Solution for " White Screen of Death "

Zigurana

From that link you included: https://github.com/retropie/retropie-setup/wiki/themes#white-screen-of-death
Its a fundamental design flaw in emulationstation, so unless someone takes up the task to recode significant parts of the theming of ES, there is no solution.

dankcushions

@Cybermen said in Solution for " White Screen of Death ":

Hi, maybe someone has already found out whether there is a solution for " White Screen of Death ". https://github.com/retropie/retropie-setup/wiki/themes .

I have more than 10 system running on Retropie and would like to use the Zoid Theme ?

I currently have version 3.7 installed.

Thank you very much.

the wiki page lists 3 solutions!! the top one seems like it would be most suitable for you. have you tried it?

Cybermen

Hi, I tried the first option . With different settings , but unfortunately it did not work for me

dankcushions

@Cybermen what setting did you try? post your /boot/config.txt and we can verify.

ProxyCell

Which raspberry pi model do you have?

Please consider merging some systems together to reduce the overall burden.

Cybermen

I have the Raspberry PI 3. This ist my config.txt:

# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details

# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1

# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1

# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16

# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720

# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1

# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1

# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2

# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4

# uncomment for composite PAL
#sdtv_mode=2

#uncomment to overclock the arm. 700 MHz is the default.
arm_freq=1300
core_freq=500
over_voltage=2

# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on
#dtparam=spi=on

# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi

# Additional overlays and parameters are documented /boot/overlays/README

# Enable audio (loads snd_bcm2835)
dtparam=audio=on

gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=256
overscan_scale=1
gpu_mem=256

I tried it by gpu_mem= with: 256, 384, 512, 640

dankcushions

@Cybermen said in Solution for " White Screen of Death ":

I tried it by gpu_mem= with: 256, 384, 512, 640

ahhh, but if you read the wiki page, that setting will do nothing for you:
https://github.com/RetroPie/RetroPie-Setup/wiki/Memory-Split

Also note that in order to ensure sensible memory splits across Pi models, RetroPie utilises the gpu_mem_256, gpu_mem_512 and gpu_mem_1024 overrides, which apply to Pis with that amount of memory (for example, the Pi 2 has 1024MB memory, so will use the gpu_mem_1024 setting). This setting overrides the gpu_mem setting that is described below, so if you still want to adjust the memory split, you will have to manually edit /boot/config.txt and adjust the relevant value, or delete the lines entirely.

ie, for a raspberry pi 3, you want to edit

gpu_mem_1024 = 256

keep raising it till it works for you :) 384 should be safe and fix it.

herb_fargus

@Cybermen please format code blocks properly as described on the read this first page on my signature

Cybermen

Wow , many thanks dankcushions . it works beautifully ! I have the Wiki read but unfortunately misunderstood , you have brought me only on the right way , many thanks . problem solved , so it works .

BuZz

I added formatting to his post.

edmaul69

@dankcushions said in Solution for " White Screen of Death ":

@Cybermen said in Solution for " White Screen of Death ":

I tried it by gpu_mem= with: 256, 384, 512, 640

ahhh, but if you read the wiki page, that setting will do nothing for you:
https://github.com/RetroPie/RetroPie-Setup/wiki/Memory-Split

Also note that in order to ensure sensible memory splits across Pi models, RetroPie utilises the gpu_mem_256, gpu_mem_512 and gpu_mem_1024 overrides, which apply to Pis with that amount of memory (for example, the Pi 2 has 1024MB memory, so will use the gpu_mem_1024 setting). This setting overrides the gpu_mem setting that is described below, so if you still want to adjust the memory split, you will have to manually edit /boot/config.txt and adjust the relevant value, or delete the lines entirely.

ie, for a raspberry pi 3, you want to edit
gpu_mem_1024 = 256
keep raising it till it works for you :) 384 should be safe and fix it.

So i use the carbon theme but i have custom made themes on the gamelist for 11 systems. If i add 1 or two more i end up with it locking up scrolling through the games. If i add 3 i get a white screen. On my pi 3 if i change the 1024 to 384 it still white screens on the same amount of themes as on 256. Any clue why that change wont fix it. I can post my config.txt if i need.

Rookervik

@edmaul69

There's a minimum amount of VRAM required to display certain size wallpapers. If you have just 1, 1920x0180 wallpaper, you MUST have 256 meg RAM split. But that 256 RAM split will take you up to 10 or so wallpapers. The next jump is probably 512 split. Which should still be just fine with most of the emulators that the Pi can handle.

You can make sure your theme wallpapers are 720p and that will help you with the RAM issues. ES was not designed for the Pi, but it works.

The Carbon theme was designed for the Pi's limited video RAM just for the white screen problems. If you're going to make some custom themes, try thinking in 'parts' instead of 'wallpapers.' Several 512x512 images take less VRAM than a 1920x1080 wallpaper. Try to re-use elements so ES doesn't have to fill VRAM with a massive picture.

