USB ports no longer determine player number retroarch 1.7.1
-
@meleu sorry to bug you, but would you have any idea why your joystick section tool makes no difference in retroarch 1.7.1?
-
@lostless
This reminds me of something :)
See here : https://retropie.org.uk/forum/post/136301My findings were :
- Without sixad, the DS3 always take precedence over other controllers (new sony kernel module behaviour ?) according to SDL/jslist (on which @meleu script is based)
- Kernel (and retroach) are apparently taking joysticks in the order they are plugged (aka js* numbers)
So it can't work, basically because controller 0 for jslist/joystick-selection is controller 1 for retroach.
Good luck with this !
-
@sano so what you’re saying is the newest kernel is now ordering joysticks in the order in which they are plugged in vs. the USB port number? If so, that makes things complicated for my situation.
-
@lostless Wait until the next RA version will come around [1], it will be chaos :).
[1] https://retropie.org.uk/forum/topic/17228/coming-soon-to-retroarch-new-input-mapping-system-old-remap-files-don-t-work -
Hi guys
I suspect this is related to the same issue I found with RA 1.7.1. My situation is a bit of an edge case but sounds like you are running into same issue.
In short, there was a commit to RetroArch between 1.6.9 and 1.7.1 that added a sort to the udev joystick numbers, so whatever device is in js0 is always player 1, js1 is player 2, etc. Since I use xboxdrv js0 is not necessarily player 1.
For me, I commented out the offending line in the source and recompiled RA from source and it works. Bit of a hack but it worked for me as I wasn't sure my situation was enough to justify a proper bug report. I'm happy to provide more detail on my workaround if needs be.
My original report is here: https://retropie.org.uk/forum/topic/16959/using-2-controllers-with-xboxdrv-p1-and-p2-controls-swap-almost-every-time-i-launch-retroarch-1-7-1/3
-
After many tests, I can't find anyway to set even controller priority permanently and select which controllers i want for each player. It seems to be prioritizing when a controller is plugged in. since my pistation always has that adaptor plugged in, It always uses those 2 ports as players 1 and 2, and there seems to be no way around it. I can change it for one session via the rgui, but after I quit, it just goes right back. I'm willing to take any suggestion as getting my build back to 1.6.9 with the old kernel is impossible. *** note to self, Don't update if you have a good build
-
I figured something out. Using @meleu joystick selection tool, i found a way to change the order of the joysticks. Heres the thing. The tool is still showing the order on which they are plugged in via USB, But retrarch is now using a different logic. So i have a ps3 controller via bluetooth and the adaptor on port 4. The ps3 is being seen on the joystick selection tool as JS0, and the adaptor as JS1 and JS2. But retroarch sees its as the adaptor as JS0 and 1 and the ps3 controller as JS2. So I set the joystick selection tool to use the adaptor on JS2 as player one. Guess what!!!!!??? The ps3 controller is now player 1. Retroarch is only seeing that i set JS2 as player 1. Ignoring the fact that the joystick selector tool says JS2 is the adaptor. I tried to set joysticks by name, but it doesn't seem to work anymore. So i know its not a great answer, but I miss the USB port priority already.
-
new irony, when the ps3 controller was disconnected. I had no access to hot keys, even though the adaptor became player one, it was still expecting hot keys from js2 mapped to player one. this new system is terrible.
-
You may be able to get by with setting
all_users_control_menu = "true".RetroPie v4.5 • RPi3 Model B • 5.1V 2.5A PSU • 16GB SanDisk microSD • 512GB External Drive
-
Has anyone tested this with a 360 controller yet? Since that is what I mainly use a wireless 360 controller with an adapter.
-
@mediamogul said in USB ports no longer determine player number retroarch 1.7.1:
You may be able to get by with setting
all_users_control_menu = "true".This is already set by the RetroPie installs script when installing RA (https://github.com/RetroPie/RetroPie-Setup/blob/master/scriptmodules/emulators/retroarch.sh#L195).
