ScummVM Controlller Issues

ExarKunIv

@escc1986

what buttons do you want to do what

escc1986

B = left click

A = Right click

Start = space bar

Select - f5

please .... Thank you

ExarKunIv

@escc1986
ok

run
evtest /dev/input/event0

press the start and select to test them

post what you get

escc1986

@ExarKunIv said in ScummVM Controlller Issues:

evtest /dev/input/event0


Event: time 1581450539.384302, type 4 (EV_MSC), code 4 (MSC_SCAN), value 9000a
Event: time 1581450539.384302, type 1 (EV_KEY), code 313 (BTN_TR2), value 1
Event: time 1581450539.384302, -------------- SYN_REPORT ------------
Event: time 1581450539.579279, type 4 (EV_MSC), code 4 (MSC_SCAN), value 9000a
Event: time 1581450539.579279, type 1 (EV_KEY), code 313 (BTN_TR2), value 0
Event: time 1581450539.579279, -------------- SYN_REPORT ------------
Event: time 1581450540.749286, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90009
Event: time 1581450540.749286, type 1 (EV_KEY), code 312 (BTN_TL2), value 1
Event: time 1581450540.749286, -------------- SYN_REPORT ------------
Event: time 1581450540.959255, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90009
Event: time 1581450540.959255, type 1 (EV_KEY), code 312 (BTN_TL2), value 0
Event: time 1581450540.959255, -------------- SYN_REPORT ------------

start is = tr2

select is = tl2

ExarKunIv

@escc1986

run this

sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
	--evdev /dev/input/event0 \
	--silent \
	--detach-kernel-driver \
	--force-feedback \
	--mimic-xpad \
	--trigger-as-button \
	--evdev-absmap ABS_HAT0X=dpad_x,ABS_HAT0Y=dpad_y \
    --evdev-keymap KEY_#305=a,KEY_#304=b,KEY_#307=x,KEY_#308=y,KEY_#310=tl,KEY_#311=tr,KEY_#312=select,KEY_#313=start \
	--ui-axismap dpad_x=REL_X:10,dpad_y=REL_Y:10 \
	--ui-buttonmap a=BTN_LEFT,b=BTN_RIGHT,select=KEY_F5,start=KEY_SPACE \
	--ui-buttonmap guide=void,x=void,y=void,lb=void,rb=void,tl=void,tr=void,lt=void,rt=void,back=void \
	--ui-axismap x2=void

escc1986

@ExarKunIv said in ScummVM Controlller Issues:

sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv
--evdev /dev/input/event0
--silent
--detach-kernel-driver
--force-feedback
--mimic-xpad
--trigger-as-button
--evdev-absmap ABS_HAT0X=dpad_x,ABS_HAT0Y=dpad_y
--evdev-keymap KEY_#305=a,KEY_#304=b,KEY_#307=x,KEY_#308=y,KEY_#310=tl,KEY_#311=tr,KEY_#312=select,KEY_#313=start
--ui-axismap dpad_x=REL_X:10,dpad_y=REL_Y:10
--ui-buttonmap a=BTN_LEFT,b=BTN_RIGHT,select=KEY_F5,start=KEY_SPACE
--ui-buttonmap guide=void,x=void,y=void,lb=void,rb=void,tl=void,tr=void,lt=void,rt=void,back=void
--ui-axismap x2=void

Works good :)

ExarKunIv

@escc1986

good

so you have both a runcommd-onstart and a runcommad-onend file made correct

escc1986

i belive so

how may i check

ExarKunIv

@escc1986

well i know you have the runcommand-onstart i saw the vid

put this in the runcommand-onstart

#!/bin/sh

if [ "$1" = "scummvm" ]
then
sudo killall > /dev/null 2>&1 xboxdrv
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv > /dev/null 2>&1 \
--evdev /dev/input/event0
--silent
--detach-kernel-driver
--force-feedback
--mimic-xpad
--trigger-as-button
--evdev-absmap ABS_HAT0X=dpad_x,ABS_HAT0Y=dpad_y
--evdev-keymap KEY_#305=a,KEY_#304=b,KEY_#307=x,KEY_#308=y,KEY_#310=tl,KEY_#311=tr,KEY_#312=select,KEY_#313=start
--ui-axismap dpad_x=REL_X:10,dpad_y=REL_Y:10
--ui-buttonmap a=BTN_LEFT,b=BTN_RIGHT,select=KEY_F5,start=KEY_SPACE
--ui-buttonmap guide=void,x=void,y=void,lb=void,rb=void,tl=void,tr=void,lt=void,rt=void,back=void
--ui-axismap x2=void

&
fi

escc1986

ok , i pasted in runcommand-onstart and rebooted my device

just tested it

appears as same as before , dpad not working and L is space & R is f5

ExarKunIv

@escc1986

ok so the problem now is getting the game and the script we just made to work together.

escc1986

humm interesting , i wonder why they dont work together

ExarKunIv

@escc1986
they do
you just need everything on the same page.

