Retroarch input setting problem
-
Hello everyone, first sorry for my english is not my native language..
I have a Raspberry pi4 with obviously retropie installed, I finished today to build my cabinet and I wanted to set all the right buttons for each emulator.
I have a 8 buttons + start and select configuration for two players.
In N64 emulator i went in the Retroarch quick menu and i noticed that in port 1 controls B button and Y button are both button 3, same A and X both button 1... (see photo attached)
Port 2 controls instead, are set properly with B = 2, Y = 3 , A = 0, X = 1...
Anyone can please help me?
I hope i wrote in an understandable way.
Thanks for help.
-
@gabbo999 said in Retroarch input setting problem:
I have a Raspberry pi4 with obviously retropie installed, I finished today to build my cabinet and I wanted to set all the right buttons for each emulator.
Please add the complete info, as requested in https://retropie.org.uk/forum/topic/3/read-this-first.
In N64 emulator i went in the Retroarch quick menu and i noticed that in port 1 controls B button and Y button are both button 3, same A and X both button 1... (see photo attached)
Actually, the B/Y buttons are not mapped at all - the right side (which shows the emulated system's mapping) is empty. How did you configure the gamepad ?
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.