Guide: Advanced Controller Mappings

Mayki

I am trying to map the buttons on my PS3 controller, but I have no names for the buttons X(302), Triangle(300) and Circle(301).

Event: time 1469807542.183632, type 1 (EV_KEY), code 297 (BTN_BASE4), value 0
Event: time 1469807542.183632, -------------- EV_SYN ------------
Event: time 1469807542.930848, type 1 (EV_KEY), code 298 (BTN_BASE5), value 1
Event: time 1469807542.930848, -------------- EV_SYN ------------
Event: time 1469807543.074988, type 1 (EV_KEY), code 298 (BTN_BASE5), value 0
Event: time 1469807543.074988, -------------- EV_SYN ------------
Event: time 1469807543.684320, type 1 (EV_KEY), code 299 (BTN_BASE6), value 1
Event: time 1469807543.684320, -------------- EV_SYN ------------
Event: time 1469807543.805707, type 1 (EV_KEY), code 299 (BTN_BASE6), value 0
Event: time 1469807543.805707, -------------- EV_SYN ------------
Event: time 1469807544.772830, type 1 (EV_KEY), code 303 (BTN_DEAD), value 1
Event: time 1469807544.772830, -------------- EV_SYN ------------
Event: time 1469807544.930849, type 1 (EV_KEY), code 303 (BTN_DEAD), value 0
Event: time 1469807544.930849, -------------- EV_SYN ------------
Event: time 1469807545.909350, type 1 (EV_KEY), code 300 (?), value 1
Event: time 1469807545.909350, -------------- EV_SYN ------------
Event: time 1469807546.058367, type 1 (EV_KEY), code 300 (?), value 0
Event: time 1469807546.058367, -------------- EV_SYN ------------
Event: time 1469807546.599438, type 1 (EV_KEY), code 301 (?), value 1
Event: time 1469807546.599438, -------------- EV_SYN ------------
Event: time 1469807546.711951, type 1 (EV_KEY), code 301 (?), value 0
Event: time 1469807546.711951, -------------- EV_SYN ------------
Event: time 1469807547.283398, type 1 (EV_KEY), code 302 (?), value 1
Event: time 1469807547.283398, -------------- EV_SYN ------------
Event: time 1469807547.407163, type 1 (EV_KEY), code 302 (?), value 0
Event: time 1469807547.407163, -------------- EV_SYN ------------

It is normal?
My other buttons:

D-PAD UP - BTN_TOP2   CODE 292
D-PAD DOWN - BTN_BASE  CODE 294
D-PAD LEFT - BTN_BASE2  CODE 295
D-PAD RIGHT - BTN_PINKIE  CODE 293
SELECT - BTN_TRIGGER  CODE 288
START - BTN_TOP  CODE 291
L1 - BTN_BASE5  CODE 298
L2 - BTN_BASE3  CODE 296
R1 - BTN_BASE6  CODE 299
R2 - BTN_BASE4  CODE 297
X - (?) CODE 302
SQUARE "ČTVEREC" - BTN_DEAD  CODE 303
TRIANGLE "TROJÚHELNÍK" - (?) CODE 300
CIRCLE "KOLEČKO" - (?) CODE 301
L-ANALOG KLIK - BTN_THUMB CODE 289
R-ANALOG KLIK - BTN_THUMB2 CODE 290
L-ANALOG LEFT - ABS_X MÍNUS
L-ANALOG RIGHT - ABS_X PLUS
L-ANALOG UP - ABS_Y MÍNUS
L-ANALOG DOWN - ABS_Y PLUS
R-ANALOG LEFT - ABS_Z MÍNUS
R-ANALOG RIGHT - ABS_Z PLUS
R-ANALOG UP - ABS_RX MÍNUS
R-ANALOG DOWN - ABS_RX PLUS

mediamogul

@Mayki said in Advanced Controller Mappings:

It is normal?

