Blake Stone - BStone source port

tpo1990

@tomybyte Did you try @dudleydes 's solution?

It should only be necessary to kill xboxdrv service and then the RetroPie mappings should work as normal again.

Let me check my stop command for xboxdrv and get back to you later.

tomybyte

Hi @tpo1990
so I found the solution for my Pi4...
To reuse xboxdrv You have to start it on boot:
RetroPie Setup > Configuration / Tools > xboxdrv - XBox / XBox360 gamepad driver > Enable xboxdrv
after that You have two configurations:
/opt/retropie/configs/all/retroarch-joypads
Xbox 360 Wireless Receiver (XBOX).cfg > with disabled xboxdrv
Xbox Gamepad (userspace driver).cfg > with enabled xboxdrv
Then You can kill it and start it again and again!

e.g. Blake Stone - Planet Strike.sh

#!/bin/bash
sudo killall > /dev/null 2>&1 xboxdrv
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
	--detach-kernel-driver \
	--silent \
	--force-feedback \
	--deadzone-trigger 15% \
	--deadzone 4000 \
	--mimic-xpad \
	--trigger-as-button \
	--evdev-absmap ABS_X=x1,ABS_Y=y1,ABS_RX=x2,ABS_RY=y2,ABS_Z=lt,ABS_RZ=rt \
	--ui-axismap X1=KEY_A:KEY_D,Y1=KEY_S:KEY_W,X2=KEY_A:KEY_D,Y2=KEY_UP:KEY_DOWN \
	--evdev-keymap BTN_SOUTH=a,BTN_EAST=b,BTN_NORTH=x,BTN_WEST=y,BTN_TL=lb,BTN_TR=rb,BTN_THUMBL=tl,BTN_THUMBR=tr,BTN_MODE=guide,BTN_SELECT=back,BTN_START=start,BTN_TRIGGER_HAPPY3=du,BTN_TRIGGER_HAPPY4=dd,BTN_TRIGGER_HAPPY1=dl,BTN_TRIGGER_HAPPY2=dr \
	--evdev-absmap ABS_HAT0X=dpad_x,ABS_HAT0Y=dpad_y \
	--ui-buttonmap du=KEY_W,dd=KEY_S,dl=KEY_LEFT,dr=KEY_RIGHT,a=KEY_LEFTCTRL,b=KEY_SPACE,y=KEY_Y,lb=KEY_A,rb=KEY_D,start=KEY_ENTER,x=KEY_ESC \
&

"/opt/retropie/supplementary/runcommand/runcommand.sh" 0 _PORT_ "bstone_ps" ""
sudo killall > /dev/null 2>&1 xboxdrv
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv --daemon --detach --dbus disabled --detach-kernel-driver --id 0 --led 2 --deadzone 4000 --silent --trigger-as-button --next-controller --id 1 --led 3 --deadzone 4000 --silent --trigger-as-button

Sincerely

tpo1990

@tomybyte That would probably work, but i think it is better to have a specific config file to include all your xboxdrv configurations for the ports or emulators that you have installed on your RetroPie system. If I update the scriptmodule for Bstone, it may just replace your Blake Stone.sh file in your Ports folder. In this way you will probably need to manually keep a backup of your changes.

ExarKunIv

@tpo1990
letting you know that something is up with blake stone.
i cant get it to load anymore on both my pi3 running 4.5, and my pi4 running 4.6

here is the error

[VID] Applying texture upscale.
/opt/retropie/supplementary/runcommand/runcommand.sh: line 1255:  1832 Bus error               /opt/retropie/ports/bstone/bstone --data_dir /home/pi/RetroPie/roms/ports/bstone/aog

here is the whole list

Parameters: 
Executing: SDL_VIDEO_KMSDRM_CRTCID=49 SDL_VIDEO_KMSDRM_MODEID=39 /opt/retropie/ports/bstone/bstone --data_dir /home/pi/RetroPie/roms/ports/bstone/aog
BStone v1.2.6
==========

Looking for game content.
Found "Blake Stone: Aliens Of Gold (shareware)" v3.0.
Content source: custom dir

Data path: "/home/pi/RetroPie/roms/ports/bstone/aog/"
Mod path: ""
Profile path: "/home/pi/.local/share/bibendovsky/bstone/"

[SND] Initializing audio
[SND] ------------------
[SND] Channel count: 2
[SND] Sample rate: 44100 Hz
[SND] Mix size: 40 ms
[SND] Effects volume: 10 / 20
[SND] Music volume: 5 / 20
[SND] OPL3 type: DosBox DBOPL
[SND] Resampling interpolation: Linear
[SND] Resampling low-pass filter: On

[VID] Initializing hardware accelerated video system.
[VID] Initializing task manager.
[VID] Creating renderer manager.
[VID] Getting display mode.

