Unable to load after Joystick image.

Listener · 24 Dec 2016, 20:17

Please can the community help me? I have just installed 4.1 i believe and tried to follow instructions. After which I rebooted my Rasbperry Pie 3B

Then i get an ascii coloured joy stick that i try and load by putting in, pie (Return Key)
raspberry, (Return Key). but i just get error messages on each lines, with the word bash.

Has anyone had this problem and what did they do?

markyh444 · 24 Dec 2016, 20:21

@Listener https://retropie.org.uk/forum/topic/3/read-this-first

Please read through this and try and supply as much info as possible with regards to your setup so we can help.

Listener · 24 Dec 2016, 20:43

Hello markyh444 and thank you for your reply.

Model: Raspberry Pie 3 (B)
Retropie 4.01
RetroPi website using SD image
2 xUSB SNES style joypads
error message: bash :pi: comand not found (after trying to log in on jostick prompt screen and also after emulators have been loaded via ethernet).

markyh444 · 24 Dec 2016, 21:29

@Listener Which image did you download and install? Was it the correct one for the Pi3 as there is also one for the Pi Zero which won't work. Could be a dodgy SD card as well as it should boot straight into Emulation Station once it's ran through some initial setup on first run. I'd advise providing the error messages you see as well here to see if someone can decipher them for you.

BuZz · 24 Dec 2016, 21:59

Sounds like a corrupt filesystem due to bad sdcard, or bad ior incorrectly written image.

meleu · 24 Dec 2016, 22:38

It seems that emulationstation isn't loading for some reason and the user is trying to enter account data in a bash prompt.

BuZz · 24 Dec 2016, 22:57

That sounds right. If it's not corruption then they may not have a rpi3 (and are running wrong image). Note that both images work on a rpi2 or 3, but only rpi1 image works on rpi1.

How many raspberries at the top left on boot?

Listener · 25 Dec 2016, 08:21

4 raspberries on boot

meleu · 25 Dec 2016, 12:27

@Listener said in Unable to load after Joystick image.:

I have just installed 4.1 i believe and tried to follow instructions.

What instructions? We need this info to help you.
In the "read-this-first" form there's an item named "Guide used". You forgot to fill it.

Listener · 27 Dec 2016, 05:48

Hello meleu and thank you for your reply.
I have reinstalled the software, which works, but now have a problem loading the roms via a USB pen drive.

The roms do not show up and no sign of the emulators.

Best wishes,

Listener