I believe first party PS3 controllers have native support in xboxdrv. I don't own a PS3 controller myself, so I was unable to test this, but supposedly it will automatically map the controller for you with the button locations in the same places you'd expect to find them. Try the mapping below and see if it works.

sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
	--silent \
	--detach-kernel-driver \
	--force-feedback \
	--deadzone-trigger 15% \
	--deadzone 4000 \
	--mimic-xpad \
	&

In this situation, most people will be happy with the automatic button mapping, as the buttons and sticks are more or less in the same location between the two types of controllers, but it is still possible to alter the arrangement by using the --axismap and --buttonmap command arguments. Using the example I just gave above, I'll illustrate this technique below by inverting the Y-axis on the left joystick (useful in some games if you don't like helicopter controls) and also switch the 'A' and 'B' buttons.

sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
	--silent \
	--detach-kernel-driver \
	--force-feedback \
	--deadzone-trigger 15% \
	--deadzone 4000 \
	--mimic-xpad \
	--axismap -y1=y1 \
	--buttonmap a=b,b=a \
	&

Of course this example can be expanded to include any number of mappings. You could even switch the left and right joysticks completely if needed.

Mayki

When I type in the rc.local:

sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
        --evdev /dev/input/event2 \
	--silent \
	--detach-kernel-driver \
	--force-feedback \
	--deadzone-trigger 15% \
	--deadzone 4000 \
	--calibration x1=-32767:0:32767,y1=-32767:0:32767,x2=-32767:0:32767,y2=-32767:0:32767 \
	--mimic-xpad \
	&

Have not noticed any change after the restart, gamepad is still reported as a Playstation 3 controller.
How do I know that it works?

mediamogul

@Mayki

Drop --evdev /dev/input/event2 \ and see if that does it. If not, I did a little reading on the PS3 controller and it appears as though you can map those four buttons using my original instructions as follows:

--evdev-keymap KEY_#302=a,KEY_#301=b,BTN_DEAD=x,KEY_#300=y

In context, that would look like:

sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
	--evdev /dev/input/by-id/* \
	--silent \
	--detach-kernel-driver \
	--force-feedback \
	--deadzone-trigger 15% \
	--deadzone 4000 \
	--mimic-xpad \
	--evdev-absmap ABS_*=x1,ABS_*=y1,ABS_*=x2,ABS_*=y2,ABS_*=lt,ABS_*=rt,ABS_*=dpad_x,ABS_*=dpad_y \
	--evdev-keymap BTN_KEY_#302=a,KEY_#301=b,BTN_DEAD=x,KEY_#300=y,BTN_*=lb,BTN_*=rb,BTN_*=tl,BTN_*=tr,BTN_*=guide,BTN_*=back,BTN_*=start \
	&

I hate that I don't have a PS3 controller to test, but maybe that will take care of the issue. If so, I'll add it to the instructions up top.

Mayki

Without success.
Write :

cat /proc/bus/input/devices

output:

I: Bus=0006 Vendor=054c Product=0268 Version=0100
N: Name="PLAYSTATION(R)3 Controller"
P: Phys=
S: Sysfs=/devices/virtual/input/input2
U: Uniq=
H: Handlers=event2 js0
B: PROP=0
B: EV=20000b
B: KEY=1ffff 0 0 0 0 0 0 0 0 0
B: ABS=7f fc00ffff
B: FF=7030000 0 0

write:

ls /dev/input/by-id/

output:

usb-Logitech_USB_Receiver-event-kbd
usb-Logitech_USB_Receiver-if01-event-mouse
usb-Logitech_USB_Receiver-if01-mouse

No PS3 gamepad on the list.
Unable to add to the line.

--evdev /dev/input/by-id/* \

When writing this:

sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
  --evdev /dev/input/event2 \
	--silent \
	--detach-kernel-driver \
	--force-feedback \
	--deadzone-trigger 15% \
	--deadzone 4000 \
	--mimic-xpad \
	&

No change.

