ECWolf - Wolfenstein 3D source port for mods

[tpo1990]

@cyperghost Yes i do want to use the github's clone method if feasible for the port. I will need to make some small change with the clone/pull from source into the script PR.

As an alternative this could come in handy for ecwolf and other source ports as well if github's clone method doesn't work.. Thanks. :-)

[ExarKunIv]

@cyperghost where would i add this into the script?

[cyperghost]

@ExarKunIv It would look like this --> https://dpaste.de/BAyL/raw

The better version would be this one --> https://dpaste.de/WMBY/raw (did not test yet) This would be the version that @tpo1990 would post ;)

[ExarKunIv]

@cyperghost thanks, i almost had it i had a . after the new line. opps lol

[ExarKunIv]

@cyperghost i copyed what you posted and i get a error

/home/pi
Could not successfully install ECWolf - ECWolf is an advanced source port for Wolfenstein 3D, Spear of Destiny, and Super 3D Noah's Ark based off of the Wolf4SDL code base. It also supports mods from .pk3 files. (/home/pi/RetroPie-Setup/tmp/build/ecwolf/ecwolf/ecwolf not found).

i do have the log file if you need anything else

granted im messing with the untested one
it just seems like it is not moving it from where it builds to there it is needed to run, but i dont know Shit about codeing, but you did say the mv command is useless now,

[cyperghost]

@ExarKunIv Then the ret-command would something like ecwolf/ecwolf/ecwolf

function install_ecwolf() {
    md_ret_files=(
       'ecwolf/ecwolf/ecwolf'
       'ecwolf/ecwolf/ecwolf.pk3'
    )

As I said I did just a quick look into this and did not test so far.
Was the compile procedure okay? You can use the first script I've posted.... this will work.

[tpo1990]

@cyperghost @ExarKunIv Okay so i have now made some small changes in how the scriptmodule fetch the source files from the ecwolf repo. I have removed the downloadAndExtract and replaced it with gitPullOrClone .

It now looks like this.

function sources_ecwolf() {
    gitPullOrClone "$md_build" "https://bitbucket.org/ecwolf/ecwolf"
}

I have tested the changes and it works for me. I have uploaded the changes to the ecwolf.sh file in my ecwolf repo. Although it works for me, i would like one of you to test it out before i add the change to the RetroPie project's PR. :-)

[ExarKunIv]

@cyperghost yes it seemed to do everything else perfect to the end

@tpo1990 i will give it a test right now and let you know

UPDATE
@tpo1990 it worked great, no errors or anything , it is lunches as it should

[cyperghost]

@tpo1990 Thx that looks good :) I don't know if bitbucket supports tags for branches, if so you download a fixed version and can always be sure that a special version is still working.

[tpo1990]

@ExarKunIv @cyperghost Good to hear. Thanks for testing out the new changes.

Me neither. If bitbucket does support such a feature, it could be useful to future revisions of the scriptmodule.

Now I will update the scriptmodule in the PR for the RetroPie project. :-)