Suggestions for ports #3 - Pi5 edition

abj

I can do the wave 1, i will add and the logs for the failed ones. I will add the results later today.

abj

i did the ''wave 1'', except supplementary and unstable scripts.

emulators

box86 - failed
duckstation -Installed
gearboy - installed
openbor-v6510 - failed
pico8 - failed
ppsspp-dev - failed
supermodel-mechafatnick - failed
suprmodel-svn - installed

libretrocores

lr-2048 - installed
lr-applewin - installed
lr-arduous - installed
lr-bk - installed
lr-blastem - failed
lr-boom3 - failed
lr-canary - failed
lr-cannonball - instaled
lr-chailove - installed
lr-citra - failed
lr-craft - installed
lr-crocods - installed
lr-daphne - installed
lr-duckstation - installed
lr-melonds - installed
lr-swanstation- installed
lr-bsnes-hd - installed
lr-easyrpg - failed
lr-fceumm-mod - installed
lr-freej2me - installed
lr-gearboy - installed
lr-gearcoleco - installed
lr-lutro - installed
lr-mame2003_midway - installed
lr-mesen-s - installed
lr-mesen-jaguar - installed
lr-minivmac - installed
lr-mu - intalled
lr-cberon -installed
lr-openlara - failed
lr-play - failed
lr-pocketcdg - installed
lr-potator - installed
lr-ppsspp-dev - installed
lr-prboom-system - installed
lr-race - installed
lr-reminiscence - installed
lr-sameboy - failed
lr-same-cdi - failed (freezing Pi-no logs).
lr-simcoupe - installed
lr-thepowdertoy - installed
lr-uzrm - installed
lr-vemulator - installed
lr-yabashanshiro - not available for pi5

ports

abuse - installed
augustus - installed
avp - ibstalled
barrage - installed
bermudasyndrome - installed
berusky - installed
bloboats - failed
boswars - installed
breaker - installed
bstone - installed
burgerspace - installed
captain_s - failed
chocolate-doom - failed
chocolate-doom-system - failed
chopper 250 - installed
corsixth - failed
crack-attack - installed
crispy-doom - failed
crispy-doom-system - failed
cytadela - installed
devilutionx - failed
dhewm3 - installed
diablo2 - installed
dink - intalled
dosbox-x failed
dunelegacy - failed
ecwolf-mod - installed
ecwolf - installed
eternity - failed
eternity-system - failed
extremetuxracer - installed
fallout1 - installed
fallout2 - installed
freeciv - installed
freedink - installed
freesynd - installed
fruity - installed
fs2open - installed
galius - installed
gnukem - installed
gtkboard - installed
gzdoom-system - installed
hcl - installed
heboris - installed
fheroes2 - installed
hexen2gl - installed
hexen2 - installed
hheretic - installed
hhexen - installed
ikemen-go - failed
ja2-stracciatella - failed
jfsw - installed
julius - installed
kraptor - installed
lbreakout2 - installed
lgeneral - installed
lmarbles - instaled
ltris - installed
manaplus - installed
meritous - failed
nblood - installed
nxengine-evo - installed
openclaw - installed
opendune - installed
openjazz - failed
openjk_ja - failed
openjk_jo - failed
openlara - installed
openmw - failed
openra - intalled
openrct2 - failed
pcexhumed - installed
piegalaxy - failed
pingus - installed
pokerth - installed
prdoom-plus - installed
prdoom-plus-system - installed
prototype - failed
pydance - failed
quakespasm - installed
rawgl - installed
rednukem - installed
relive - failed
reminiscence - installed
revolt - installed
rigelengine - installed
rocksndiamonds - installed
rott-darkwar - failed
rott-huntbgin - failed
rtcw - failed
samtfe - installed
samtse - installed
sdl-bomber - installed
seahorse - installed
septerra - installed
shiromino - installed
shockolate - failed
simutrans - installed
sm64ex - installed
sorr - failed
sorrv2 - failed
starcraft - installed
supaplex - installed
supertuxcart - installed
temptatons - installed
vanillacc - installed
vcmi - installed
warmux - installed -
wesnoth - installed
wine - failed
xash3d-fwgs - installed
zeldansq - failed

mitu

@abj said in Suggestions for ports #3 - Pi5 edition:

lr-blastem - failed

Blastem works only on x86 devices for now, it doesn't work on ARM or other CPUs.

