dp/B072ZZ423F/ref=sr_1_41?s=pc&ie=UTF8&qid=1505945213&sr=1-41&keywords=raspberry+pi+caseThis one blows the hot air out.
https://www.amazon.ca/Eleduino-Raspberry-Case-Aluminum-Blue/dp/B071YPZFZ4/ref=sr_1_32?s=pc&ie=UTF8&qid=1505945213&sr=1-32&keywords=raspberry+pi+caseThis one looks cool but one bad review saying the fan died.
https://www.amazon.ca/Enokay-Case-Raspberry-Model-Quality/dp/B011RBK2MG/ref=sr_1_26?s=pc&ie=UTF8&qid=1505945153&sr=1-26&keywords=raspberry+pi+caseThe case you guys are raving about. maybe get this one with a thermal pad thats better.
https://www.amazon.ca/Flirc-Raspberry-Case-Gen2-Model/dp/B07349HT26/ref=sr_1_2?s=pc&ie=UTF8&qid=1505945482&sr=1-2This one riverstorm said cost so much more then it costs in the us for some reason and also afrade of dust.
https://www.amazon.ca/iUniker-Transparent-External-Dissipating-Raspberry/dp/B01LXSMY1N/ref=sr_1_1?s=electronics&ie=UTF8&qid=1505946127&sr=1-1&keywords=raspberry+pi+case+iUniker -
Pretty much all of those fully closed cases are useless with fans, as the air can't get out from them. Those cases with the top lid but open sides are propably the best cases available, but of course, not so safe or good looking. And when talking about the fan, the fan always should be attached to the cooler in order to get proper air pressure going through the cooler.
-
Should I even worry about dust or anything hitting the board when it's on for the open one's. It will be in a safe place so I don't think anything will hit the board. Is the one in the first link as good it's cheeper then the iUniker.
The Flirc one is tempting thou. -
@deltax5 said in Best case to keep raspberry pie 3 cool?:
Should I even worry about dust or anything hitting the board when it's on for the open one's.
I haven't had many issues with dust. I do move mine around occasionally and maybe that's enough to knock things loose and keep any significant dust buildup from happening.
I've had good luck with the 40MM fan attached to the housing and a low profile heatsink to the die with a gap between. Traditionally in PC land it's more effective to have it attached to the heatsink but in this scenario it works and moves enough air to make a noticeable difference in cooling.
I do have a smaller 15MM fan that is directly attached to the heatsink and then directly to the die via thermal tape but I find the larger fan and open case do a better job at keeping it cooler and that might simply be because the fan is 25MM larger on the open case.
-
I was just thinking that you could use this as a case to keep your Raspberri Pi cool:
-
@caver01 said in Best case to keep raspberry pie 3 cool?:
I was just thinking that you could use this as a case to keep your Raspberri Pi cool:
That's classic! If that can't keeps things cool nothing can! :) We were just having a conversation this morning about the old tin lunchboxes vs. the newer soft side ones.
-
So im good with the first one? The iuniker one is so much more then it's in the us for some reason. Also should I get better thermal tape for the heatsinks. Which one's.
-
@deltax5 said in Best case to keep raspberry pie 3 cool?:
So im good with the first one? The iuniker one is so much more then it's in the us for some reason. Also should I get better thermal tape for the heatsinks. Which one's.
The first one looks fine. I can't say I have a lot of experience on thermal tape. I did some searching on Amazon and found what I though was a decent 3M brand. I didn't see a huge difference between the stock and purchased. It came in a sheet that fits in an envelope and I cut out pieces as needed.
The other thing I noticed about the thermal tape that came stock was it was applied incredibly sloppy and offset on some of the heatsinks missing a 3rd of the surface. I bought what I thought was 6 pieces of aluminum pretty dirt cheap but it actually ended up being 6 sets of 3 so I have them in surplus currently.
I used to cut out squares that took to long and was cumbersome. What I started doing was cut a sqare a little larger than the heatsink. Then I would peel one side off the tape, square up the heatsink and apply the tape. Then I would take a clean razor and cut around the heatsink. It does waste a bit more than trying to cut perfect squares but it's fast and fits like a glove. Then when you're ready peel the backside off and apply. I hope that makes sense.
-
We have seen a lot of bad accounts of self-adhesive tape for heat sinks. Some cases, it does not conduct heat at all--it insulates, rendering the heat sink useless and making your Pi overheat even more. There are good thermal conducting tapes out there, but you never know what you are getting in a kit, so I always recommend using a good thermal transfer paste like arctic silver, or a two-part CPU compound that will harden as it dries. It's buyer beware, and I find it sad that some folks claim heatsinks are ineffective when the truth may be that they have questionable self-adhesive tape.
-
@caver01 said in Best case to keep raspberry pie 3 cool?:
o I always recommend using a good thermal transfer paste like arctic silver
I usually keep some AS5 and Shin-Etsu handy (I think it had decent reviews at some point but haven't seen mention of it much lately). Does the heat and grease alone create enough suction/vacuum. How about when it's cool? Have you tried giving a jolt to see how solid it is connected? I might have to try it and do some testing on temp differences.