BuZz

Thread moved - help questions should go to the help & support area.

edmaul69

@Rookervik said in Solution for " White Screen of Death ":

@edmaul69

There's a minimum amount of VRAM required to display certain size wallpapers. If you have just 1, 1920x0180 wallpaper, you MUST have 256 meg RAM split. But that 256 RAM split will take you up to 10 or so wallpapers. The next jump is probably 512 split. Which should still be just fine with most of the emulators that the Pi can handle.

You can make sure your theme wallpapers are 720p and that will help you with the RAM issues. ES was not designed for the Pi, but it works.

The Carbon theme was designed for the Pi's limited video RAM just for the white screen problems. If you're going to make some custom themes, try thinking in 'parts' instead of 'wallpapers.' Several 512x512 images take less VRAM than a 1920x1080 wallpaper. Try to re-use elements so ES doesn't have to fill VRAM with a massive picture.

On the system select screen it is still carbon on the inside its custom. the pics are really really tiny because i made them previously on the simple theme and it uses the stretching. Most of the pics are around 10x10 pixels. They have different fonts in each console though. The fact that i can have eleven of them on 256 megs but cant have 14 of them on 384 makes no sense.

Rookervik

@edmaul69

That is very strange. A 10x10 pixel image will take the VRAM of a 16x16 image. Everything unwraps to a power of 2. As long as these images are not SVGs. An SVG stretched to full screen takes a canvas to display, and that canvas takes the full VRAM of that area. So even if the SVG has a single line in it, and the file size is 0.5kb, it will take the same VRAM as a 1080p PNG uncompressed. Fonts shouldn't take too much RAM, and they are regular RAM. Try 512 RAM split. 384 hasn't ever made any difference for me before.

If you're still bothered by things, you can try zipping up the theme and sending it to me. I can look at it and figure out what you problem is.

edmaul69

@Rookervik said in Solution for " White Screen of Death ":

@edmaul69

That is very strange. A 10x10 pixel image will take the VRAM of a 16x16 image. Everything unwraps to a power of 2. As long as these images are not SVGs. An SVG stretched to full screen takes a canvas to display, and that canvas takes the full VRAM of that area. So even if the SVG has a single line in it, and the file size is 0.5kb, it will take the same VRAM as a 1080p PNG uncompressed. Fonts shouldn't take too much RAM, and they are regular RAM. Try 512 RAM split. 384 hasn't ever made any difference for me before.

If you're still bothered by things, you can try zipping up the theme and sending it to me. I can look at it and figure out what you problem is.

So changing the
gpu_mem_1024=500
made absolutely no difference. Most of my themes have an 8x8 solid color block. Maybe 2 of them. If they need a stripe on the top it might have a 1x343 pic. A few of the ones i have working have a pic of woodgrain or metal for the top or bottom less than 350x350. None of the 3 / 4 themes i am trying to add use more than 2 8x8 pics. None of the ones i am trying to add have a pic bigger than 8x8.

EDIT: is there a way to verify how much ram is being used for the gpu? I have a whole extensive overclocking list of stuff that i got from someone online for running n64 games and when i had it all set in the config.txt it made absolutely no improvements. And that had my cpu overclocked at 1450 and i saw no improvement. So im not sure if the themes my problem now or if overclocking and ram split is a problem. I have to have force_edid_audio for the sound to work on my tv but i wouldnt think that would affect this. It tells me it cant be overclocked in raspi-config on both 3.7 and 4.0 beta 2. I will start a new thread on the config.txt problems if that is my issue

Rookervik

@edmaul69

So tell me, is this white screen a completely white screen, so you can't see anything, or is it a white theme with none of your theming elements? From what you're saying, you are actually using less assets than Carbon itself. Which can load 60 systems without RAM issues. Does your theme look like this when you load it? If so, the theme xml files have errors in them.
alt text

Also, keep in mind that the RAM splits should stay in powers of 2. Just like any images you use in the theme. 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096... Your 1x343 image uses the same RAM a 512x512 image would take, as does the 350x350 image. They all unfold to a power of 2 in VRAM.

edmaul69

@Rookervik said in Solution for " White Screen of Death ":

@edmaul69

So tell me, is this white screen a completely white screen, so you can't see anything, or is it a white theme with none of your theming elements? From what you're saying, you are actually using less assets than Carbon itself. Which can load 60 systems without RAM issues. Does your theme look like this when you load it? If so, the theme xml files have errors in them.

Also, keep in mind that the RAM splits should stay in powers of 2. Just like any images you use in the theme. 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096... Your 1x343 image uses the same RAM a 512x512 image would take, as does the 350x350 image. They all unfold to a power of 2 in VRAM.

No my theme stuff is not blank. All the themes i have added and are trying to add all work. I just boot to a pure white screen when i have too many of them.

Rookervik

@edmaul69

Welp, I've suggested everything I can think of. I've made 3 or 4 themes and if you keep the assets small in size then you don't run into memory issues. You say your assets are small, so I can't really figure out what the problem is. Sorry. :(

KillerQ

@Rookervik

Even though this white screen of death has been addressed on the official emulationststion website, has anyone come up with a fix? I am on testing some theories this weekend.