When writing this:

sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
	--silent \
	--detach-kernel-driver \
	--force-feedback \
	--deadzone-trigger 15% \
	--deadzone 4000 \
	--mimic-xpad \
	&

No change. Gamepad is still reported as a Playstation 3 controller.
ps3

mediamogul

@Mayki

Based on all the information you've given so far, you're configuration should look like this:

sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
	--evdev /dev/input/event2 \
	--silent \
	--detach-kernel-driver \
	--force-feedback \
	--deadzone-trigger 15% \
	--deadzone 4000 \
	--mimic-xpad \
	--dpad-as-button \
	--evdev-absmap ABS_X=x1,ABS_Y=y1,ABS_Z=x2,ABS_RZ=y2,ABS_#48=lt,ABS_#49=rt \
	--evdev-keymap KEY_#302=a,KEY_#301=b,BTN_DEAD=x,KEY_#300=y,BTN_THUMB=tl,BTN_THUMB2=tr,BTN_BASE5=lb,BTN_BASE6=rb,BTN_TRIGGER=back,KEY_#720=guide,BTN_TOP=start,BTN_TOP2=du,BTN_PINKIE=dr,BTN_BASE=dd,BTN_BASE2=dl \
	--calibration x1=-32767:0:32767,y1=-32767:0:32767,x2=-32767:0:32767,y2=-32767:0:32767 \
	&

If that doesn't work, we'll have to look at the error that is given. The easiest way to do that is to paste the previous command directly into the terminal minus the final backslash and ampersand. After you press 'Enter', the error will print out if something's wrong.

Mayki

Some success...

pi@retropie:~ $ sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
> --evdev /dev/input/event2 \
> --silent \
> --detach-kernel-driver \
> --force-feedback \
> --deadzone-trigger 15% \
> --deadzone 4000 \
> --mimic-xpad \
> --dpad-as-button \
> --evdev-absmap ABS_X=x1,ABS_Y=y1,ABS_Z=x2,ABS_RZ=y2,ABS_#48=lt,ABS_#49=rt \
> --evdev-keymap KEY_#302=a,KEY_#301=b,BTN_DEAD=x,KEY_#300=y,BTN_THUMB=tl,BTN_THUMB2=tr,BTN_BASE5=lb,BTN_BASE6=rb,BTN_TRIGGER=back,KEY_#720=guide,BTN_TOP=start,BTN_TOP2=du,BTN_PINKIE=dr,BTN_BASE=dd,BTN_BASE2=dl \
> --calibration x1=-32767:0:32767,y1=-32767:0:32767,x2=-32767:0:32767,y2=-32767:0:32767
xboxdrv 0.8.8 - http://pingus.seul.org/~grumbel/xboxdrv/
Copyright © 2008-2011 Ingo Ruhnke <grumbel@gmail.com>
Licensed under GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under certain
conditions; see the file COPYING for details.


Your Xbox/Xbox360 controller should now be available as:
  /dev/input/js1
  /dev/input/event3

Press Ctrl-C to quit

pi@retropie:~ $ cat /proc/bus/input/devices
I: Bus=0003 Vendor=046d Product=c52b Version=0111
N: Name="Logitech USB Receiver"
P: Phys=usb-3f980000.usb-1.4/input0
S: Sysfs=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C52B.0001/input/input0
U: Uniq=
H: Handlers=sysrq kbd leds event0
B: PROP=0
B: EV=120013
B: KEY=10000 7 ff800000 7ff febeffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=1f

I: Bus=0003 Vendor=046d Product=c52b Version=0111
N: Name="Logitech USB Receiver"
P: Phys=usb-3f980000.usb-1.4/input1
S: Sysfs=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0002/input/input1
U: Uniq=
H: Handlers=kbd mouse0 event1
B: PROP=0
B: EV=1f
B: KEY=3007f 0 0 0 0 83ffff 17aff32d bf544446 0 0 ffff0001 130f97 8b17c000 6773fa d941dfed 9ed680 4400 0 10000002
B: REL=1c3
B: ABS=1 0
B: MSC=10

I: Bus=0006 Vendor=054c Product=0268 Version=0100
N: Name="PLAYSTATION(R)3 Controller"
P: Phys=
S: Sysfs=/devices/virtual/input/input2
U: Uniq=
H: Handlers=js0 event2
B: PROP=0
B: EV=20000b
B: KEY=1ffff 0 0 0 0 0 0 0 0 0
B: ABS=7f fc00ffff
B: FF=7030000 0 0

