lr-duckstation - Experimental new PlayStation 1 emulator

dankcushions

@mrpacman17 said in lr-duckstation - Experimental new PlayStation 1 emulator:

@dankcushions Hi there.

See here: From ALL folder: https://pastebin.com/VAHGAUQk

this is a non-default config, unfortunately. i would reset it by updating retroarch, which will generate a retroarch.cfg.rp-dist default file in th same folder. delete/rename your old retroarch.cfg and then rename retroarch.cfg.rp-dist to retroarch.cfg

that said, the line i was curious about is

video_driver = "gl"

try instead with

video_driver = "glcore"

From PSX folder: https://pastebin.com/yJqykEM0

looks fine

MrPacMan17

@dankcushions Thank you, will do as advised. Many thanks again for your hard work and time.

MrPacMan17

@dankcushions I did as requested. The file is default now and I changed the videodriver to glcore as requested. But the issue persists, see Runcommand log: https://pastebin.com/YcmcpvLM

mitu

@mrpacman17 glcore is not supported on a Pi4. Use gl as the video driver. Also, RetroPie doesn't support running it in a desktop session on a Pi, you should run it outside the desktop environment.

MrPacMan17

@mitu I am running Xubuntu on an HP laptop (ProBook 6550B). I did as adviced but still the same issue is at play.

mitu

@mrpacman17 said in lr-duckstation - Experimental new PlayStation 1 emulator:

ProBook 6550B

I see, even this way glcore would not work. According to HP's spec page, the GPU included doesn't support OpenGL 3.3, which is needed for glcore.

MrPacMan17

@mitu Okay, video is set back to GL. Still no luck though. I am doing something wrong but I don't know what. Sorry for my basic level of understanding here.

mitu

@mrpacman17 Try to force the Software renderer in Duckstation by modifying retroarch-core-options.cfg and setting

duckstation_GPU.Renderer = "Software"

dankcushions

@mitu we tried that :) ~~i believe even in software mode duckstaiton needs a valid gl context. methinks this hardware is getting nothing. perhaps a linux driver issue.~~ nah it should fall back to software... https://github.com/stenzek/duckstation/pull/908 - weird.

@mrpacman17 i'm afraid i'm out of ideas. i don't have this hardware. if you know how to use gdb you could get a backtrace of the crash. you could also try the libretro and duckstation discord for advice.

MrPacMan17

@dankcushions Hi all. Well I am not a Linux specialst whatsoever. So I leave it at this. Thank you very much for your time and effort. I really appreciate it. I will run my PSX games with another emulator. Still I appreciate all your hard work. Thanks to you I can play retro games, which is totally awesome!

MrPacMan17

@dankcushions and @mitu: It WORKS!!! Just for a last effort I added the line as I did before. And now it WORKS!!! Totally happy I am. Guess all the previous steps combined with the software rendering did the trick. Woohooo!!! Thank you guys!

stoo

As well as the emulator sometimes failing to initialize OpenGL after changing resolution settings (even at low x values), I've noticed that after changing settings a few times (scaling, AA, PGXP, etc.) the emulator will become choppy and slow even when set to 1x native with all enhancements disabled. Restarting the emulator is the only way to get performance back. Not sure what's going on here.

I'll see if I can replicate it and if there are reproducible steps to cause it.

stoo

@stoo While I haven't been able to replicate the weird performance problem I was getting before, I see why OpenGL is failing intermittently.

Seemingly at random when switching AA values, a shader fails to compile. It doesn't happen every time, but maybe 50% of the time?