@lostless I had the same thing happened (P1 disconnected, couldn't control with P2) before 1.7.1, so it's not something new.
-
@mitu said in USB ports no longer determine player number retroarch 1.7.1:
This is already set by the RetroPie installs script when installing RA
I might be wrong, but I don't think this would be set on an install that has been maintained for some time. Of course, I'm basing that notion on it never having been added to my own setup.
-
@mitu I think you may of misunderstood. Player one was the ps1 adapter because the ps3 controller was not on. All is good. Go to exit a game, can't. Hot keys not working. I had to turn on my ps3 controller which came up as player 3, but retroarch is set to have player 3 "JS2" as player 1. So the ps1 adaptor continued to be player one in game, but the hot keys only worked on the ps3 controller. Its really odd. there is no sense to the controller inputs anymore.
-
Update. After exhaustive testing, it seems controllers are no longer determined by the USB port, but by the order they are plugged in/turned on in retroarch 1.7.1. This applies to usb and Bluetooth controllers. You can go into the cong files and change which controller is player 1, but it can be deceiving because the retropie config files are still showing the order which they are plugged in via usb, but the real numbers are the order in which they are connected. So in my case, my ps1 adaptor is showing up as controllers 2 and 3 when I plug another controller into USB port 0. But since the pi booted with those in first, those are acutually js0 and js1. So to make the new controller player one, I have to select the ps1 adaptor, but it’s not, it’s the new controller I just plugged in. It is actually js2 and all I’m doing is telling retroarch that js2 is now player one. Bad part is if I unplug the 3rd controller, retroarch is still expecting js2 to be player one, so if i start a game, can’t do anything until a 3rd controller is plugged it making that one js2. This situation works well for Bluetooth controllers that will assign themselves based on when they turn on, but can wreck Havok on usb controllers that are always plugged in. It will assign players based on when Linux sees the controllers first. Some turn on quicker than others.
-
@lostless Thanks for the update. Do you know how it is with two identical usb controllers? Are they being randomly assigned or … ?
-
This is a really big problem for anyone that's using GPIO pins for a controller, ensuring that any other controllers will only ever be assigned js2/js3 and never being js0/js1 as the GPIO controllers will always be seen first.
-
@clyde Its not that they will be randomly assigned, it'll order them based on when they are seen. Is how quick the circuitry is in each controller.
@zerojay Ya it is a pain, You can reorder them in the configs, but you have to remember to change the configs back if you want to go back to the gpio controller.
-
I'm wondering if the issue is this submit here: https://github.com/pyhammond/retropie_wiimote_lights/issues/1 -
https://github.com/libretro/RetroArch/commit/b14598657c4b813c555b6cc6c6e81ec0830621c4#diff-e24ecc035fba173802aca096d7675071 -
@msheehan79 said in USB ports no longer determine player number retroarch 1.7.1:
Hi guys
I suspect this is related to the same issue I found with RA 1.7.1. My situation is a bit of an edge case but sounds like you are running into same issue.
In short, there was a commit to RetroArch between 1.6.9 and 1.7.1 that added a sort to the udev joystick numbers, so whatever device is in js0 is always player 1, js1 is player 2, etc. Since I use xboxdrv js0 is not necessarily player 1.
For me, I commented out the offending line in the source and recompiled RA from source and it works. Bit of a hack but it worked for me as I wasn't sure my situation was enough to justify a proper bug report. I'm happy to provide more detail on my workaround if needs be.
My original report is here: https://retropie.org.uk/forum/topic/16959/using-2-controllers-with-xboxdrv-p1-and-p2-controls-swap-almost-every-time-i-launch-retroarch-1-7-1/3
If you could provide more help on this, it would be appreciated, @msheehan79
-
@lostless But shouldn't two identical controllers have the same speed?
However, I ordered a second sd card yesterday to test Retropie 4.4 for other reasons, so I will see how my two identical zero delay encoders will be assigned.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.