I've had good success with the tape I've been using. It does peel from the die well but not from the heatsink so readily. I do have plenty of aluminum heatsinks but try and stick to the copper when possible. All probably negligible but still interesting to fiddle with.
-
@riverstorm I have been using AS5 with a small aluminum sink on my Pi3 CPU for over a year without it moving at all, and my cabinet is a "semi" portable roadcase that have been moved around fair amount. Also, my Pi is mounted upside-down behind the LCD and the sink shows no sign of wiggling loose.
I read somewhere that Arctic Silver will thicken a bit as it goes through hot and cool cycles (power, no power). I expect the moisture starts to break down a bit and it dries out somewhat, though nothing permanent like a 2-part thermal epoxy.
I can see that if I added too much it would really slide around, but with just the right amount you get a good vacuum and the stuff is pretty sticky. Because my sink is cut perfectly to size, there is really nowhere for it to slide, as doing so would slide it off the CPU and that would expose the thermal paste which tends to want to stick to the sink, not release from it.
I just shudder every time I hear someone talk about tape, especially when the instructions for thermal paste have you avoiding even a single air bubble if possible.
-
@caver01 said in Best case to keep raspberry pie 3 cool?:
I just shudder every time I hear someone talk about tape, especially when the instructions for thermal paste have you avoiding even a single air bubble if possible.
That sounds pretty solid to me. Next time I have the heatsink off I am going try it that way. As you "power cycle" it supposedly cures and improves over time. Maybe a few degrees Celcius.
I think the biggest mistake is using to much thermal grease. To much grease is like driving around city streets in a bumper car. It works and protects you well but it's not optimal for the CPU or temps. I usually just shoot for at least covering the portion of the CPU cover plate that in turn comes in direct contact with the CPU die. I heard of people that de-lid the cover plate to get direct contact with the CPU.
Comparing the Pi to a CPU is like apples to oranges for me a bit. You can run fine most of the time without a heatsink/fan on a Pi. In contrast a modern PC will get you about 8 seconds (bull ride) and a shutdown. Hopefully the mobo did it quickly enough to save the CPU.
Also the Broadcom chip on the Pi (is acrylic?) I would assume whatever the material composition it has a much higher thermal resistance vs. any type of metal. Hopefully any tape between the chip and heatsink has some thermal conductive properties as to not be a complete insulator.
I agree just grease between heatsink and die is definitely better but if all you have handy is tape or it comes as a package deal I don't know if I would drop the extra money for grease. I usually have several syringes of it laying around. The Shin-Etsu has a nasty viscosity that require a little heating to make it workable. AS5 on the other hand is very forgiving and easy to apply.
Yeah air bubbles, fingerprint oil, hair, dust pretty much anything creates an issue. You figure the main purpose of the thermal grease is to fill fill in micro pits, etc. that are probably not visible to the naked eye but people like to goop that stuff on. I think the Pi was designed to run without anything but I know for sure it does run cooler with a heatsink or heatsink/fan combo if your going to push it a little.
-
How about watercooling a Raspberry? Anyone did this yet? 😊
Ok, it sounds like a calculator with a SSD Harddisk - but wouldnt that be "cool"? ☺ -
Ok, i just realized that this allready happened!
One step further: anyone vapochilled his pi to freeze the cpu allready? 😊 -
@sirhenrythe5th said in Best case to keep raspberry pie 3 cool?:
One step further: anyone vapochilled his pi to freeze the cpu allready
Wow! That looks really quite neat but I don't think I'll be doing it anytime soon! :) Amazing what some people do!
-
@caver01
you can't use thermal paste unless the heatsink is mounted by screws or something thats why they use thermal tape most of the time. Does the Flirc case have the heatsink pressed so i can use thermal paste? -
ya i ordered my case came with heatsinks and the tape was not cut perfect i emailed them and they sent other one's still the same problem. Can someone link me a ebay seller that sells the good thermal tape so i can cut it perfect.
-
I gutted my nes. Has plenty of room and then some! Run a fan on the pi and it keeps it cool.
-
Thermal glue is the answer to hold the heatsinks in place instead of just the paste. No one has yet designed a heatsink, that could be screwed to the RPi, but when that happens, then the thermal paste is the best solution.
-
@deltax5 said in Best case to keep raspberry pie 3 cool?:
Can someone link me a ebay seller that sells the good thermal tape so i can cut it perfect.
I just searched for thermal tape or heatsink thermal tape on Amazon and several types and styles (sheets or rolls) came up. I chose one that had a few decent reviews and went with it. I preferred the sheets.
I suppose you could do a bit more research on the manufacturer's website (you would probably have to go with a name brand if searching for specs) about the thermal impedance or resistance measurements. Applying it to two clean surfaces it should be pretty close to what they advertise.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.