[VID] --------------------
[VID] Common configuration
[VID] --------------------
[VID] Renderer: auto-detect
[VID] Is windowed: true
[VID] Window positioned: false
[VID] Windowed x: 0
[VID] Windowed y: 0
[VID] Windowed width: 640
[VID] Windowed height: 480
[VID] UI stretched: false
[VID] Widescreen: true
[VID] 2D texture filter: nearest
[VID] 3D texture image filter: nearest
[VID] 3D texture mipmap filter: nearest
[VID] Texture anisotropy: 1
[VID] Texture upscale filter: none
[VID] Texture upscale xBRZ factor: 0
[VID] Anti-aliasing kind: none
[VID] Anti-aliasing value: 1
[VID] --------------------

[VID] Initializing 3D renderer.
[VID] Trying to initialize "OpenGL 3.2 core".
ERROR: [VID] [REN_3D_GL_UTL_MK_CTX_INIT] Failed.
[VID] Trying to initialize "OpenGL 2.0".

[VID] Device features
[VID] ===============
[VID] V-Sync: true
[VID] V-Sync requires restart: false
[VID] Texture max dimension: 4096
[VID] Viewport max width: 4096
[VID] Viewport max height: 4096
[VID] Anisotropy: false
[VID] Anisotropy max degree: 1
[VID] Non-power-of-two textures: true
[VID] Mipmap auto-generation: true
[VID] Samplers: true
[VID] MSAA: true
[VID] MSAA (render-to-window): false
[VID] MSAA requires restart: false
[VID] MSAA max degree: 4
[VID] Vertex input max locations: 16

[VID] Initializing shader program.
[VID] Initializing shader variables.

[VID] Creating texture manager.

[VID] Initializing 2D resources.
[VID] Creating UI index buffer.
[VID] Creating UI vertex buffer.
[VID] Creating UI vertex input.
[VID] Creating 2D filler index buffer.
[VID] Creating 2D filler vertex buffer.
[VID] Creating 2D filler vertex input.
[VID] Creating UI texture.
[VID] Creating 2D 1x1 black texture.
[VID] Creating 2D 1x1 white texture.
[VID] Creating 2D 1x1 fade texture.

[VID] Initializing 3D flooring.
[VID] Creating 3D flooring index buffer.
[VID] Creating 3D flooring vertex buffer.
[VID] Creating 3D flooring vertex input.
[VID] Creating 3D flooring 1x1 solid texture.

[VID] Initializing 3D ceiling.
[VID] Creating 3D ceiling index buffer.
[VID] Creating 3D ceiling vertex buffer.
[VID] Creating 3D ceiling vertex input.

[VID] Initializing 3D fade.
[VID] Creating 3D fade index buffer.
[VID] Creating 3D fade vertex buffer.
[VID] Creating 3D fade vertex input.
[VID] Create 3D fade texture.

[VID] Initializing player's weapon.
[VID] Creating player's weapon index buffer.
[VID] Creating player's weapon vertex buffer.
[VID] Creating player's weapon vertex input.
[VID] Creating player's weapon sampler.

[VID] Initializing command buffers.
[VID] Creating common command buffer.
[VID] Creating 3D command buffer.
[VID] Creating 2D command buffer.
[VID] Initializing command buffers.

[VID] Initializing samplers.
[VID] Creating UI sampler.
[VID] Creating sprite sampler.
[VID] Creating wall side sampler.
[VID] Creating fade sampler.

