Transfering files, images, splashscreens etc.

JiggaWatt

I missed where you said you have no internet! I'm a bonehead. Any chance you can get it on a network for initial setup? Sorry I don't know a USB method unless you load the files on a USB stick and transfer them directly on the Pi.

However, if you can get it on the network you'll have to determine the IP. I would use SSH to remotely administer the Pi, but the first step is determining the IP. :)

Are you able to connect to the Pi by SFTP and browse the file structure?

martinnoren

Hi!

No problem, I managed to get internet access and ran the commands you suggested. I now can access the pi from my mac using Cyberduck and see all my files :)

However! I can't transfer any files, I get error 550 saying that I can't transfer or remove files due to something about permission.

Do I need to enable access to the pi or something? It's really frustrating, my folders are right there now but I can't transfer anything haha.

Big thanks for your help.

edmaul69

@martinnoren the root user needs a password set and then you log in as root instead of pi to do certain stuff.
https://github.com/retropie/RetroPie-Setup/wiki/FAQ#why-cant-i-ssh-as-root-anymore

markyh444

Plus if you've got it on your network, you can just use the Samba shares to transfer files instead of a third-party client.

martinnoren

@edmaul69

Thanks! I tried it but it didn't work, still getting the same error, not able to transfer files using cyberduck.

@markyh444

Samba Shares?

markyh444

@martinnoren https://github.com/retropie/retropie-setup/wiki/Transferring-Roms

Halfway down the page.

martinnoren

@markyh444

Allas I'm working on mac, "if on windows" it says. So I assume it's only for windows.

So the problem stands, not able to transfer files even though I have changed root password and edited the settings from the link @edmaul69 suggested.

550 error, no permission. Cyberduck says.

obsidianspider

Can you SSH to the Pi?

I use Transmit to send my stuff over, but I can't see Cyberduck doing anything magically different even though it's free.

martinnoren

@obsidianspider

I can see all files and folder structures on the pi using cyberduck in my case. I can not write anything to it though, can't transfer for instance to the splash screen folder.

obsidianspider

@martinnoren What are the permissions on the folder?

SSH in and run this

stat -c %a splashscreens

you should see

martinnoren

So I connect to the pi from my computer, after that I run the lines you suggested on the pi?

If I have understood you correct it's not working, I do not get 755, I get cannot:stat splash screens, no such directories.

obsidianspider

How are you getting to the terminal on the Pi?

However you do that, when you log in as pi you should be able to run

ls

and you should see

RetroPie  RetroPie-Setup

If you enter

cd RetroPie

then type in

ls

you should see

BIOS  retropiemenu  roms  splashscreens

Then you should be able to run

stat -c %a splashscreens

martinnoren

Great!

I now used F4 on the pi to get into the cmd, then inserted the lines you suggested. At the end I received 777 ... whatever that means.

Whats my next step from here?

obsidianspider

@martinnoren 777 means you can do everything to that directory, read, write, etc. Weird that you're unable to copy things to it. When the Pi is connected to the network, can you SSH to it from the Terminal?

martinnoren

So as I'm not doing anything stupid, my process again.

I start up the pi, I have enabled ssh access on it, setting a new password and whatever else previous instructions from you guys has entailed.
I go to my mac, into cyberduck, input the ip and user info, connect and I see all the folders.
I try to copy a file from my desktop into splash screens, using cyberduck, I get the error.

How do I SSH from my terminal?

Again, super big thanks for your time!

obsidianspider

@martinnoren open Terminal on your Mac. then type in ssh username@ipaddress where username is your username (usually pi) and ipaddress is the ip address of your pi. You'll then be prompted for your password, enter that, and then you should be able to do everything you could do when you pressed F4 with a keyboard plugged into the pi.

martinnoren

Cool, I'm in. What can I do with this? How does this enable me to solve the problem with transferring files?

obsidianspider

@martinnoren At the very least, it means you can connect over a network.

With all of the trouble you're having, how did you initially set up RetroPie? Did you use the image on the website, or did you install on top of an existing Raspbian install? I'm just trying to figure out what's going on. You shouldn't have to install a separate FTP program or anything like that with the default image, even on a Zero.

martinnoren

I installed it using an img file from the retropie website, the file marked to be used with raspberry pi zero.

I'm not having allot of problems. The only problem, all though big, is that I seem to lack permission to transfer files using ftp.

The retropie is otherwise working like a charm, I have even tested transferring games via usb with great success. The reason I want to be able to transfer other files is "just" to make it look better, assign a custom splash screen, select a nice theme etc.

dankcushions

@martinnoren said in Transfering files, images, splashscreens etc.:

@markyh444

Allas I'm working on mac, "if on windows" it says. So I assume it's only for windows.

scroll down. samba works on mac fine. it appears in the finder as 'retropie' if you are connected to the same router.