IE
correct drivers turned on, correct names ETC....

i use a different method now so i have not messed with it this way in a long time
and you have a bunch of little things you did, which is not wrong but not needed. so they might be giving a problem.

give me a bit i want to try something on my system

escc1986

sure , take as much time needed :) ... hope you could figure something out

ExarKunIv

@escc1986

so the way i do things now is i have a command that gets ran when i pick a certain game, unlike the way we where just playing with. that way is always running in the back ground in a way waiting for a game that needs is to start and away it goes.

so im hoping that i can get my way to work and we can go from there, cuz i think even with what ever settings or naming that has been done it will not matter.

plus if you get to any other games that need something custom like the games in PORTS. it is very easy to copy and past from one to the other

escc1986

Fascinating ... i hope you way , will be the way to go :)

ExarKunIv

@escc1986

ok here goes, from what i was able to test it does work on my system and it does over ride whatever preconfiged controls

in the rom/scummvm folder open the +start scummvm.sh and add this line under the #!/bin/bash but before anything else

sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv >> /dev/shm/runcommand.log 2>&1 --evdev /dev/input/event0 --config /opt/retropie/configs/all//xdrive/scumm.cfg &

dont forget to change the event number to match yours

now in the config folder go to the all folder and make a new folder named xdrive

in there make a new file called scumm.cfg
in there paste this

[xboxdrv]
silent=true
deadzone=4000
deadzone-trigger=15%
dpad-as-button=false
trigger-as-button=true
detach-kernel-driver=true
#force-feedback=true
mimic-xpad=true

[evdev-absmap]
ABS_X=x1
ABS_Y=y1
ABS_Z=x2
ABS_RZ=y2
ABS_HAT0X=dpad_x
ABS_HAT0Y=dpad_y

[evdev-keymap]
BTN_SOUTH=a
BTN_EAST=b
BTN_NORTH=x
BTN_WEST=y
BTN_TL=lb
BTN_TL2=lt
BTN_TR=rb
BTN_TR2=rt
BTN_SELECT=back
BTN_START=start
BTN_THUMBL=tl
BTN_THUMBR=tr

[ui-axismap]
x1=KEY_LEFT:KEY_RIGHT
y1=KEY_DOWN:KEY_UP
dpad_x=REL_X:10
dpad_y=REL_Y:10

[ui-buttonmap]
a=BTN_LEFT
b=KEY_LEFTCTRL
x=KEY_ENTER
y=KEY_R
lb=KEY_C
lt=KEY_A
rb=KEY_SPACE
rt=KEY_D
back=KEY_F5
start=KEY_ESC
tr=KEY_K
tl=KEY_Y

# EOF #

now of corse you need to change the buttons to mactch your controller.
these are from my setup

there will be some fine tuning that you will need to do, but this i hope should get you to work.

escc1986

Question :

How do you create a new folder "xdrive" in command ?

I made a mistake and

Sudo nano xdrive ( sudo nano means txt from what I found out )

How do you create a new folder ?

ExarKunIv

@escc1986

mkdir /opt/retropie/configs/all/xdrive

to make the config file
then sudo nano /opt/retropie/configs/all/xdrive/scumm.cfg

i just network into mine from the computer and use explorer to do most of everything
so i just right click for everything, lol

escc1986

@ExarKunIv said in ScummVM Controlller Issues:

[xboxdrv]
silent=true
deadzone=4000
deadzone-trigger=15%
dpad-as-button=false
trigger-as-button=true
detach-kernel-driver=true
#force-feedback=true
mimic-xpad=true

[evdev-absmap]
ABS_X=x1
ABS_Y=y1
ABS_Z=x2
ABS_RZ=y2
ABS_HAT0X=dpad_x
ABS_HAT0Y=dpad_y

[evdev-keymap]
BTN_SOUTH=a
BTN_EAST=b
BTN_NORTH=x
BTN_WEST=y
BTN_TL=lb
BTN_TL2=lt
BTN_TR=rb
BTN_TR2=rt
BTN_SELECT=back
BTN_START=start
BTN_THUMBL=tl
BTN_THUMBR=tr

[ui-axismap]
x1=KEY_LEFT:KEY_RIGHT
y1=KEY_DOWN:KEY_UP
dpad_x=REL_X:10
dpad_y=REL_Y:10

[ui-buttonmap]
a=BTN_LEFT
b=KEY_LEFTCTRL
x=KEY_ENTER
y=KEY_R
lb=KEY_C
lt=KEY_A
rb=KEY_SPACE
rt=KEY_D
back=KEY_F5
start=KEY_ESC
tr=KEY_K
tl=KEY_Y

EOF

[evdev-absmap]
ABS_X=x1
ABS_Y=y1
ABS_Z=x2
ABS_RZ=y2
ABS_HAT0X=dpad_x
ABS_HAT0Y=dpad_y

i dont understand ... how to change it to mine , can you help me