[VID] Applying texture upscale.
/opt/retropie/supplementary/runcommand/runcommand.sh: line 1255:  5134 Bus error               SDL_VIDEO_KMSDRM_CRTCID=49 SDL_VIDEO_KMSDRM_MODEID=39 /opt/retropie/ports/bstone/bstone --data_dir /home/pi/RetroPie/roms/ports/bstone/aog

not sure whats going on here

ExarKunIv

@tpo1990 ok so i did find the problem. bibendovsky has now got OPENGL in his build. and it does not play nice with the Pi either the Pi3 or Pi4. i am talking with him but we just started so no answer yet. and for some reason we it will not swtich to the software mode to lunch even though it does have a auto detect.

so the only work around i have found is to build from a older version. 1.1.16 is the last version that only uses software.

once i get a better answer ill update here

RussellB

I'd like to try to recompile the 1.1.16 source code to try on the RPI4. Is there a location I can go to?

ExarKunIv

@RussellB https://github.com/bibendovsky/bstone/releases?after=v1.2.0-beta.6

1.1.16 will be a little down the page

RussellB

@ExarKuniv Thanks. Unfortunately my Linux development skills are not the same as my Windows development skills so reviewing the code I'm a bit lost. Is ther a pre-compiled binary for RPI3/4 1.1.6 somewhere available for download?

RussellB

@RussellB said in Blake Stone - BStone source port:

@ExarKuniv Thanks. Unfortunately my Linux development skills are not the same as my Windows development skills so reviewing the code I'm a bit lost. Is ther a pre-compiled binary for RPI3/4 1.1.6 somewhere available for download?

Ok, now learned how to cmake and make under Linux. :-)

RussellB

@RussellB said in Blake Stone - BStone source port:

@RussellB said in Blake Stone - BStone source port:

@ExarKuniv Thanks. Unfortunately my Linux development skills are not the same as my Windows development skills so reviewing the code I'm a bit lost. Is ther a pre-compiled binary for RPI3/4 1.1.16 somewhere available for download?

Ok, now learned how to cmake and make under Linux. :-)

Just confirming that compiling 1.1.16 and using that works on the RPI4 for Both Aliens of Gold and Planet Strike.

ExarKunIv

@RussellB nice, you are on the way on having more fun.

go here.
there is a bunch of different ports that you can install now that you know cmake and make.

i will be updating my post with how to get the latest version going. i just have been a little lazy the past week or so

tpo1990

@ExarKunIv If he has updated his port to a newer version it might break the compatibility with the Pi since the scriptmodule pulls/clones straight from his git repository. Let me see if I get the same result and if the latest version doens't work, then I will look into building a solution.

@RussellB Nice, that's how I started out with Linux and Raspberry Pi since I wanted to see what other ports could be run a single board computer such as the Pi. Just keep on learning and eventually you will get there like me. Thanks :-)

ExarKunIv

@tpo1990 the newest version still works on the pi3 just fine. but the auto select for the video drivers is broken for the Pi.

so you need to make a config file called bstone_config.txt

and have this in it

vid_renderer "software"

and you have to drop it into /home/pi/.local/share/bibendovsky/bstone

once there is will start just fine.

i know i should of updated a while ago, i just got a little lazy. sorry

RussellB

@ExarKunIv said in Blake Stone - BStone source port:

@tpo1990 the newest version still works on the pi3 just fine. but the auto select for the video drivers is broken for the Pi.

so you need to make a config file called bstone_config.txt

and have this in it
vid_renderer "software"
and you have to drop it into /home/pi/.local/share/bibendovsky/bstone

once there is will start just fine.

i know i should of updated a while ago, i just got a little lazy. sorry

Testing that out and will let you know. Whoo hoo. I already have a bstone_config.txt file that says at the top WARNING! This is auto-generated file. Still ok to modify?

I got Hurrican working nicely on the RPI4!

RussellB

Ouch... recompiled from source and broke the current version and when I reverted back to 1.1.16 it is now broken. Apogee splash screen comes up, then bus error. Debug time.

Never saw this before and it was working!

ALSA lib pcm.c:8424:(snd_pcm_recover) underrun occurred

RussellB

Got 1.2.8 working! Added "vid_renderer" line to a now empty bstone_config.txt and it works... I was able to go into settings and change it to full screen!

RussellB

FYI... 1.2.8 vs. 1.1.16 requires UPPER CASE for the game files. 1.1.16 was case in-sensitive. I can confirm both work now in 1.2.8.