Backup from 32gb card and restore to 64gb card

xNYARLx

@mitu said in Backup from 32gb card and restore to 64gb card:

Win32Disk imager

what HASH choose?
NONE
MD5
SHA1
SHA256
or program will choose automatically this when i choose card?
And what is with "Read only allocated partitions"? hook or unhook this?

mitu

@xNYARLx said in Backup from 32gb card and restore to 64gb card:

what HASH choose?
or program will choose automatically this when i choose card?

It doesn't matter, unless you want to check the hash of your .img yourself.

And what is with "Read only allocated partitions"? hook or unhook this?

I think it should be unchecked, so the whole card is backed up/restored.

xNYARLx

Ok. Now i try.
One more thing... in Win10 program see 2 partitions. One is boot and second this bigger. When i choose boot partition this program make image of both?

jamrom2

@xNYARLx

Like mitu said.... definitely use Win32Disk imager. It's a little tricky the first time you make an image, but it copies everything really well. If you have a 32 gig card, it will copy whatever size is used on the card. Then write to to a larger card and expand the card size in Raspi-Config. I've done this numerous times, over many years of doing this... it works.

Don't both look at the contents of the mini-SD in Win10 as it's confusing. The card will come up as a drive in Win10, but it's only showing what Win10 can read. The rest of the contents are unable to be read.

mitu

@xNYARLx Choose the letter correponding to the boot partition. The resulting img should be approx 32Gb and will contain both partitions - the ~~while~~ entire sdcard content.

xNYARLx

Now i think is ok, I'm not wrong?
rozm. = size, użyte = use, dost. = free
Bez tytułu.jpg

THX Guys!!!
Solution: Don't use "RUFUS"! Use Win32Disk imager! :)

mitu

Yes, it looks fine.
You might want to change the console font to something like Lat2-Terminus22x11 to show correctly the Polish locale messages - modify /etc/defaults/console-setup and add

FONT="Lat2-Terminus22x11.psf"

at the end.

xNYARLx

@mitu said in Backup from 32gb card and restore to 64gb card:

Yes, it looks fine.
You might want to change the console font to something like Lat2-Terminus22x11 to show correctly the Polish locale messages - modify /etc/defaults/console-setup and add
FONT="Lat2-Terminus22x11.psf"

ohhh nice thx :)
but i have one more problem.
I run game on NEOGEO or another systems, config it, save config and when i exit and play again my config not saved, when i run another game my config too not saved (global config).

mitu

@xNYARLx Don't use the 'Save Configuration' menu - use a game/input override instead of that. What settings are you trying to set ?

xNYARLx

@mitu said in Backup from 32gb card and restore to 64gb card:

Don't use the 'Save Configuration' menu - use a game/input override instead of that. What settings are you trying to set ?

i want OFF all wideo filters, and set wideo/picture scallling to 16:9 and i want this like global to all games on NEOGEO, all games on SNES, etc.

mitu

@xNYARLx RetroPie doesn't come with any video filter/shader applied. By default, RetroArch is configured to use the original (core provided) resolution for the games. How did you install RetroPie ?

xNYARLx

@mitu From image, from this site. When i go to config, when my game is running i have in options Filters switch to ON and resolution 4:3 (in RetroArch).

mitu

@xNYARLx Can you show a screenshot of the settings ?

xNYARLx

@mitu yes, wait a moment please :)

xNYARLx

Bez tytułu.jpg
And i save, off game and when run game again my config not saved, and for another game not saved too.

mitu

@xNYARLx This looks like the Shader settings in RetroArch's Ozone menu . There is no shader configured by default in RetroPie and the RetroArch's menu is configured with RGUI (not Ozone). So you're either not using the RetroPie image or you changed those settings yourself - which one is it ?

xNYARLx

@mitu i change theme myself to ozone but i still dont can save settings :( and change this what i say. And i do this what u say, but dont work... with font.

mitu

This should work:

 CONFIGURATION FILE FOR SETUPCON

# Consult the console-setup(5) manual page.

ACTIVE_CONSOLES="/dev/tty[1-6]"

CHARMAP="UTF-8"

CODESET="guess"
FONTFACE="Lat2-Terminus"
FONTSIZE="22x11"

VIDEOMODE=

# The following is an example how to use a braille font
# FONT='lat9w-08.psf.gz brl-8x8.psf'

Since this is a system file, you need to use the root account to edit it - from the console, you can run

sudo nano /etc/default/console-tools

and do your edits.

xNYARLx

@mitu Don't work. Still don't have polish letters. (yes i edit this in this way, only foto i make from computer from wordpad)

mitu

Can't why it's not working, works on my system (based on Raspbian Buster).