My Realistic Arcade Overlays for Retroarch Collection

Orionsangel

Here is a realistic Arcade overlay with a tilted screen for the game Vapor TRX for use on Retroarch.

Vapor TRX.jpg

simpleethat

it never ceases to amaze me how awesome these are

Orionsangel

Here is a realistic Arcade overlay for the game, Zaxxon for use on Retroarch.
This will be coming soon for download in my Realistic Arcade Tilted Screen Bezel
Pack for Retroarch.

timocologne

thanks for your effort!! i always liked your desings best... and i used to use them on an older system of mine..
but now i started a designated retropie project but cannot seem to get your bezels working...

have you yourself tried it on a pi?

or can someone else here tell me, where to copy the folders to?

because... inside your pack there is a folder that contains the images and cfg files all in one folder, and then there is a config folder with cfg files, that are different from the first...

and... does my system have to be free of any other bezels that are pointed to? because i trie
d out the bezel project and i now wantto replace their overlays and config files with yours

UDb23

@timocologne There should be no problem installing other overlays.
How to manually install is explained in my repo.

timocologne

i was talking about the config files that come with orionsangel's bezels.. which seem to include the height and width of the viewport, but are not recognized by my system so that i would have to adjust them manually all over again...
but there must be a way, to get benefits from all the hard wrk orionsangel did to figure out those values

Orionsangel

Here is a realistic Arcade overlay for the game, Terminator 2: Judgement Day for use on Retroarch.

Orionsangel

Here is a realistic Arcade overlay for the game, Alien Vs. Predator for use on Retroarch.

This arcade overlay is coming soon in Pack #2.

Orionsangel

Here is a realistic Arcade overlay for the Nintendo Red Tent cabinet of Vs. Super Mario Bros for use on Retroarch

Orionsangel

Here is a realistic Arcade overlay for the Nintendo Red Tent cabinet of Vs. Castlevania for use on Retroarch

timocologne

i finally figured out, why the cfg files are not working.
i myself am a linux and retroarch/retropie newbie... so it took me bit longer

orionsangel delivers two folders... one of them containing the cfg files with the viewport measurements, that itself linkingto the overlay folder and the config file that is stored there.

the syntax in that first batch of config files is windows based... so the linux system could not understand the directories. for example:

3stooges.cfg

custom_viewport_height = "577"
custom_viewport_width = "756"
custom_viewport_x = "569"
custom_viewport_y = "360"
input_overlay = ":\overlays\arcade\3stooges.cfg"

to get it to work, follow these steps:

run a text replacer. i used the free version of "TextCrawler"
in orions package.... we're dealing with the files in the directory:
Retroatch (sic!) - config - MAME
in all *.cfg files in that directory replace every \ with a / , and then every : with a ~
to make the last lines look like this:

input_overlay = "~/overlays/arcade/3stooges.cfg"

this now points to your raspberry pi's directory:
/home/pi....

so now , from orions package, go to subfolder "Retroatch" (sic!) and copy the whole subfolder "overlays" to your /home/pi/, thus creating the structure:
/home/pi/overlays/arcade/.... that is pointed to from the cfg files that have been changed.

the last step is, to copy all changed cfg files from orionsangel's package , directory Retroatch - config - MAME
to your pi.
Head to the directory /opt/retropie/configs/all/retroarch/config
in there you'll find all the different emulators needed to run the various arcade games
go ahead and EITHER copy just the ones that correspond to the emulator that is used to run the game into said subfolder, bbecause.... in orionsangel'S package all cfg files are mixed in together and not seperated by emulators...
OR copy every cfg file (50kb in total) to all the possible emulator folders (fba, mame2003, mame2010 etc....) to make sure, each emulator core finds a cfg if needed...
a bit of an overkill, i know... but as is said... i am a newbie... and if someone else could tell me, that there is an easier solution, i'd be glad to know.

that's all for now... i'm off to play some old school classics now... and am looking forward to part two of orionsangels work. a big shout out again to him!

Orionsangel

@timocologne You're a genius! Thank you!

Orionsangel

Here is a realistic Arcade overlay for the game, Cyber Police: E-SWAT for use on Retroarch.

Thanks to the talented, UDb23 who masterfully recreated this bezel.

You can download it here - https://bit.ly/2UTPgWs

UDb23

@Orionsangel Excellent work as usual !

Orionsangel

Here is a realistic Arcade overlay for the game, Time Soldiers for use on Retroarch.

Thanks to ArsInvictus for finding the HQ bezel for this Arcade game.

This bezel is coming soon in Pack #2

Orionsangel

These are updates to my realistic Neo Geo Arcade bezels now for Retroarch. I've been sitting on these for a while. I thought it was time I release them. Hope you guys like them.

Download the Neo Geo collection here - https://bit.ly/2UTh5PI

Orionsangel

Here is a realistic Arcade overlay for the game, Akai Katana for use on Retroarch

Thanks to ArsInvictus for allowing me to use his amazing bezels. A true talent!

This bezel is coming soon in Pack #2

Orionsangel

Here is a realistic Arcade overlay for the game, Astro Blaster for use on Retroarch

This bezel is coming soon in Pack #2

astrob (1).jpg

astrob (2).jpg

astrob (3).jpg

Orionsangel

I updated some of the bezels on my Retroarch Overlay Pack #1. I do this behind the scenes. So you might download the pack again every so often and notice some changes to certain bezels. You'll know which ones were updated by the date next to each file.

Retroarch Overlay Pack #1 - https://bit.ly/356TPBe

Orionsangel

Here is a realistic #Arcade overlay for the game #Caliber50 for use on #Retroarch