Working Dreamcast games

hooperre

@quicksilver Have you tried either of the Worms games? I haven't gotten either of those to work.

quicksilver

@hooperre I'll check them out. Do you know if they worked on the pi 3?

hooperre

@quicksilver No. IIRC, they didn't boot up at all on the Pi 3 and now they get to some sort of menu or something. I can't recall. Only ones that I haven't gotten to work with lr-flycast / reicast.

ETA: Railroad Tycoon didn't boot up at all on the Pi 3, IIRC. Haven't tried with the 4.

George Spiggott

Can the Pi version of LR-Flycast run WinCE games? I know they run slowly on X86 Flycast but I think some of the less demanding games e.g. Worms Armageddon may work at a reasonable speed on a Pi4.

quicksilver

@George-Spiggott it is listed as supporting it

@hooperre however I cannot get worms to run no matter what settings I used. I'm thinking it has to do with the WCE support not working properly on the pi 4. :(

hooperre

@quicksilver Ya I thought so. Thanks for confirming.

quicksilver

@hooperre I read up on it a bit, and some of the talk on the flycast GitHub issue tracker seemed to imply that a 64bit os is needed for the WinCE games to work. Which if true, means we are plumb out of luck.

rejesterd

@quicksilver - This is also an issue for me with certain games in split-screen mode. Those would include Re-Volt and Toy Commander. I'm using reicast. If I set frame skipping to 2, the performance is pretty good (just a tad less smooth, obviously.. but no major choppiness). So I'm using that as a workaround for now.

For reference, Outtrigger works flawlessly in split-screen multiplayer mode, and I don't have to use frame skipping. Outtrigger and Toy Commander are *.gdi, and Re-Volt is *.cdi. So I can't really tell if it's rom-specific or not. At least we can confirm that there's some similarity between reicast and lr-flycast with respect to the split-screen issue.

I'm running this on a rpi4 (no overclocking).

rejesterd

@hooperre - I haven't been able to run Worms Armageddon in reicast. I haven't tried lr-flycast yet. But I get the same runcommand output as I get with other games like Quake 3 Arena:

$ less /dev/shm/runcommand.log 
Parameters: 
Executing: /opt/retropie/emulators/reicast/bin/reicast.sh alsa "/home/pi/RetroPie/roms/dreamcast/WormsArm.cdi" 0 
/opt/retropie/emulators/reicast/bin/reicast.sh: line 90: 23726 Trace/breakpoint trap   "$rootdir/emulators/reicast/bin/reicast" "${params[@]}"

Haven't tracked it down yet.

quicksilver

@rejesterd if you update flycast from source then turn on threaded rendering + synchronous rendering it is better. But in the retroarch menu go to settings>video>synchronization>sync to exact content framerate ON, and this took care of the weird jittery-ness I was getting in flycast. I don't think my TV even has freesync/gsync but it works.

quicksilver

@rejesterd said in Working Dreamcast games:

@hooperre - I haven't been able to run Worms Armageddon in reicast. I haven't tried lr-flycast yet. But I get the same runcommand output as I get with other games like Quake 3 Arena:
$ less /dev/shm/runcommand.log 
Parameters: 
Executing: /opt/retropie/emulators/reicast/bin/reicast.sh alsa "/home/pi/RetroPie/roms/dreamcast/WormsArm.cdi" 0 
/opt/retropie/emulators/reicast/bin/reicast.sh: line 90: 23726 Trace/breakpoint trap   "$rootdir/emulators/reicast/bin/reicast" "${params[@]}"
Haven't tracked it down yet.

You won't be able to run worms because it's a WinCE game, none of the WinCE games work on 32bit flycast and I don't think reicast has WinCE support at all. Quake 3 works fine for me with flycast on my pi 4, I can even connect to online games!

rejesterd

@quicksilver - Think I'm going to try lr-flycast then, because there's a setting in reicast called "synchronous rendering" that does improve the jitters on these games.. but the jitters are still there. So maybe flycast does a better job with this.

Edit: It seems I have to update retroarch because I don't see the video>synchronization section.

mitu

@rejesterd said in Working Dreamcast games:

Edit: It seems I have to update retroarch because I don't see the video>synchronization section.

They moved some of the settings around in the latest version. The setting should be in older versions also, but in a different place (directly under Video maybe).

quicksilver

@mitu Any idea how I can turn that setting on permanently? I am always afraid of messing up my retroarch settings so Im not sure how to make the change globally.

mitu

@quicksilver You can add:

video_hard_sync = true

to your retroarch.cfg, either the global file in /opt/retropie/configs/all or the system's in /opt/retropie/configs/dreamcast/.

EDIT: on a second look, I think the 'sync to exact framerate' might be called vrr_runloop_enable.

quicksilver

@mitu That setting seems to be tied to "gpu hard sync" not "sync to exact content framerate"

Edit: looking through the retroarch.cfg I cannot find a setting that controls "sync to exact content framerate"

rejesterd

Thanks to @mitu and @quicksilver. I installed lr-flycast from source, and the performance on both Re-Volt and Toy Commander is fantastic in split-screen multiplayer mode! This is on an rpi4 btw. The retroarch setting @quicksilver mentioned is, on my version, under Quck Menu > Options > Synchronous Rendering. I set that to ON.

Unfortunately, Quake3 Arena has issues (the screen doesn't split vertically and it's very jittery), but many other games that previously didn't load in reicast (like Wacky Races, for example) work great now with lr-flycast. Thanks so much! Hopefully I'll get the issue with Quake worked out. At least it loads now.

quicksilver

@rejesterd said in Working Dreamcast games:

The retroarch setting @quicksilver mentioned is, on my version, under Quck Menu > Options > Synchronous Rendering. I set that to ON.

That is only one of the settings I mentioned. If you back out of the quick menu then go to: Settings>Video>Synchronization>Sync to exact content framerate. Turn that setting on and it will fix the weird tearing/jitter.

Edit: just tested Quake 3 and I see what you mean about the split screen issue.

quicksilver

@mitu said in Working Dreamcast games:

EDIT: on a second look, I think the 'sync to exact framerate' might be called vrr_runloop_enable.

Thank you that did it!

rejesterd

@quicksilver - I found it. For me, it's under Settings > Frame Throttle > Sync to exact content framerate. I turned that on, but Quake 3 Arena still has trouble. I'll open a thread about it if I can't resolve it soon.