EmulationStation Sluggish and Scraper Broken with 4.7 Release
-
@maserspark I'll look into the ES speed issue.
-
@BuZz Thank you! I've also tried giving ES more VRAM through the 'Other Settings' menu. Increasing it from 80 MB to 500 MB also had no change, though that was a bit of a Hail Mary.
Hopefully the output I provided for the scraper provides some hints on that.
-
The Scraper(s) haven't changed significantly between 4.6 and 4.7, so if it's a problem, it might be a temp issue with the scraping source (TheGamesDB).
-
@maserspark I can also confirm sluggish ES behavior with the 4.7 update on my Pi 3B (not 3B+).
-
@vt_fbcoach @maserspark I can also confirm this behavior on the Pi 3B (no +).
-
Also confirming very sluggish behavior in ES simply browsing between systems.
-
Running a Pi 2B, I also have slow framerates with ES on RetroPie 4.7 (having updated both to latest versions).
-
Also seeing low framerates in ES on a Pi 3B+ after upgrading a nearly-fresh 4.6 image to 4.7.
Also, every time I start a game it prints the message "VolumeControl::init() - Failed to find mixer elements!" before the runcommand dialog comes up, sometimes several times in a row. The volume is much louder now, and when I open the ES sound settings (which I hadn't touched before), the System Volume is set to 0%. If I set it higher, close the menu, and reopen it, it's set back to 0%, but it's still very loud. The Audio Card is "Default" and Audio Device is "PCM". It was working fine before the upgrade.
EDIT: After switching Audio Device to "HDMI" the volume control worked and the error stopped appearing. ES is still sluggish, so this was probably unrelated.
-
@Kapow the audio issue is well documented (there's a thread on the forum - it's due to a driver change).
I will sort ES today and roll new images. You will be able to update once this is done.
-
@BuZz Thank you!
-
Pi4b 2gb
Official PSU
Hdmi
4.7 updated via retropie setup, I ran update and choose yes to everything.I had my first emulation station crash since updating I just had to hit ok on this little square screen it took me to cli and I typed emulationstation and it reloaded fine.
But after approx 1 year of stable this was a surprise hopefully it will sort itself with updates.
My issue might be aeperate,is there a Emulation station crash log?
Crash image
Thanks
Sim -
Please do an update from RetroPie-Setup and the performance issue with EmulationStation should be sorted. Note you can either do a full update or update Retropie-Setup script, then EmulationStation.
-
@BuZz It's fixed! Thanks so much!
Unfortunately, the scraper is still broken. TheGamesDB hasn't reported anything wrong on their forum, and the error of
TheGamesDBJSONRequest - Response had no include boxart data.
leads me to believe it might be ES. -
@maserspark said in EmulationStation Sluggish and Scraper Broken with 4.7 Release:
Unfortunately, the scraper is still broken. TheGamesDB hasn't reported anything wrong on their forum, and the error of TheGamesDBJSONRequest - Response had no include boxart data.leads me to believe it might be ES.
If no games are scraped, then you may be over your monthly request quota.
-
@mitu This issue concerns about three games I added to my collection most recently. The rest of my games are scraped and have been so for years. The new games are:
- EarthBound (SNES)
- Phantasy Star IV (Genesis/Mega Drive)
- Fushigi no Umi no Nadia (Genesis/Mega Drive, Japan-only)
All three scraped fine in 4.6. I didn't save my changes before updating to 4.7, so I have to rescrape them.
-
@maserspark Yes, you're right - there's a bug in EmulationStation's scraper. We'll have to fix it.
-
A fix from @mitu has been applied to the scraper and new ES binaries are available again (v2.9.6rp)
-
-
@buzz My scraper is still not working with the v2.9.6rp update.
-
@phil_chambers What scraping source are you using ? Can you give an example of game/rom that's not working ?
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.