Guide: Advanced Controller Mappings

ExarKunIv

@daanv98 nothing is jumping out at me.

i need to look back at my old comments and see what you need to paste in the ssh once your game is going, when you do that, it helps find the error.

well it did for me

ExarKunIv

@daanv98 you should try running it from the command line. just to see if it works,
it would be (start the game first )

sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv
	--evdev /dev/input/event[4] \
	--silent \
	--detach-kernel-driver \
	--force-feedback \
	--mimic-xpad \
	--dpad-as-button \
	--deadzone 4000 \
	--trigger-as-button \
	--evdev-no-grab \
	--device-name "Player Red" \
	--evdev-absmap ABS_X=x1,ABS_Y=y1 \
	--evdev-keymap BTN_TOP=a,BTN_PINKIE=b,BTN_THUMB2=x,BTN_TOP2=y,BTN_TRIGGER=lt,BTN_THUMB=rt,BT_BASE4=start,BTN_BASE3=back \
	--ui-axismap x1=REL_X:07,y1=REL_Y:-07 \
	--ui-buttonmap rt=BTN_LEFT,lt=BTN_RIGHT,start=KEY_ENTER,back=KEY_ESC,a=KEY_SEMICOLON,b=KEY_APOSTROPHE,x=KEY_LEFTBRACE,y=KEY_RIGHTBRACE \
	--ui-buttonmap guide=void \

if everything work it will work. if not then a error will pop up and you can go from there

daanv98

@ExarKunIv Apparently the weird error was because of some empty line I added in the mapping file accidentally. However the controls still don't work. By running

sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv

from the command line (in PuTTY), I get an error which says:
No Xbox or Xbox360 controller found

Did I forget to set anything up?

ExarKunIv

@daanv98 you need to put everything that is in the box i posted

daanv98

@ExarKunIv I did, but after the first line it gives the error.

daanv98

@ExarKunIv I added \n after the first line and then it works. There was an error which told me that BT_BASE4 doesn't exist. I fixed that to BTN_BASE4. Now its says this:

ExarKunIv

@daanv98

 /dev/input/js2
 /dev/input/event5

means that the mapping it working

your error is something with the game and/or it working with xboxdrv

sadly i dont have any dosgames on my system. i messed it up while messing with compiling other ports. so i cant help much.
and i have gotten away from using that mapping style.

# DOS configuration of Abuse for 8bitDo
# ==================================================
#
# This configuration file is for use with Abuse, a DOS game.

[xboxdrv]
silent = true
detach-kernel-driver = true
deadzone-trigger = 15%
deadzone = 4000
mimic-xpad = true
dpad-as-button = true
trigger-as-button = true

[evdev-absmap]
ABS_X=x1
ABS_Y=y1
ABS_Z=x2
ABS_RZ=y2
ABS_HAT0X=dpad_x
ABS_HAT0Y=dpad_y

[evdev-keymap]
BTN_SOUTH=a
BTN_EAST=b
BTN_NORTH=x
BTN_WEST=y
BTN_TL=lb
BTN_TL2=lt
BTN_TR=rb
BTN_TR2=rt
BTN_SELECT=back
BTN_START=start
BTN_THUMBL=tl
BTN_THUMBR=tr

[calibration]
x1 = -32767:0:32767
y1 = -32767:0:32767
x2 = -32767:0:32767
y2 = 32767:0:-32767

[ui-axismap]
x1=KEY_LEFT:KEY_RIGHT
y1=KEY_DOWN:KEY_UP
x2=REL_X:13
y2=REL_Y:13

[ui-buttonmap]
rt=BTN_LEFT
b=BTN_RIGHT
x=KEY_ENTER
back=KEY_F5
start=KEY_ESC
lt=KEY_LEFTCTRL

# EC #

ExarKunIv

this way just seemed easyer for me and it was easy to get it to launch with the games

#!/bin/bash

sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv >> /dev/shm/runcommand.log 2>&1 --evdev /dev/input/event0 --config /opt/retropie/configs/all//xdrive/abuse.cfg &

"/opt/retropie/supplementary/runcommand/runcommand.sh" 0 _PORT_ "abuse" ""

daanv98

@ExarKunIv I finally got it to work!! First i tried this in the command line:

sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \--evdev /dev/input/event4 \--silent \--detach-kernel-driver \--force-feedback \--mimic-xpad \--dpad-as-button \--deadzone 4000 \--trigger-as-button \--evdev-no-grab \--device-name "Player Red" \--evdev-absmap ABS_X=x1,ABS_Y=y1 \--evdev-keymap BTN_TOP=a,BTN_PINKIE=b,BTN_THUMB2=x,BTN_TOP2=y,BTN_TRIGGER=lt,BTN_THUMB=rt,BTN_BASE4=start,BTN_BASE3=back \--ui-axismap x1=REL_X:-3,y1=REL_Y:3 \--ui-buttonmap rt=BTN_LEFT,lt=BTN_RIGHT,start=KEY_ENTER,back=KEY_ESC,a=KEY_SEMICOLON,b=KEY_APOSTROPHE,x=KEY_LEFTBRACE,y=KEY_RIGHTBRACE \--ui-buttonmap guide=void \

Notice that there are no spaces between \ and --. This worked right away!

Then I started looking at the runcommand-onstart file. I noticed that the first line referred to 'dosbox'. I changed it to 'pc'. And it works now! My file now looks like this:

if [ "$1" = "pc" ]
then
sudo killall >> /dev/shm/runcommand.log 2>&1 xboxdrv
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv >> /dev/shm/runcommand.log 2>&1 \
  --evdev /dev/input/event4 \
  --silent \
  --detach-kernel-driver \
  --force-feedback \
  --mimic-xpad \
  --dpad-as-button \
  --deadzone 4000 \
  --trigger-as-button \
  --evdev-no-grab \
  --device-name "Player Red" \
  --evdev-absmap ABS_X=x1,ABS_Y=y1 \
  --evdev-keymap BTN_TOP=a,BTN_PINKIE=b,BTN_THUMB2=x,BTN_TOP2=y,BTN_TRIGGER=lt,BTN_THUMB=rt,BTN_BASE4=start,BTN_BASE3=back \
  --ui-axismap x1=REL_X:-07,y1=REL_Y:07 \
  --ui-buttonmap rt=BTN_LEFT,lt=BTN_RIGHT,start=KEY_ENTER,back=KEY_ESC,a=KEY_SEMICOLON,b=KEY_APOSTROPHE,x=KEY_LEFTBRACE,y=KEY_RIGHTBRACE \
  --ui-buttonmap guide=void \
&
fi

Huge thanks for your time! I appreciate it.

ExarKunIv

@daanv98 glad you got it working, happy i could help out

jaamulberry

Is there an updated link as the github link ends up at a dead page?

ExarKunIv

@jaamulberry here it was moved to the main Docs page