Cannot access the internet.
-
@kiro said in Cannot access the internet.:
@ignatius Unfortunately not, you need to type 'ifconfig' in the pi and check the output.... if it is not an IP address similar to your other machines (for example 192.168.0.X where only the last number changes [this are not necessarily the same numbers as in your network]) or it is not showing any IP address at all, then you have to re-configure the pi zero by using the 'sudo raspi-config' command as I mentioned in previous post.
Bleh. The battery is dead on my Pi. I'll get back to you once it's charged.
-
@ignatius :-)
-
@kiro said in Cannot access the internet.:
@ignatius Unfortunately not, you need to type 'ifconfig' in the pi and check the output.... if it is not an IP address similar to your other machines (for example 192.168.0.X where only the last number changes [this are not necessarily the same numbers as in your network]) or it is not showing any IP address at all, then you have to re-configure the pi zero by using the 'sudo raspi-config' command as I mentioned in previous post.
They are different IP addresses for both my computer and my Pi.
There are only 3 options available in Raspbi-Config to setup a network... One for a WIFI network, one for the hostname, and one for a "predictable hostname" (whatever that means). Configuring these items has no bearing on the networking of the system, since they are already set up via the "WIFI Setup" in the RetroPie "setup screen". -
@ignatius said in Cannot access the internet.:
@kiro said in Cannot access the internet.:
@ignatius Unfortunately not, you need to type 'ifconfig' in the pi and check the output.... if it is not an IP address similar to your other machines (for example 192.168.0.X where only the last number changes [this are not necessarily the same numbers as in your network]) or it is not showing any IP address at all, then you have to re-configure the pi zero by using the 'sudo raspi-config' command as I mentioned in previous post.
They are different IP addresses for both my computer and my Pi.
There are only 3 options available in Raspbi-Config to setup a network... One for a WIFI network, one for the hostname, and one for a "predictable hostname" (whatever that means). Configuring these items has no bearing on the networking of the system, since they are already set up via the "WIFI Setup" in the RetroPie "setup screen".I'm real curious why you don't just answer the question.
Of COURSE two devices have two different IP addresses... What needs to be established is whether or not your Pi is getting a valid IP from the router or if it's defaulting to another address. If you just post the output, the question can be answered. If it's getting a router assigned address then that establishes a connection and further troubleshooting will go in that direction. If the address does NOT match your local subnet mask pattern then your Pi is not connecting to the router and troubleshooting will continue in a different direction.
Please, just answer the question so people can actually help you. What is the IP address of your Pi as reported when using the command 'ifconfig' from a terminal prompt?
-
@Thorr69 said in Cannot access the internet.:
@ignatius said in Cannot access the internet.:
@kiro said in Cannot access the internet.:
@ignatius Unfortunately not, you need to type 'ifconfig' in the pi and check the output.... if it is not an IP address similar to your other machines (for example 192.168.0.X where only the last number changes [this are not necessarily the same numbers as in your network]) or it is not showing any IP address at all, then you have to re-configure the pi zero by using the 'sudo raspi-config' command as I mentioned in previous post.
They are different IP addresses for both my computer and my Pi.
There are only 3 options available in Raspbi-Config to setup a network... One for a WIFI network, one for the hostname, and one for a "predictable hostname" (whatever that means). Configuring these items has no bearing on the networking of the system, since they are already set up via the "WIFI Setup" in the RetroPie "setup screen".I'm real curious why you don't just answer the question.
Of COURSE two devices have two different IP addresses... What needs to be established is whether or not your Pi is getting a valid IP from the router or if it's defaulting to another address. If you just post the output, the question can be answered. If it's getting a router assigned address then that establishes a connection and further troubleshooting will go in that direction. If the address does NOT match your local subnet mask pattern then your Pi is not connecting to the router and troubleshooting will continue in a different direction.
Please, just answer the question so people can actually help you. What is the IP address of your Pi as reported when using the command 'ifconfig' from a terminal prompt?
My Pi's IP address is 192.168.43.255
My IP address is 192.168.250.1 -
@ignatius It's very unusual that your two devices that are supposed to be on the same network have different subnets. Is your PC using wired LAN and not WIFI?
-
@Thorr69 said in Cannot access the internet.:
@ignatius It's very unusual that your two devices that are supposed to be on the same network have different subnets. Is your PC using wired LAN and not WIFI?
