[Amiga] Amiberry + WHDLoad = Holy Grail - Amiberry's official thread

nemo93

@Stuffu ok here's my feedback about CD and CD32 games with Amiberry.

CD
Amiga CD support is not implemented yet. I don't know if there's any plan to add it at some point. I just got this ticket as reference. There's still a way though to get Amiga CD game to run on Pi via Amiberry. Some nice fellows did manage to pack those games within HDF files. You have to google a bit but if you get your hands on some then try the following.
1. Launch Amiberry.
2. Pick a A1200 config in Quickstart section
3. Go to Hard drives / CD. Add a harddrive file and point to where you've stored the hdf containing your game.
4. Hit Reset

If all goes well you should go straight to the Workbench with a mounted directory named after your game. Double-click on that and on the icon to launch the game. I do confirm I was able to run and play Wasted Dreams. The FMV intro plays absolutely smooth and so the game!

If the above works, enter Amiberry GUI once again, go to Configurations and ensure to save it. That way you could launch the game straight from ES/Pegasus next time by pointing to the .uae instead!

CD32
It's supported no problem. I've tried with Kid Chaos which comes with CD-DA tracks and it works absolutely fine. Ensure to select "CD32" in Quickstart section and point to your cue/iso. As simple as that.

What's left is to run a cue/hdf straight from ES/Pegasus. I'm testing that right now.

Stuffu

@nemo93 Maybe I just tried some bad HDF files before then. Gave up on that after a few tries but will give it a go again!

WHDLoad support won’t be coming I guess. Reached out to the team but it seemed unlikely that anything would happen with CD games. But a workaround is better than nothing :)

nemo93

I do confirm CD games via HDF are working flawlessly. If it doesn't work try with other HDFs. I then launch these via a .uae. If you ask me to I could share such uae. Also to confirm Wasted Dreams and onEscapee are pure gems.

For CD32 there's a trick. There's the -autoload= parameter of Amiberry for running those games. Just ensure to rename your .cue file to the CD32 name found inside the whdload_db.xml.

E.g. let's assume I want to run Chaos Engine CD32:
1. Put all cue/bin files inside my "roms" folder.
2. Then double-check inside the .cue to be sure it points to the corresponding .bin file(s).
3. Take a peek inside the the whdload_db.xml to see what name to chose. This one looks a fine candidate => ChaosEngine_v2.1_CD32.
4. Simply rename the .cue with that name and run Amiberry with it.

$ amiberry -autoload=ChaosEngine_v2.1_CD32.cue -G

Amiberry will launch with CD32 settings already applied. You could check that by entering the GUI. If you're willing to launch straight from ES/Pegasus, simply ensure the .cue extension is added to the systems list.

Stuffu

@nemo93 I would be happy if you shared the .uae :) the CD32 games are WHDloads and works just fine...

McCarthy

Help needed. With my setup no configuration file per game is saved. Every time I want to specify game specific configurations it doesn't give me the option for saving it, it always uses the default configuration file. With previous versions it saved a config file for each game, that doesn't seem to work anymore.

nemo93

hey @Stuffu! sure thing. Here you go => Wasted Dreams uae. Nothing fancy as you'll see.

to all @midwan kindly updated Amiberry's parameters to make it easier to launch CD32 games. Please check this ticket here. In short there are now -model=CD32 and -cdimage=<something>.cue/iso supported. Way easier than my process above! The below should work:

$ amiberry -model=CD32 -cdimage=ChaosEngine_CD32.cue -G

nemo93

hello @McCarthy ! Let's see how and if we could be of assistance here :-) Would you be kind enough to elaborate on the steps you've been through? I'm using configurations a lot recently and it goes well on that front so far. Usually after running the game I'm entering the GUI, head up to Configurations and hit the Save button. Given the emulator already relies on the name of the game file as the uae name that's really all I have to do to save my uae config.

Don't forget to share your exact setup also please.

McCarthy

I have a rpi3 b+ with the latest RetroPie. When I load adf files it doesn't save a unique config file for the game, but when I use Whdload games it works.

