Gamelist Locations

Clyde

@hansolo77 Can you change or store anything else? If not, your sd card may be failing and may've put itself into read only mode.

edit: Forget the above, as you deleted and re-scraped the gamelist. :) (Note to myself, never post before breakfast.)

hansolo77

It's possible the SD card is somehow corrupted. I had one failing on me, but didn't mark it. I've got a few laying around. I suppose I can try to swap with a different one.

Clyde

It would at least help to clarify if it the problems occur because of a failing sd card. It's definitely strange that a sudo chown -R pi:pi "/home/pi/RetroPie/roms" doesn't change the files' owner to pi. It just should do that.

That said, you should check the permissions from within Retropie, e.g. by ls -l in a given directory or with the file manager mc, because an external program like WinSCP may display them incorrectly.

In mc you can add an owner column by pressing F9, then select the menu Left or Right for the respective panel, and select Listing mode. In the listing mode dialogue, select User defined and add | owner to the line below that option. After pressing Enter to apply your changes, you should have a new column in that panel showing the owner of the files listed. Save mc's settings in the F9 menu under Options > Save setup.

hansolo77

I'm not familiar withmc. According to ls -l though, my folder looks like this:

drwxrwxrwx 1 root root      0 Apr 14 13:25 amstradcpc
drwxrwxrwx 1 root root      0 Apr 14 13:26 arcade
drwxrwxrwx 1 root root 151552 Jul  3 18:02 atari2600
drwxrwxrwx 1 root root      0 Apr 14 13:25 atari5200
drwxrwxrwx 1 root root  20480 Jul  3 18:14 atari7800
drwxrwxrwx 1 root root      0 Apr 14 13:25 atari800
drwxrwxrwx 1 root root  28672 Jul  3 18:24 atarilynx
drwxrwxrwx 1 root root 397312 Jul  8 14:38 fba
drwxrwxrwx 1 root root  94208 Jul  3 18:57 fds
drwxrwxrwx 1 root root 122880 Jul  3 20:06 gamegear
drwxrwxrwx 1 root root 385024 Jul  3 19:41 gb
drwxrwxrwx 1 root root 634880 Jul  4 06:37 gba
drwxrwxrwx 1 root root 360448 Jul  3 22:51 gbc

Clyde

Midnight Commander (mc) is rather self-explanatory. You start it just by entering mc in Retropies command line, and end it by pressing F10. The numbers at the bottom refer to F keys, and you access the pull down menus by F9. Mouse control is also supported, if your remote terminal supports it.

It's just a suggestion, you don't have to use it if you don't want. :) Some people like it, some don't.

My rom folders look like this:

$ ls -l RetroPie/roms
total 824
drwxrwxr-x  2 pi   pi     4096 Apr  7 10:39 ags
drwxrwxr-x  2 pi   pi     4096 Apr  7 12:05 amiga
drwxrwxr-x  2 pi   pi     4096 Sep 21  2017 amstradcpc
drwxrwxr-x  2 pi   pi     4096 Apr  7 10:43 apple2
drwxrwxr-x 11 pi   pi   135168 May 31 19:42 arcade
drwxrwxr-x 11 pi   pi    45056 May 26 16:24 arcade.noclones
drwxrwxr-x  3 pi   pi    36864 Nov 14  2017 atari2600                                                                                                                                                                                                 
drwxrwxr-x  3 pi   pi    20480 Oct 31  2017 atari2600.old                                                                                                                                                                                             
drwxrwxr-x  2 pi   pi     4096 Apr  7 08:48 atari5200                                                                                                                                                                                                 
drwxrwxr-x  2 pi   pi     4096 Sep 21  2017 atari7800                                                                                                                                                                                                 
drwxrwxr-x  2 pi   pi     4096 Apr  7 08:48 atari800                                                                                                                                                                                                  
drwxrwxr-x  2 pi   pi     4096 Sep 21  2017 atarilynx                                                                                                                                                                                                 
drwxrwxr-x  2 pi   pi     4096 Apr  7 10:43 atarist                                                                                                                                                                                                   
drwxrwxr-x  2 pi   pi     4096 Apr  7 10:49 c64

Clyde

In case you aren't familiar with the output, some explanations I haven't had the time earlier.

The "drwxrwxr-x" are the actual permissions in the pattern d rwx rwx rwx (directory; owner's permissions to read, write, and execute; owner's group's permissions; all others' permissions). A letter says "has this permission" and a "-" says otherwise. Execution rights for directories mean that you're allowed to enter them and list their contents.

So, your user pi should have rwx access to your rom folders, although they inexplicably belong to root, because their permissions allow all others than root('s group) equal access.

hansolo77

How can I fix it then?

chipsnblip

i'd first start by verifying the permissions/ownership of your home directory:

$ ls -la / | egrep home

drwxr-xr-x 3 root root 4096 Mar 13 14:55 home

then keep digging:

$ ls -la /home | egrep pi

drwxr-xr-x 12 pi pi 4096 Jul 8 02:43 pi

$ ls -la /home/pi | egrep RetroPie

drwxr-xr-x 6 pi pi 4096 Apr 14 10:27 RetroPie
drwxr-xr-x 9 pi pi 4096 Jul 3 03:11 RetroPie-Setup

hansolo77

@chipsnblip here are my results:

ls -la / | egrep home

drwxr-xr-x 3 root root 4096 Mar 13 17:55 home

ls -la /home | egrep pi

drwxr-xr-x 13 pi pi 4096 Jul 10 12:48 pi

ls -la /home/pi | egrep RetroPie

drwxrwxrwx 1 root root 4096 Jul 1 00:32 RetroPie
drwxr-xr-x 9 pi pi 4096 Jun 30 23:50 RetroPie-Setup

Sano

Just to be sure : is your RetroPie folder on the SD, or do you have some manual mount on USB key, NAS, ... ?

hansolo77

The RetroPi folder is mounted on a usb hard drive..

Sano

Was sort of obvious when you said chown was not working.
You have to add uid=1000,gid=1000 in the options part of your fstab line, then.
And of course umount/remount the FS.

hansolo77

Where? Currently my /etc/fstab line has this:

UUID=80B89CC9B89CBF5A /home/pi/RetroPie ntfs nofail,user,umask=0000 0 2

Sano

UUID=80B89CC9B89CBF5A /home/pi/RetroPie ntfs nofail,user,uid=1000,gid=1000,umask=0000 0 0

hansolo77

No 2 on the end then? Sorry I don't know much about this part of the build, copied from somebody else found through Google. :)

Sano

@hansolo77
Last field is for fsck pass number when rebooting.
AFAIK fsck (so last digit of fstab lines) is only for unix filesystems.
You may repair ntfs on linux with ntfsfix, but it has limitations, and you should use a windows computer instead.

hansolo77

I do use Windows. I think there are 2 things I did wrong here. Firstly was with the fstab, and secondly was my backup process. When I built my system, I backed up the RetroPie folder to my server, so I would have easy access to the BIOS and ROMS folders so I could just easily copy them back over if the drive fails. Rather than remove the drive and connect it to the computer, I downloaded all the files to the server with SFTP. When I started building my brother's system, I just re-used those same files, and SFTP'd them back over (again, without connecting the drive directly). I think it wrote the files over with the wrong permissions. I should have just connected the drive and copied them over that way. Would have been faster too. Live and learn I guess.

Sano

@hansolo77
So is your problem solved ?

hansolo77

Looks like it could be. I'm about to leave for work so I will test more tomorrow. But quick glances show it now has that whole path set up as pi:pi.