I: Bus=0003 Vendor=045e Product=028e Version=0110
N: Name="Microsoft X-Box 360 pad"
P: Phys=
S: Sysfs=/devices/virtual/input/input5
U: Uniq=
H: Handlers=js1 event3
B: PROP=0
B: EV=20000b
B: KEY=7cdb03c0 0 0 0 0 0 0 0 0 0
B: ABS=3f
B: FF=1 3f870000 0 0

mediamogul

@Mayki

Very glad to hear it. Everything looks to be in order from here. If anything else comes up, I'll be around.

Mayki

Write to rc.local:

#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

# Print the IP address
_IP=$(hostname -I) || true
if [ "$_IP" ]; then
  printf "My IP address is %s\n" "$_IP"
fi
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
	--evdev /dev/input/event2 \
	--silent \
	--detach-kernel-driver \
	--force-feedback \
	--deadzone-trigger 15% \
	--deadzone 4000 \
	--mimic-xpad \
	--dpad-as-button \
	--evdev-absmap ABS_X=x1,ABS_Y=y1,ABS_Z=x2,ABS_RZ=y2,ABS_#48=lt,ABS_#49=rt \
	--evdev-keymap KEY_#302=a,KEY_#301=b,BTN_DEAD=x,KEY_#300=y,BTN_THUMB=tl,BTN_THUMB2=tr,BTN_BASE5=lb,BTN_BASE6=rb,BTN_TRIGGER=back,KEY_#720=guide,BTN_TOP=start,BTN_TOP2=du,BTN_PINKIE=dr,BTN_BASE=dd,BTN_BASE2=dl \
	--calibration x1=-32767:0:32767,y1=-32767:0:32767,x2=-32767:0:32767,y2=-32767:0:32767 \
	&
exit 0

Restart, when writing this:

cat /proc/bus/input/devices

pi@retropie:~ $ cat /proc/bus/input/devices
I: Bus=0003 Vendor=046d Product=c52b Version=0111
N: Name="Logitech USB Receiver"
P: Phys=usb-3f980000.usb-1.4/input0
S: Sysfs=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C52B.0001/input/input0
U: Uniq=
H: Handlers=sysrq kbd leds event0
B: PROP=0
B: EV=120013
B: KEY=10000 7 ff800000 7ff febeffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=1f

I: Bus=0003 Vendor=046d Product=c52b Version=0111
N: Name="Logitech USB Receiver"
P: Phys=usb-3f980000.usb-1.4/input1
S: Sysfs=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0002/input/input1
U: Uniq=
H: Handlers=kbd mouse0 event1
B: PROP=0
B: EV=1f
B: KEY=3007f 0 0 0 0 83ffff 17aff32d bf544446 0 0 ffff0001 130f97 8b17c000 6773fa d941dfed 9ed680 4400 0 10000002
B: REL=1c3
B: ABS=1 0
B: MSC=10

I: Bus=0006 Vendor=054c Product=0268 Version=0100
N: Name="PLAYSTATION(R)3 Controller"
P: Phys=
S: Sysfs=/devices/virtual/input/input2
U: Uniq=
H: Handlers=event2 js0
B: PROP=0
B: EV=20000b
B: KEY=1ffff 0 0 0 0 0 0 0 0 0
B: ABS=7f fc00ffff
B: FF=7030000 0 0

Not X-Box 360 gamepad, why?

mediamogul

@Mayki

So it's working when you enter it into the command line directly, but not from /etc/rc.local? ~~Go ahead and post the entire contents of your /etc/rc.local so we can take a look at it.~~

EDIT: Nevermind, I see it above.