Stuffu

@nemo93 said in [Amiga] Amiberry + WHDLoad = Holy Grail - Amiberry's official thread:

hey @Stuffu! sure thing. Here you go => Wasted Dreams uae. Nothing fancy as you'll see.

to all @midwan kindly updated Amiberry's parameters to make it easier to launch CD32 games. Please check this ticket here. In short there are now -model=CD32 and -cdimage=<something>.cue/iso supported. Way easier than my process above! The below should work:
$ amiberry -model=CD32 -cdimage=ChaosEngine_CD32.cue -G

Worked fine with the uae, thanks again. Didn’t get the controller to work though, think we have different setup with joystick/mouse. But it’s a start and I just have to hook up a mouse I guess. There are some fine pieces I’m going to try out :)

nemo93

excellent @Stuffu glad it works. I'm sure you'll figure the controller(s) out. It works here (mouse/keyboard/joy) no issue.

@McCarthy it's not a very good answer to you but any reason(s) you want to stick to ADF instead of WHD packages? I can only recommend packages as it will ease a lot the emulation. If you really needs it you'll have to raise a ticket on Amiberry's Github to seek for a solution (unless someone's else does have the answer!).

baldrick

Hey there all, new member first time poster
Trying to install Amiberry from Source on Pi4
Getting the following:
Error running 'git clone --recursive --depth 1 --branch master https://github/midwan/amiberry
/home/pi/RetroPie-Setup/tmp/build/amiberry' - returned 128

Any ideas?!

mitu

@baldrick Please open a new topic and add the info requested in https://retropie.org.uk/forum/topic/3/read-this-first.

Stuffu

@nemo93 said in [Amiga] Amiberry + WHDLoad = Holy Grail - Amiberry's official thread:

hello @Stuffu! Ah Barbarian... it's a tough one :-) This one gave me a lot of headache. My proposed fix should work indeed yet as always @HoraceAndSpider is right. The simple straightforward fix is as follows:

Use your current whdload_db.xml or an updated version

Launch Barbarian_v1.1_Palace_1784 with Amiberry (I take it's the one you were talking about in which you could chop your opponent's head :)).

At this point it's likely you'll get straight to Amiberry GUI

Go to the ROM section

Set ROM to Kickstart v2.05 r37.350 (1992)(Commodore)(A600HD)[!].rom (3.1 (A500,A600,A2000) rev 40.63 should also work or any similar to Kickstart v3.1 rev 40.63 (1993)(Commodore)(A500-A600-A2000)[!].rom. Check doc for details about this exact KS.)

Hit the Restart button

An easier fix is just adding the 2.05 kickstart, that works as well. I’m pretty sure it was added quite recently in the wiki, but might be wrong. I didn’t have it before and adding it fixed it, Barbarian (palace) launches as expected with doing anything else.

g0nz0uk

Hi,

Is there a why to add a bezel to fill the blank blank sides in at all like some of the other emulators?

Cheers

g0nz0uk

Hello,

I've been playing a great football game called Goal in Amiberry and back in the 1990s a friend and I would play this all the time. We use to edit all the teams and players names and save them to separate disk if I remember.

How can I do this with Amiberry?

I want to update the teams and then give to my friend who is also playing Amiberry on the Pi.

Thanks

stevas

Should I be able to switch resolutions through runcommand with amiberry?
Works fine with other emulators, not sure if I got something screwy going on with a config set somewhere, or if it just plain doesn't work with this one...

nemo93

All,

quite a lot of small improvements have been made to Amiberry lately thanks again to @midwan. If you upgrade from the latest source don't forget to update the XML file as usual to ensure everything remains smooth. Also always check if there's a new version for your WHD (lha) packages.

The most common issue you're likely to face in case you have an outdated XML along with Amiberry 3.2+ is that screen will be cut in half. If this happens => update XML please.

There's a new auto-height feature that has been added. Even if it should work in many games it might not be the case 100% of the time. For now it's being disabled by default as extensive testing has to be conducted. It's only enabled for Agony to show the benefit (no more cut in the lovely intro screens, everything will be full height all the time).

George Spiggott

Auto screen height causes the screen to go black with the games I tried it with.

nemo93

@George-Spiggott can you please share names of some of those games please?

Note: with fixed height it usually works better hence why auto-height is currently off by default (or set only when game has no default height). It's just that in some games (like Agony) it prevents some screens to be cut. The corner case is Alien Breed Tower Assault or Blood Money: with auto-height intro screens are not cut off but you got flickering or other weird behaviours.

George Spiggott

@nemo93 I tried Auto Height with Agony, Speedball and Turrican. All three of them show a black screen. I can turn the settings on and off to get a picture but the black screen returns when the screen changes e.g. when the high score screen comes on for Turrican.