Add Vulkan Support to RetroPie for Pi 4?

mitu

@myzar You forgot to include the drivers for the RPI GPU, your Vulkan implementation is software only:

WARNING: lavapipe is not a conformant vulkan implementation, testing use only.
[INFO] [Vulkan]: Found GPU at index 0: llvmpipe (LLVM 7.0.1, 128 bits)
[INFO] [Vulkan]: Found GPU at index 1: V3D 4.2

bluestang

@myzar build the v3dv driver with following:

meson --prefix /usr -Dplatforms=x11 -Dvulkan-drivers=broadcom -Ddri-drivers= -Dgallium-drivers=kmsro,v3d,vc4 -Dbuildtype=release build
ninja -C build -j4
sudo ninja -C build install

There is a patch in the works to get the necessary extensions working to make lr-flycast work without changing the current source.

I will update this thread when it’s merged.

myzar

@bluestang wait do you need x running or xinit ? it works for me if i start retroarch from x

https://pastebin.com/W14Ss6xQ

it doesn't from framebuffer , i seem to understand that it should now using mesa master.

I've tried my two favorite games doa2 and soul calibur , no gfx glitches but both run alot slower for sure

my mesa build options https://pastebin.com/0aM0Dwvf

bluestang

@myzar said in Add Vulkan Support to RetroPie for Pi 4?:

@bluestang wait do you need x running or xinit ? it works for me if i start retroarch from x

https://pastebin.com/W14Ss6xQ

it doesn't from framebuffer , i seem to understand that it should now using mesa master.

I've tried my two favorite games doa2 and soul calibur , no gfx glitches but both run alot slower for sure

my mesa build options https://pastebin.com/0aM0Dwvfs far

Yes build from Mesa “master” - https://gitlab.freedesktop.org/mesa/mesa

It can be run from X11 or without. My tests have been without X11 thus far.

I’m not sure what your build settings are but your build is using the software driver llvmpipe so something is not right. The Vulkan driver has quite a few dependencies prior to building and install.

You need satisfy those dependencies and relook at your build settings.

myzar

@bluestang sorry for having wasted your time , i had some leftover of an old vulkan pkg and it was using that not the new one, purged and removed it and wow flycast is indeed faster , i'm testing daytona and i can see the difference

BuZz

@myzar are you comparing performance against the older packaged mesa driver? There are performance improvements with GLES in the latest mesa drivers so you should check with that also.

myzar

@buzz i'm switching live between the gles and vulkan driver with the fps counter enabled , in daytona is 6/7 fps higher and never dips below 30fps like the gles does, overall is a better experience. Yeah the gles driver is faster than it used to be for sure, daytona used to run like crap. Now it's okish with the gles driver and verygood with vulkan

BuZz

@myzar sounds good.

bluestang

@myzar I'm glad you got it sorted. As development progresses, things should get better under Vulkan for the Pi 4.

myzar

@bluestang yeah i'm impressed that it works with flycast , it's an early not optimized driver , the future looks bright , i wonder if we can get ppsspp to work too with the same speedup

rubencg

@bluestang do you think the dolphin emulator can be compiled in the near future to run the Vulkan driver on the Pi 4 or will depend on the dolphin developers to make it happen?

bluestang

@rubencg said in Add Vulkan Support to RetroPie for Pi 4?:

@bluestang do you think the dolphin emulator can be compiled in the near future to run the Vulkan driver on the Pi 4 or will depend on the dolphin developers to make it happen?

Sorry for the delayed reply, but dolphin has to be compiled on 64-bit AFAIK.

The libretro one fails for me, and standalone worked but it was slow.

The Vulkan driver will help with some emulators but not all. The truth of the matter is that the limitation is in the hardware and the software can only do so much to overcome that.

sergioad

Friends how is Flycast doing with Vulkan? My Christmas present is a pi 4 with aluminum case to run Dreamcast games so I am anxious to get my hands into it and play right away

bluestang

@sergioad said in Add Vulkan Support to RetroPie for Pi 4?:

Friends how is Flycast doing with Vulkan? My Christmas present is a pi 4 with aluminum case to run Dreamcast games so I am anxious to get my hands into it and play right away

Flycast runs with the current RPi4 driver but it does have some quirks. There have been performance gains seen by those that have tested it out.

The Vulkan code in Libretro Flycast needs some chgs, because it mixes Vulkan 1.0 and 1.1 features but doesn’t do proper checks to sort it out, but rather makes assumptions based on extensions used in both versions of the Vulkan API. It doesn’t account for the RPi4 v3dv state where it is 1.0 conformant but also has 1.1 features but is not 1.1 conformant...yet. Other devices would be in the same boat too if their use case was the same.

For FWIW, upstream Flycast integrated the proper checks, which is checking the driver’s instance version vs extension checks. I’ve been working on this in my spare time to mirror what is being done in upstream but I don’t have any timeline as to when I will submit PR(s). The Vulkan backend was completely revamped in upstream, and it is not an easy backport for me since I’m also learning the Vulkan API too.

sergioad

@bluestang Ok, thank you very much

bluestang

@sergioad
My PR was merged into lf-flycast. It just implements the proper way of checking the gpu’s supported Vulkan API. IMO the Vulkan backend needs more chgs but this PR will get it working if you have Vulkan installed for your RPi4.

sergioad

@bluestang incredible, please let me know when it gets implemented, I can not wait for it to get implemented, I love my Dreamcast fighting games so having Vulkan support is a must, specially for MvC2

I am also looking towards LR PPSSPP Vulkan support specially for a better Guilty Gear XX Accent Core Plus experience (it is not that good on the pi not even in the standalone PPSSPP) but my priority is Dreamcast and specially LR Flycast

bluestang

@sergioad said in Add Vulkan Support to RetroPie for Pi 4?:

@bluestang incredible, please let me know when it gets implemented, I can not wait for it to get implemented, I love my Dreamcast fighting games so having Vulkan support is a must, specially for MvC2

I am also looking towards LR PPSSPP Vulkan support specially for a better Guilty Gear XX Accent Core Plus experience (it is not that good on the pi not even in the standalone PPSSPP) but my priority is Dreamcast and specially LR Flycast

It already is, you just need to build lr-flycast with "HAVE_VULKAN=1" as well as the other build flags that are in lr-flycast.sh.

lr-ppsspp works as well with code modifications as well. However, performance is not good, I would stick with GLES until Igali can make improvements to the Vulkan code and implement more features.

sergioad

@bluestang ok, thank you very much, I will wait until then for both to get the improvements come

bluestang

@BuZz If and whenever you integrate your MESA script into RetroPie you may want to patch the debian rules to build the packages with buildtype=release.

With the default settingbuildtype=plain I did notice worse performance overall.