[libretro INFO] [LibretroHostInterface] Hardware context reset, type = 5
[INFO] [Environ]: GET_SAVE_DIRECTORY.
[libretro INFO] [LibretroHostInterface] Shader cache directory: '/home/pi/RetroPie/roms/psx//duckstation_cache/'
[libretro INFO] [GPUBackend] GPU thread stopped.
[libretro INFO] [GPU_HW_OpenGL] Max texture size: 4096x4096
[libretro INFO] [GPU_HW_OpenGL] Per-sample shading: not supported
[libretro INFO] [GPU_HW_OpenGL] Max multisamples: 4
[libretro INFO] [GPU_HW_OpenGL] Uniform buffer offset alignment: 256
[libretro WARN] [SetCapabilities] GL_EXT/OES_copy_image missing, this may affect performance.
[libretro INFO] [GPU_HW_OpenGL] Max fragment shader storage blocks: 16
[libretro INFO] [GPU_HW_OpenGL] Max shader storage buffer size: 134217728
[libretro INFO] [GPU_HW_OpenGL] Using shader storage buffers for VRAM writes.
[libretro INFO] [GPUBackend] GPU thread started.
[libretro INFO] [GPU_HW] Resolution Scale: 1 (1024x512), maximum 4
[libretro INFO] [GPU_HW] Multisampling: 4x
[libretro INFO] [GPU_HW] Dithering: Disabled
[libretro INFO] [GPU_HW] Texture Filtering: Nearest-Neighbor
[libretro INFO] [GPU_HW] Dual-source blending: Not supported
[libretro INFO] [GPU_HW] Using UV limits: NO
[libretro INFO] [GPU_HW] Depth buffer: NO
[libretro INFO] [GPU_HW] Downsampling: Disabled
[libretro INFO] [GPU_HW] Using software renderer for readbacks: YES
[INFO] [Environ]: GET_SAVE_DIRECTORY.
[libretro INFO] [LibretroHostInterface] Shader cache directory: '/home/pi/RetroPie/roms/psx//duckstation_cache/'
[libretro INFO] [GL::ShaderCache] 0 program binary formats supported by driver
[libretro WARN] [Open] Your GL driver does not support program binaries. Hopefully it has a built-in cache, otherwise startup will be slow due to compiling shaders.
[libretro INFO] [HostInterface] Loading: Compiling Shaders 81 of 0-156
[libretro ERROR] [CompileShader] Shader failed to compile:
0:105(68): error: `gl_SampleID' undeclared
0:105(63): error: cannot construct `uint' from a non-numeric data type
0:105(59): error: cannot construct `int' from a non-numeric data type
0:105(17): error: no matching function for call to `texelFetch(sampler2DMS, ivec2, error)'; candidates are:
0:105(17): error:    vec4 texelFetch(sampler1D, int, int)
0:105(17): error:    ivec4 texelFetch(isampler1D, int, int)
0:105(17): error:    uvec4 texelFetch(usampler1D, int, int)
0:105(17): error:    vec4 texelFetch(sampler2D, ivec2, int)
0:105(17): error:    ivec4 texelFetch(isampler2D, ivec2, int)
0:105(17): error:    uvec4 texelFetch(usampler2D, ivec2, int)
0:105(17): error:    vec4 texelFetch(sampler3D, ivec3, int)
0:105(17): error:    ivec4 texelFetch(isampler3D, ivec3, int)
0:105(17): error:    uvec4 texelFetch(usampler3D, ivec3, int)
0:105(17): error:    vec4 texelFetch(sampler2DRect, ivec2)
0:105(17): error:    ivec4 texelFetch(isampler2DRect, ivec2)
0:105(17): error:    uvec4 texelFetch(usampler2DRect, ivec2)
0:105(17): error:    vec4 texelFetch(sampler1DArray, ivec2, int)
0:105(17): error:    ivec4 texelFetch(isampler1DArray, ivec2, int)
0:105(17): error:    uvec4 texelFetch(usampler1DArray, ivec2, int)
0:105(17): error:    vec4 texelFetch(sampler2DArray, ivec3, int)
0:105(17): error:    ivec4 texelFetch(isampler2DArray, ivec3, int)
0:105(17): error:    uvec4 texelFetch(usampler2DArray, ivec3, int)
0:105(17): error:    vec4 texelFetch(sampler2DMS, ivec2, int)
0:105(17): error:    ivec4 texelFetch(isampler2DMS, ivec2, int)
0:105(17): error:    uvec4 texelFetch(usampler2DMS, ivec2, int)
0:105(17): error: type mismatch

[libretro ERROR] [Initialize] Failed to compile programs
[libretro ERROR] [CreateGPU] Failed to initialize OpenGL renderer, falling back to software renderer
[INFO] [Environ]: SET_MESSAGE: Failed to initialize OpenGL renderer, falling back to software renderer.
[libretro INFO] [GPUBackend] GPU thread stopped.
[libretro INFO] [GPUBackend] GPU thread started.

When this happens, it says it's falling back to Software rendering, but a black screen appears instead. The game is still running, audio is playing but no display. You can switch internal resolutions up or down to force it to initialize the OpenGL renderer again and it usually comes back.

No idea if this is a bug in duckstation, Retroarch or a GL driver bug. I'm using glcore.

dankcushions

@stoo said in lr-duckstation - Experimental new PlayStation 1 emulator:

No idea if this is a bug in duckstation, Retroarch or a GL driver bug. I'm using glcore.

why glcore? aren't you on pi4? should be gl i think

i would also remove any overclocks as they could have an affect on gl stability.

stoo

@dankcushions

Switched to "gl" driver. Problem persists.

Dropped clocks to default. Problem persists.

Simply start switching IR and AA options (e.g. enable 2xIR and 2xMSAA, switch to 3xIR, disable AA, switch to 1xIR) and it'll fail very quickly. Fallback to software renderer never works either.

I don't think I can get it to occur without changing AA settings. Simply changing IR alone doesn't seem to trigger it. It's almost certainly a software bug.

Doesn't matter if I'm using PGXP or not, or using software readbacks or not, or disabling interlacing or not.

dankcushions

@stoo yup, i can recreate also. can i ask that you please log it here ?

for others, please don't log issues on this github without confirming them here first - as with most things in emulation, this is a volunteer project and we don't want to spam the (lone) developer with work without doing some due-diligence first :)

stoo

@dankcushions Yep, that's why I waited until someone else confirmed it :)

Issue added to duckstation GH.

stoo

@nemo93 said in lr-duckstation - Experimental new PlayStation 1 emulator:

Game specific issues w/o fixes

Captain Commando (JP)
=> sprites glitches (same on PCSX-ReARMed). Seen on the very 1st boss:

Confirmed on standalone Duckstation on Win 10. Stenzek is aware of it. CD timing-related.

Gekioh (JP)
=> menu background not being cleared up when starting a game (whatever the mode). Not sure it's a bug as videos on YT show similar behavior.

Not a bug. Same on real hardware.

ISS Pro 98 (US/PAL)
=> game stuck after main menu when creating data on Memory Card (PAL). On US version it goes through but still can't see any Memory Card available in the option screen.

Confirmed on standalone Duckstation on Win 10. I can't get past that screen on either US or PAL versions. Ticket opened.

Edit: Did more testing; works in Execution Mode: Interpreter (slowest). Fails in cached interpreter and recompiler.

Edit 2: Already reported under Japanese title. Executes code out of uncached ROM, needs recompiler icache. (Compatibility Settings -> Force Recompiler ICache)

Edit 3: Recompiler ICache now forced on ISS Pro 98 by default, which fixes the problem.

fCIbX6r1uN

Anyone got negcon emulation working? It works fine with pcsx_rearmed but with duckstation there seem to be missing mappings or something (like the I button, the equivalent of X)

fCIbX6r1uN

@fcibx6r1un Updated to latest version. Ridge Racer Revolution only registers the triggers when you go into the game settings and change the negcon range to its largest (if that makes sense).