PS3 (Shenzhen Senze) controller

Paholainen

V4.0.2 from this website. Tried updating did not help (source/kernel).

BuZz

Update the RetroPie-Setup script from the main RetroPie-Setup menu. Then remove the ps3 driver from Manage Packages -> drivers > ps3 controller - then reinstall. It will build the non clone driver, but then go to configuration and you can switch to the right one.

This was fixed after 4.0.2

Paholainen

Tried it, did not work. Will try the controller on a PS3 to see if it connects at all.

Paholainen

@Paholainen said in PS3 (Shenzhen Senze) controller:

Tried it, did not work. Will try the controller on a PS3 to see if it connects at all.

Controller works on a PS3.

Paholainen

Tried to pair a official PS3 controller, that doestn´t work either. Don´t know what I´m doing wrong, as I am following the tutorials

BuZz

Don't know what to advise. You have updated RetroPie-Setup ? What version does it say ?

Did you remove the driver first ? Please can you go through the steps you took in detail.

Let's start with the official ps3 controller first.

Paholainen

The official controller. Update script, there was no PS3 drivers installed only the Xpad, so I installed PS3, removed it, installed again. When I plug in the controller nothing happens, no lights. Unplug press "PS" all flashing rapidly for a while, then nothing. Now I can not remove the PS3 driver.

BuZz

What version does RetroPie-Setup say it is ?

Paholainen

Sorry forgot that :) 4.0.4

BuZz

What happens when you try to remove ? How long did you wait ?

Please can you ssh in (https://github.com/retropie/retropie-setup/wiki/ssh) and post the output from

sudo ~/RetroPie-Setup/retropie_packages.sh ps3controller remove

Paholainen

@BuZz Will do. stand by.
The screen pops up a bit in the lower end, says removing. I´ve waited for about 2 minutes. Will try waiting while I install the ssh

BuZz

I can reproduce that problem - looks like the service doesn't like stopping sometimes. I'm looking into it. If you reboot can you remove it ?

Paholainen

@BuZz Yes, worked now. I will do the ssh stuff now

Paholainen

= = = = = = = = = = = = = = = = = = = = =
Removing 'ps3controller' : PS3 controller driver and pair via sixad
= = = = = = = = = = = = = = = = = = = = =

insserv: sixad: No such file or directory
dpkg: warning: ignoring request to remove sixad which isn't installed
Removed directory /opt/retropie/supplementary/ps3controller

BuZz

if you removed it - try reinstalling and when go to configure / and pair. I'm testing here. I don't have a fix for the remove freeze yet, but seems to happen only sometimes and a reboot helps. I think the initialisation scripts need redoing, but I was able to pair my ps3 controller last time I tried.

BuZz

That ssh command just removes it - which you already did :-)

Paholainen

@BuZz Reinstalled, went to pair. Plug in, no light (waited 20 sec) unplugged and pressed ps button, all lights flash and no pairing

BuZz

I will get back to you after some debugging.

BuZz

please can you reboot and ssh in and post the output of

/etc/init.d/sixad status

please use a code block to format - http://commonmark.org/help/ (three backticks above and below)

BuZz

also please remove / reboot / re-install it again , then reboot and run the above command.