Mayki

/etc/rc.local :

#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

# Print the IP address
_IP=$(hostname -I) || true
if [ "$_IP" ]; then
  printf "My IP address is %s\n" "$_IP"
fi
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
	--evdev /dev/input/event2 \
	--silent \
	--detach-kernel-driver \
	--force-feedback \
	--deadzone-trigger 15% \
	--deadzone 4000 \
	--mimic-xpad \
	--dpad-as-button \
	--evdev-absmap ABS_X=x1,ABS_Y=y1,ABS_Z=x2,ABS_RZ=y2,ABS_#48=lt,ABS_#49=rt \
	--evdev-keymap KEY_#302=a,KEY_#301=b,BTN_DEAD=x,KEY_#300=y,BTN_THUMB=tl,BTN_THUMB2=tr,BTN_BASE5=lb,BTN_BASE6=rb,BTN_TRIGGER=back,KEY_#720=guide,BTN_TOP=start,BTN_TOP2=du,BTN_PINKIE=dr,BTN_BASE=dd,BTN_BASE2=dl \
	--calibration x1=-32767:0:32767,y1=-32767:0:32767,x2=-32767:0:32767,y2=-32767:0:32767 \
	&
exit 0

mediamogul

@mediamogul

Try pasting the command above the line # Print the IP address.

Mayki

No change. No Xbox gamepad.

mediamogul

@Mayki

There's a conflict with the other command in the file that's printing the IP address. I'm not sure how to make them coexist, but the xboxdrv command itself should run without the other.

Mayki

Delete the command in the file that's printing the IP address to rc.local, restart.

pi@retropie:~ $ cat /proc/bus/input/devices
I: Bus=0003 Vendor=046d Product=c52b Version=0111
N: Name="Logitech USB Receiver"
P: Phys=usb-3f980000.usb-1.4/input0
S: Sysfs=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C52B.0001/input/input0
U: Uniq=
H: Handlers=sysrq kbd leds event0
B: PROP=0
B: EV=120013
B: KEY=10000 7 ff800000 7ff febeffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=1f

I: Bus=0003 Vendor=046d Product=c52b Version=0111
N: Name="Logitech USB Receiver"
P: Phys=usb-3f980000.usb-1.4/input1
S: Sysfs=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0002/input/input1
U: Uniq=
H: Handlers=kbd mouse0 event1
B: PROP=0
B: EV=1f
B: KEY=3007f 0 0 0 0 83ffff 17aff32d bf544446 0 0 ffff0001 130f97 8b17c000 6773fa d941dfed 9ed680 4400 0 10000002
B: REL=1c3
B: ABS=1 0
B: MSC=10

I: Bus=0006 Vendor=054c Product=0268 Version=0100
N: Name="PLAYSTATION(R)3 Controller"
P: Phys=
S: Sysfs=/devices/virtual/input/input2
U: Uniq=
H: Handlers=js0 event2
B: PROP=0
B: EV=20000b
B: KEY=1ffff 0 0 0 0 0 0 0 0 0
B: ABS=7f fc00ffff
B: FF=7030000 0 0

Still no Xbox gamepad.

mediamogul

@Mayki

Go ahead and past the contents of the newly modified rc.local.

Mayki

/etc/rc.local now :

#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
	--evdev /dev/input/event2 \
	--silent \
	--detach-kernel-driver \
	--force-feedback \
	--deadzone-trigger 15% \
	--deadzone 4000 \
	--mimic-xpad \
	--dpad-as-button \
	--evdev-absmap ABS_X=x1,ABS_Y=y1,ABS_Z=x2,ABS_RZ=y2,ABS_#48=lt,ABS_#49=rt \
	--evdev-keymap KEY_#302=a,KEY_#301=b,BTN_DEAD=x,KEY_#300=y,BTN_THUMB=tl,BTN_THUMB2=tr,BTN_BASE5=lb,BTN_BASE6=rb,BTN_TRIGGER=back,KEY_#720=guide,BTN_TOP=start,BTN_TOP2=du,BTN_PINKIE=dr,BTN_BASE=dd,BTN_BASE2=dl \
	--calibration x1=-32767:0:32767,y1=-32767:0:32767,x2=-32767:0:32767,y2=-32767:0:32767 \
	&
exit 0

mediamogul

@Mayki

At this point, I'm starting to suspect poltergeists ;). Let's try reformatting the command to:

sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv --evdev /dev/input/event2 --silent --detach-kernel-driver --force-feedback --deadzone-trigger 15% --deadzone 4000 --mimic-xpad --dpad-as-button --evdev-absmap ABS_X=x1,ABS_Y=y1,ABS_Z=x2,ABS_RZ=y2,ABS_#48=lt,ABS_#49=rt --evdev-keymap KEY_#302=a,KEY_#301=b,BTN_DEAD=x,KEY_#300=y,BTN_THUMB=tl,BTN_THUMB2=tr,BTN_BASE5=lb,BTN_BASE6=rb,BTN_TRIGGER=back,KEY_#720=guide,BTN_TOP=start,BTN_TOP2=du,BTN_PINKIE=dr,BTN_BASE=dd,BTN_BASE2=dl --calibration x1=-32767:0:32767,y1=-32767:0:32767,x2=-32767:0:32767,y2=-32767:0:32767 &

Mayki

Such an idea.
If Sony gamepad connected via bluetooth and I enter the SSH command:

sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
	--evdev /dev/input/event2 \
	--silent \
	--detach-kernel-driver \
	--force-feedback \
	--deadzone-trigger 15% \
	--deadzone 4000 \
	--mimic-xpad \
	--dpad-as-button \
	--evdev-absmap ABS_X=x1,ABS_Y=y1,ABS_Z=x2,ABS_RZ=y2,ABS_#48=lt,ABS_#49=rt \
	--evdev-keymap KEY_#302=a,KEY_#301=b,BTN_DEAD=x,KEY_#300=y,BTN_THUMB=tl,BTN_THUMB2=tr,BTN_BASE5=lb,BTN_BASE6=rb,BTN_TRIGGER=back,KEY_#720=guide,BTN_TOP=start,BTN_TOP2=du,BTN_PINKIE=dr,BTN_BASE=dd,BTN_BASE2=dl \
	--calibration x1=-32767:0:32767,y1=-32767:0:32767,x2=-32767:0:32767,y2=-32767:0:32767

output is this:

Your Xbox/Xbox360 controller should now be available as:
  /dev/input/js1
  /dev/input/event3

Press Ctrl-C to quit

Unless Sony gamepad connected via bluetooth and I enter the SSH command output is this:

pi@retropie:~ $ sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
> --evdev /dev/input/event2 \
> --silent \
> --detach-kernel-driver \
> --force-feedback \
> --deadzone-trigger 15% \
> --deadzone 4000 \
> --mimic-xpad \
> --dpad-as-button \
> --evdev-absmap ABS_X=x1,ABS_Y=y1,ABS_Z=x2,ABS_RZ=y2,ABS_#48=lt,ABS_#49=rt \
> --evdev-keymap KEY_#302=a,KEY_#301=b,BTN_DEAD=x,KEY_#300=y,BTN_THUMB=tl,BTN_THUMB2=tr,BTN_BASE5=lb,BTN_BASE6=rb,BTN_TRIGGER=back,KEY_#720=guide,BTN_TOP=start,BTN_TOP2=du,BTN_PINKIE=dr,BTN_BASE=dd,BTN_BASE2=dl \
> --calibration x1=-32767:0:32767,y1=-32767:0:32767,x2=-32767:0:32767,y2=-32767:0:32767
xboxdrv 0.8.8 - http://pingus.seul.org/~grumbel/xboxdrv/
Copyright © 2008-2011 Ingo Ruhnke <grumbel@gmail.com>
Licensed under GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under certain
conditions; see the file COPYING for details.


-- [ ERROR ] ------------------------------------------------------
/dev/input/event2: No such file or directory

The rc.local It starts with the system, gamepad is not yet connected.
May not be gamepad startup already connected via cable necessary?

mediamogul

@Mayki

Ah... nice! OK, There's a command to force Bluetooth to load and pair known devices that can be added before the xboxdrv command. From memory I believe it's called 'modprobe' or something like that. I'll be more than happy to help you out with it, but to be honest, I'm starting to fade and should get some sleep. I'll look into it further after a few ZZZs, but feel free to read ahead. I'm curious about this myself and I remember thinking that this could potentially be a problem with Bluetooth as the system starts.