Unable to scrape, unable to update
-
@ElrasM Re-installing would wipe out everything. You can backup your current image which would save everything you currently have (all images, settings, etc). However, if you are re-installing for the purpose of the scraper, I wouldn't for now since everyone is having the same problem with the scraper.
-
Ok, thanks again.
It's a little bit frustrating that all the effort put in the retropie until now should be for nothing. But you may be right, a clean install might be a better start for future issues.
I will try the tutorial posted here.
And for the scraper i maybe will wait or try the reddit tutorial.
-
@ElrasM said in Unable to scrape, unable to update:
Wouldn't a new installation after https://retropie. org. uk/forum/topic/3/read-this-first lead to the fact that everything would be lost?
You can back-up your games/configs/artwork - https://retropie.org.uk/docs/Updating-RetroPie/#making-a-backup-option-2 - and transfer back after the re-installation.
Does anyone know a reason for the error messages when trying to update? Maybe a solution as well.
Well, you have a solution, though it's not the one you expected. Follow the manual installation method outlined in the Docs and don't follow - grossly - outdated and incorrect videos.
-
@mitu said in Unable to scrape, unable to update:
You can back-up your games/configs/artwork - https://retropie.org.uk/docs/Updating-RetroPie/#making-a-backup-option-2 - and transfer back after the re-installation.
That's a great idea. I'm on it.
Well, you have a solution, though it's not the one you expected. Follow the manual installation method outlined in the Docs and don't follow - grossly - outdated and incorrect videos.
Yeah, you are right. But in this case YouTube brought me to the idea of using retropie. So it was my first source.
Btw: It's crazy that some people sell whole images for the Ras Pi 4 with pre installed roms on ebay for a plenty amount of money. Giving the feeling that setting up retropie is a money worth work.
-
@ULTRA-MAGNUSS said in Unable to scrape, unable to update:
I ran skyscraper to update the videos for a few new games I added and it wiped out the game list for some of my emulators because it didn't pull back anything
This makes no sense to me. Skyscraper doesn't wipe a gamelist. It has no mode that would do that unless it runs from an empty cache. And the cache can only be cleared / purged by the user.
-
Screenscraper currently is only letting registered users scrape. Retropie's scraper does not pass Screenscraper credentials to their website, so you'll get an error. This has all happened within the last couple days.
-
use the pc version of the scraper it is 100% faster,it can scrape 2k roms in 30minutes or 20minutes and if you scraped in raspberry pi it will take half a day or whole day.
-
@simonc said in Unable to scrape, unable to update:
use the pc version of the scraper it is 100% faster,it can scrape 2k roms in 30minutes or 20minutes and if you scraped in raspberry pi it will take half a day or whole day.
For both Skyscraper and probably SSelph's scraper, this is incorrect. This might be true when using the EmulationStation built-in scraper compared to Skraper on Windows when using ScreenScraper as the source. For Skyscraper at least it is way faster when you have entered your ScreenScraper credentials correctly in the configuration. We're talking about 2000 roms in 30 minutes or maybe even less.
-
I got the skyscraper to work by registering a username and password on https://www.screenscraper.fr/ (i had to use IE, not google chrome). Then I edited my /opt/retropie/configs/all/skyscraper and edited my config.ini file. I edited the lines with the userCreds with my username and password and the line above it.
[screenscraper]
userCreds="MyUser:MyPassword"Make sure you remove the # that's in front. Save it. You can only run the SkyScraper from command line. The scraper in Emulation Station still doesn't work.
-
Referring to my original post: The new install as descriped in docs fixed my problems and almost all errors. (I will make a seperate post for that)
Scraping seems to work with skycraper although, as mentioned here, GamesDB gives me a limited amount of scrapes per month and screenscraper.fr needs a registration.
Thank you for your help.
-
@ULTRA-MAGNUSS I followed your instructions, got an account and modified the config.ini file with my userId and password, and uncommented out the line, plus added the [screenscaper] line above it.
I'm running skyscraper from the retropie-setup.sh.
But when the job is running, I'm getting the error "The screenscaper serviced is currently closed or too busy to handle requests from unregistered and inactive users..."
Is there something else that I am missing?
Thanks.
-
@corminos said in Unable to scrape, unable to update:
Is there something else that I am missing?
Can you post exactly the what you entered in the
config.inifile (minus the password) ? -
@mitu
I found the problem. I had misspelled "screenscraper". I was looking over what I had pasted just to make sure I didn't look like an idiot...and realized I'm an idiot.The bottom section is below for anyone wanting to look, where XXXXX is my user name, and YYYYYY is my password. I uncommented out the videos and set the value to "true".
#[<SCRAPING MODULE, eg 'screenscraper'>]
[screenscraper]
userCreds="XXXXX:YYYYYYY"
#threads="1"
#minMatch="0"
#maxLength="10000"
#interactive="false"
#cacheCovers="true"
#cacheScreenshots="true"
#cacheWheels="true"
#cacheMarquees="true"
videos="true"
#videoSizeLimit="42" -
@corminos glad you got it to work. If anyone figures out how to get the scraper to work from emulation station, please post a solution.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.