RetroPie going back to a point in time (snapshot/deepfreeze like)
-
@hex Thanks for the detailed answer. I did try the command, but it doesn't work :
dd: invalid status flag: ■progress■
Is there anything I am missing?
I had thought my SD card was bad, but it's not even a year old. I know problems can happen early, but it seems weird at this point...
-
@vladquebec I don't think I've had a single SD card last anywhere near as long as a year in a pi.
-
@zerojay Thanks for sharing, something new I've learned this week. :-)
-
Follow-up : just ran a surface scan of the SD card, while inserted into my laptop, everything looks fine.
Don't worry, I know it doesn't mean that's not the problem, but I thought I'd mention it.
-
@mitu Thanks for sharing this, I'll come back with a detailed list of what I have on my side.
-
@mitu Relevant information as requested :
Raspberry Pi 3 (RPi3) Model B Quad-Core 1.2 GHz 1 GB RAM
On-board WiFi and Bluetooth Connectivity
32 GB Micro SD Card (Class 10) - Raspberry Pi Recommended Micro SD Card pre-loaded with NOOBS
CanaKit 2.5A USB Power Supply with Micro USB Cable and Noise Filter - Specially designed for the Raspberry Pi 3 (UL Listed)
High Quality Raspberry Pi 3 Case, Premium Quality HDMI Cable, 2 x Heat Sinks, GPIO Quick Reference Card, CanaKit Full Color Quick-Start Guide
RetroPie Version Used (eg 3.6, 3.8.1, 4.1 - do not write latest): 4.2
Built From: Pre made SD Image on RetroPie website (retropie-4.2-rpi2-rpi3.img
USB Devices connected: None
Controller used: PS3 controller (wireless) and a keyboard/mouse when required (turned off most of the time).
Error messages received: None in this case.
Log found in /dev/shm/runcommand.log (if relevant): no such file there, no logs
Guide used: None
File: Files in the directory \retropie\roms revert to a previous state when the RetroPie reboots
Emulator: only default installed emulators, plus lr-ppsspp
Attachment of config files: N/A
How to replicate the problem: do a change in any game (upload a new one) and/or save a new state within a game, reboot and check to see if it's still there. -
@chipsnblip I've had this thought as well, concerning the free space, but it doens't seem to be a problem, here is the result of the df command :
-
@chipsnblip Did an expansion of the drive as recommended, but didn't do anything, reverted back to its original data at startup.
Found out the problem isn't only with RetroPie, it's with the rest as well : enabling SSH for terminal access reverted to disabled after reboot.
-
Where did you run that command? On your Linux PC I hope.
If yes you can just skip the "status=progress". It just provides feedback. Without that it will process but you will not get any feedback till the entire process is done.
-
@vladquebec, i'm curious to see if it's a permissions issue somewhere, post the outputs of:
cat /etc/fstaband
cat /boot/cmdline.txtand
ls -l /(no need for sudo)
-
Follow-up of something I've tried : I downloaded the most recent version of RetroPie, 4.3 and completely deleted the 2 partitions on the SD card. The part deleting the largest partition, containing the RetroPie data, took a long time. Right after I unplugged the SD card from the computer that I used to format it, I plugged it into the Raspberry Pi, and the partitions, including the data, were back. This clearly shows the problem is with the SD card.
At this point there are 2 possibilities (1 more probable than the other) :
- The SD card has begun to fail and cannot accept any changes.
- Some sort of read-only mechanism has been enabled, making it impossible to modify anything on the card (less probable, but still a possibility).
-
-
@vladquebec If you cannot flash imgs to sd card, your sd card is dead. I have one that went dead and partitions/files cannot be changed anymore.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.