I use a VPN, could that be it?
-
@ignatius You should have mentioned that in the beginning - if your VPN is mis-configured, that would explain why DNS is working but your traffic is not. Disable your VPN and see if
apt
will work. -
@mitu said in Cannot access the internet.:
@ignatius You should have mentioned that in the beginning - if your VPN is mis-configured, that would explain why DNS is working but your traffic is not. Disable your VPN and see if
apt
will work.I'm not using it on the Pi, though. Does this still apply?
-
@ignatius said in Cannot access the internet.:
@mitu said in Cannot access the internet.:
@ignatius You should have mentioned that in the beginning - if your VPN is mis-configured, that would explain why DNS is working but your traffic is not. Disable your VPN and see if
apt
will work.I'm not using it on the Pi, though. Does this still apply?
BTW, I have a new problem. I changed the default password, and it will not boot into Emulation Station now... :(
-
Changing the password shouldn't modify the auto-login feature, but you can re-configure the auto-login from
raspi-config
, see here. -
@mitu said in Cannot access the internet.:
Changing the password shouldn't modify the auto-login feature, but you can re-configure the auto-login from
raspi-config
, see here.That doesn't make sense when I can't access it with the BT keyboard. It should "remember" the connection, but doesn't., unfortunately.
I'm just going reflash the SD card. -
@ignatius Interesting. I can
apt-get update
as the normal user, but not withsudo
...
Which led me to try the following:sudo apt-get install kodi
which returned positive. But times out once it reaches the "Waiting for headers" dialog. -
@ignatius It still isn't working when I disable my VPN on my desktop computer.
-
Use a recent RetroPie release and we'd be able to help better.
At this point is not clear whether you're running a standard RetroPie 4.4 image or a 3rd party image shipped with the TinyPi. -
@mitu said in Cannot access the internet.:
Use a recent RetroPie release and we'd be able to help better.
At this point is not clear whether you're running a standard RetroPie 4.4 image or a 3rd party image shipped with the TinyI downloaded the image and wrote the image to a SD card, but i'm having trouble trying to get it to boot. So, I ordered a
SD card that is "recommended". It should be here some time next week. We'll see what happens. -
@ignatius said in Cannot access the internet.:
@mitu said in Cannot access the internet.:
Use a recent RetroPie release and we'd be able to help better.
At this point is not clear whether you're running a standard RetroPie 4.4 image or a 3rd party image shipped with the TinyI downloaded the image and wrote the image to a SD card, but i'm having trouble trying to get it to boot. So, I ordered a
SD card that is "recommended". It should be here some time next week. We'll see what happens.Ok. I got the card in the mail the other day, and flashed the .img file, it didn't work. So I tried something else.. I managed to reverse engioneer the TinyPi screen services into the new RetroPie install by copying them over. The screen is a little offset (it doesn't use the entire screen real esate), but is usuable. So, In short, i'm able to use RetroPie on the TinyPi Pro whlie being able to use the newest version of it.
-
@ignatius said in Cannot access the internet.:
@ignatius said in Cannot access the internet.:
@mitu said in Cannot access the internet.:
Use a recent RetroPie release and we'd be able to help better.
At this point is not clear whether you're running a standard RetroPie 4.4 image or a 3rd party image shipped with the TinyI downloaded the image and wrote the image to a SD card, but i'm having trouble trying to get it to boot. So, I ordered a
SD card that is "recommended". It should be here some time next week. We'll see what happens.Ok. I got the card in the mail the other day, and flashed the .img file, it didn't work. So I tried something else.. I managed to reverse engioneer the TinyPi screen services into the new RetroPie install by copying them over. The screen is a little offset (it doesn't use the entire screen real esate), but is usuable. So, In short, i'm able to use RetroPie on the TinyPi Pro whlie being able to use the newest version of it.
I'm right back to square one. I cannot ping any sites (eg, google.com), let alone connect to them. I'm using the latest Retropie version.
-
Does
ping
works from the Pi to your Wi-Fi router/AP ? Can you connect via SSH to your Pi, from your PC ? -
@mitu said in Cannot access the internet.:
Does
ping
works from the Pi to your Wi-Fi router/AP ? Can you connect via SSH to your Pi, from your PC ?No to both. :(
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.