Horizontal retropie display. HELP

[A Former User]

@mitu If I start any game it looks like this, I attach a photo, this is an example of gta vice city:

[mitu]

Either RetroArch doesn't detect the resolution correctly or there's a scaling issue. Try adding video_fullscreen_x and video_fullscreen_y to your retroarch.cfg and populate it with the correct values for your screen, see if that makes a difference.

[A Former User]

@mitu if I put it this way the game does not change from the previous photo:
video_windowed_position_height = "480" video_windowed_position_width = "800" video_windowed_position_x = "800" video_windowed_position_y = "480"
and:
video_windowed_position_height = "800" video_windowed_position_width = "480" video_windowed_position_x = "800" video_windowed_position_y = "480"
if i put it like this when i open the raspberry, i only see retropie and no emulator:
video_windowed_position_height = "480" video_windowed_position_width = "800" video_windowed_position_x = "480" video_windowed_position_y = "800"
and:
video_windowed_position_height = "800" video_windowed_position_width = "480" video_windowed_position_x = "480" video_windowed_position_y = "800"

[A Former User]

@xTekFede sorry I hadn't seen you meant fullscreen

[A Former User]

@mitu if the monitor is 800x480, what should i put in x and what in y?

[A Former User]

@mitu sorry for all the time I'm stealing you

[mitu]

@xTekFede said in Horizontal retropie display. HELP:

@mitu if the monitor is 800x480, what should i put in x and what in y?

Well, you only have 2 choices here - have you tried them both ?

[A Former User]

@mitu I tried 800 in y, and 480 in x, and on the contrary, one makes me lose the emulators and the other does not change the resolution

[mitu]

@xTekFede In this case, you should look in the Settings -> Video -> Scaling and see if changing the parameters there makes a difference.

[A Former User]

@mitu Thank you thank you, I was going crazy, in the end I had to put the scaling to 1 and put

aspect_ratio_index = "1"

Thank you very much, From the heart, I LOVE YOU , Thank you very much
Just one thing, I put in the cmdline.txt
video = HDMI-A-1: 480x800M @ 60rotate = 90
with the various settings but it doesn't work

[mitu]

@xTekFede said in Horizontal retropie display. HELP:

video = HDMI-A-1: 480x800M @ 60rotate = 90

You shouldn't have any spaces in the boot parameter

video=HDMI-A-1:480x800M@60rotate=90

[A Former User]

@mitu There are no spaces, sorry I was wrong to copy

[mitu]

Try this:

video=HDMI-A-1:480x800M@60,rotate=90

[A Former User]

@mitu If I put the comma remains vertical, but for a second in the initial load it turns and then returns vertically

[A Former User]

It works but not in the boot, it does nothing THANK YOU SO MUCH

[A Former User]

Wait I just noticed one thing, that setting 16:9 works the games at 16:9 but not the ones at 4:3 how do I do? I would like to change to individual emulators can you?

[mitu]

Try turning off 'Integer Scaling' and remove the 'scale factor' so RetroArch scales it to the window height/width.

[A Former User]

This post is deleted!

[A Former User]

@mitu without Integer Scaling it returns crushed

[A Former User]

@mitu I noticed that if I activate Integer Scaling the psp works normally, but the retroarch settings don't work anymore, and if I deactivate Integer Scaling, the settings go but the games are crushed