Setting up Half-Life through RetroPie (A Guide)

Codafire

@quicksilver im having problems, i make it works, all ok but gamepad only moves, i cant jump, or shoot and if i try to configure in main menu, game exits.

quicksilver

@soulrider911 see step three in my original post. I cover how to turn off the console notifications. I believe the fps counter option is turned off in the config.cfg in the valve folder.

@Codafire try using the binary that I compiled in my original post. It is more recent and less buggy than the one included with the script.

Codafire

@quicksilver can you send me a link? Thanks!!!

quicksilver

@codafire said in Setting up Half-Life through RetroPie (A Guide):

@quicksilver can you send me a link? Thanks!!!

https://mega.nz/folder/xBpAgYYb#arEdY1Y2DVere_gGRqeFjw

Johan_Liebert511

I always get the message "permission denied" when I want to place the "valve" folder inside

quicksilver

@johan_liebert511 said in Setting up Half-Life through RetroPie (A Guide):

I always get the message "permission denied" when I want to place the "valve" folder inside

Sounds like a permissions or ownership issue. Check to make sure the half-life folder is owned by user pi and has proper permissions.

Johan_Liebert511

@quicksilver
If you mean I didnt log in properly, I did it as pi user. But the files say in properties that they are from "root [0]". I also cant change them because of "permission denied"

Rafael

Hi,

I'm having difficulty in step 3:

If you wish to use a controller to play this game edit the file /opt/retropie/ports/xash3d/Xash3D.sh and add -sdl_joy_old_api to the end of the line. You can also remove -console from that line if you don't want the constant console messages on screen.

I can't find ports/xash3d, I only see ports/Half-Life. For some reason Xash3D.sh is inside ports.
I tried to edit Xash3D.sh by adding -sdl_joy_old_api. It looked like this:

#!/bin/bash
"/opt/retropie/supplementary/runcommand/runcommand.sh" 0 PORT "Xash3D" "" -sdl_joy_old_api

But it did not work, the control still does not respond.

Sorry for bad English, I'm using google translator =)

quicksilver

@rafael you're editing the wrong file. Make sure you're not editing the .sh file in the roms directory.

Rafael

@quicksilver thanks so much, I was looking in the wrong directory. It's working fine now.

Johan_Liebert511

@quicksilver I managed to run the game but the first 3 options of the game (New Game, Hazard Course and Load Game) can`t be used. I cant start a new game.

quicksilver

@johan_liebert511 make sure you are using the steam version of the game otherwise you'll have issues. I have heard you can use a cd copy of the game but you'll need to patch it to a newer version in order for it to work properly with xash3d. You'll need to consult the xash3d documentation for further details as I can't remember off the top of my head which patch version is the minimum requirement.

plimbs

@quicksilver Dude, this is awesome info from you! Works perfect on my pi 4 with mouse and keyboard.

On my 3b, I can seemingly compile the new FWGS version, but I get errors trying to use it. The game is very playable with original install script. Neither one recognizes my bluetooth controllers at all so I cannot play with a controller.

Has anyone managed to compile FWGS and run successfully on the 3b?

plimbs

This is what I get :

pi@retropie3:~ $ cat /dev/shm/runcommand.log
Parameters:
Executing: /opt/retropie/ports/xash3d/Xash3D.sh
[15:39:58] Console initialized.
[15:39:58] IN_TouchInit()
[15:39:58] execing video.cfg
[15:39:58] Found renderer gl: OpenGL
[15:39:58] Found renderer soft: Software
[15:39:58] Loading renderer: gl -> libref_gl.so
[15:39:58] execing opengl.cfg
[15:39:58] Trying safe opengl mode 0
[15:39:58] bpp 32
[15:39:58] Sys_Warn: Error: Can't initialize libref_gl.so renderer!

[15:39:58] Loading renderer: soft -> libref_soft.so
[15:39:58] r_fullbright is cheat protected.
[15:39:58] r_lightmap is cheat protected.
[15:39:58] Sys_Warn: invalid mode, engine will run in 640x480
[15:39:58] Sys_Warn: could not revert to safe mode!
[15:39:58] failed to initialize software blitter, fallback to glblit
[15:39:58] Sys_Warn: Error: Can't initialize libref_soft.so renderer!

mitu

@plimbs said in Setting up Half-Life through RetroPie (A Guide):

[15:39:58] Found renderer gl: OpenGL

The Pi3 doesn't have OpenGL support with the default drivers - only OpenGL ES.

plimbs

@mitu Yes, you are right. I knew that as well. But it also fails to fall back to the software renderer, which runs very well on the Pi 3 with the older code base. Wondering if anyone else got past this.

quicksilver

@plimbs I do have xash3d running on my pi zero so it should work on a pi 3 if you compile it correctly. Unless they no longer support OpenGLES or something.

Edit: xash3d github states it supports gles so I'm not sure what the issue is.

PittStone

Hello, i need help with xash3d-fwgs Controller Setup. My right Analog Controlls for look up and left, right not working. If i go to controller setups the right Analogs not working. I use Logitech Wireless Controller. Maybe its an dinput problem? And xash3d works only with xinput?

plimbs

@quicksilver So that must be the question... Am I compiling correctly? I get no errors that I can see during the build. It completes successfully.

ExarKunIv

@plimbs it seems that someone will need to go on github and ask the devs for xash3d about it.

thats what i did to get it to compile again with the script from zerojay.
now i have a pi4 and i have not tested it yet. so im not much help on this

and i used the old way to get it working on my Pi3, and that way uses the old version from FWGS