ExarKunIv

@abj thanks for the help. i already did wave 1 before i posted this. thats why i had all the check marks on them all or no checks

let me know what else you find

ExarKunIv

@ExarKunIv

Emulators

[P] -
aethersx2 .sh -"PS2 emulator"

thanks to @retropieuser555 for working on this

abj

Many thanks for the addition of Aethersx2 !!

ExarKunIv

Ok all

i have gone through my testing for Emulators and Libretrocores

right now only aethersx2 is the only standalone Emulator working

but most Libretrocores that installed if not all are working just fine
there are 2 that i cant find the correct files for. so i cant say for sure they are no work

next i will be going onto the Ports and testing the ones that install.
again once im done with testing the ones that installed. i will go back and see what i can do about all the others

ExarKunIv

Ok

i have gone through the ports and have tested the ones that say they have installed.

all that are marked with P work.

most that say N never installed, but i don't have the file check set or not set correctly so it does not detect that it was not installed

last ill test out the Supplementary
from there i will start slowly working on seeing if i can get the ones that dont work. working

ExarKunIv

Supplementary is now been tested.

for now im going to go back and put pi4 flags on all the ones that didn't install or work. it will be less confusing for anyone just starting with Retropie-Extras.

as i go through them i will change them back for the ones that do work.

i already have a feeling that a bunch will just not work. since the repos are no longer being maintained so no work on getting them work on 64bit is being done

as always if any one wants to take a cracked at getting anything working. please do.
i appreciate any and all help

abj

I find something that maybe is useful for building lr-yabashanshiro to Pi5 : https://github.com/libretro/yabause/commit/4e65871ec0a2582fa2dbe055fccb6573dbd68d4f . i will try it the newxt days to see if it will work.

update: i have try few things but no luck so far.

retropieuser555

I've added a script for you for Ocarina of Time on your GitHub. If that works I'll make a similar one for Majora's Mask source port

ExarKunIv

@retropieuser555 Tthank You . i have been following your post about it. it was on my need to make this list for my collection.

retropieuser555

@duglor do you have the log file for when ppsspp dev fails? It works for me but I'm probably not using the same setup as yourself

ExarKunIv

@retropieuser555 i think its due to he is running 4.7.1, and not the latest version.

i have not tested it again, yet

ExarKunIv

@DTEAM Im replying here since the other topic is a year old and I don't like to naro a old topic

what bios do you have? And you have it in the ps2 bios folder?

The only one I got to work for me to work while testing was ps2-0230e-20080220.bin. have not tried looking for another.

Other then GTA. I have not tested it more.

I'll take a look again.

But unfortunately the log file doesn't tell us crap. It just says Xinit crashed.

And I can't recall is aethersx2 has a crash log itself

DTEAM

@ExarKunIv

I got this bios (the same - europe) and the US one. I also tried an europeen game and it’s the same result. On the log, the resolution seems to be fixed. My screen is 480x800. Could it be just that?

I’ll try to use a bios from another source.

ExarKunIv

@DTEAM said in Suggestions for ports #3 - Pi5 edition:

My screen is 480x800

Not too sure
I'll check my system to compare

DTEAM

@ExarKunIv

I did many tests and it doesn't work. Here's step by step what I did from the begining for aethersx2:

in config.txt --> kernel=kernel8.img
I download the last version of your script.
I installed sdl2 with those additions
I intalled your script
I got the same bios than you (ps2-0230e-20080220.bin) and ps2-0230a-20080220.bin
I got .chd and iso roms (US and EU)
I load the emulator with PCSX2.ini BIOS = " empty " and with BIOS = ps2-0230e-20080220.bin

It won't load. Always the same .log result. Did I miss a step ?

Note: I don't see aethersx2 in your first post

mitu

@DTEAM Please stop tagging me directly in all your support issues. I'm reading all forum posts when time allows me and if I have something to add to any topic, I will.

ExarKunIv

@DTEAM i have not redid my test build yet (doing other things, sorry)
the only thing i see different is that you have added vulkan
I dont. so thats the only thing that differes

since i dont know how everything really works, i dont know if this will or will not effect other systems

possible someone who knows the inerworkings of the retropie will chime in

if it might effect it, then there is nothing that can be done. aethersx2 is not compiled in anyway or form. it is just installed from a flatpack. we just got it working.