How do I delete a rom that is causing problems when I can't type?

jonnykesh

@princegumball Looks like you are on your own then, just leave us "elitists" to it... Good luck.

PrinceGumball

Jesus Christ, I just want help. This is exactly why I tried to fix this without posting here.

I've given all the relevant information. It's all in the first post. Someone please help me.

PrinceGumball

alt text

Here's the screenshot from the other person's Pi (that I linked to in the first post). It's identical to mine except their's was Rise of the Robots on snes instead of megadrive.

BuZz

@princegumball You can enable SSH by creating a file ssh on the boot partition from another machine. However, you should start with an official image. We don't support 3rd party images. We don't know what's been changed on them, and we don't support those who sell our software.

You would do better here if you try and adjust your attitude a little.

https://www.raspberrypi.org/documentation/remote-access/ssh/

jonnykesh

@princegumball Take the card out, put it in your Windows machine and add an empty file called sshin the boot partition (the one Windows can see) Not a folder, just a blank file. Put it back in the Pi and SSH should be enabled. This should all happen automatically.
Install a program called PuTTY on your windows machine and use your IP address shown in the info above to access via PuTTY.

PrinceGumball

It's a GuruMediaBox Raspberry Pi 3. The RetroPie itself isn't custom. Does that count as a 3rd party image?

PrinceGumball

@jonnykesh said in How do I delete a rom that is causing problems when I can't type?:

@princegumball Take the card out, put it in your Windows machine and add an empty file called sshin the boot partition (the one Windows can see) Not a folder, just a blank file. Put it back in the Pi and SSH should be enabled. This should all happen automatically.
Install a program called PuTTY on your windows machine and use your IP address shown in the info above to access via PuTTY.

I will try this in a bit (furniture company is over right now). I'll post my results soon. Thanks.

PrinceGumball

Okay, tried that. I was able to put an empty ssh file in the boot partition. Put it back in the Pi and loaded it up, but there's no IP address. It's just blank after IP Address.........:

So, I'm gonna try using an ethernet cable.

PrinceGumball

Yeah, connecting the Pi to my laptop with an ethernet cable didn't do anything. I don't know why I thought it would. So, I'm stuck at...no IP address showing up on the Pi. So I don't have an IP address to type into Putty.

dankcushions

@princegumball said in How do I delete a rom that is causing problems when I can't type?:

Yeah, connecting the Pi to my laptop with an ethernet cable didn't do anything. I don't know why I thought it would. So, I'm stuck at...no IP address showing up on the Pi. So I don't have an IP address to type into Putty.

connect it to your router, not to your laptop.

if you want to use wifi on the pi3, then you need to read the docs

incunabula

Or try asking for help from the support site from the vendor who sold it to you.

PrinceGumball

How can I configure the wifi on the pi3 when I can't type anything? I can't get to any menus or a typable command line. It goes right to the error message after starting to load up. Is there another way to get a command line other than pressing F4? Because that doesn't work.

PrinceGumball

Also, I can't connect to the router with an ethernet cable, since I have my Pi set up with my TV in the living room and the router is upstairs.

Is doing the ssh thing with Putty the only way to do this? I just need to be able to type something. If I could type, I could do the sudo blah blah blah stuff and delete it that way.

dankcushions

@princegumball the screenshot you posted is already in the command line, assuming yours looks the same. i don't know why you wouldn't be able to type.

Also, I can't connect to the router with an ethernet cable, since I have my Pi set up with my TV in the living room and the router is upstairs.

take it upstairs? you don't need to connect it to a tv to access it via the network.

PrinceGumball

@dankcushions said in How do I delete a rom that is causing problems when I can't type?:

@princegumball the screenshot you posted is already in the command line, assuming yours looks the same. i don't know why you wouldn't be able to type.

Also, I can't connect to the router with an ethernet cable, since I have my Pi set up with my TV in the living room and the router is upstairs.

take it upstairs? you don't need to connect it to a tv to access it via the network.

How will I know what I'm doing without a screen though?

PrinceGumball

I'm trying really hard here. I'm not trying to be dense.

dankcushions

@princegumball said in How do I delete a rom that is causing problems when I can't type?:

How will I know what I'm doing without a screen though?

because when you SSH in you are typing in commands into a terminal prompt on your laptop, or any other device connected to the network.

PrinceGumball

Does anyone else have any ideas?

BuZz

@princegumball you've been given instructions already. If you can't manage it, I suggest starting from a fresh image. We don't support 3rd party images anyway.

PrinceGumball

The instructions given aren't working. Hooking the Pi up to my router via an ethernet cable is doing nothing, it's not showing up in the connected devices. I tried rebooting the router to see if that would do anything. Nothing.

Also, this issue is identical to the one this other person had, which WASN'T on a "3rd party image". Same game. Same error. Same terminal screen. Same not being able to type. https://retropie.org.uk/forum/topic/11389/emulationstation-crashes-after-retropie-boots-up-permission-denied/4

Is there NO way to stop the boot sequence? That's all I have to do. I need to be able to type the remove game command. That's all.