Component out to 4:3 CRT via 3.5mm jack.
-
i assume that's your 'no overscan' config? can you show your overscan config?
-
@dankcushions Sorry for the late reply, I was away for the holidays. Here is the pastebin of the config when I had my overscan activated (the only change is in the overscan top, left, right and bottom values): http://pastebin.com/3gsibiJd
-
-
@dankcushions THAT DID IT! Thanks so much for your patience.
The reason I had that set up is because I have been using RetroPie on an HD TV and did not want the black borders. I completely forgot to remove that option when I use a CRT TV.It's kind of unclear to me what the disable_overscan option truly does, since I was able to apply overscan values even when it was enable (look at the pictures I posted above). Still, whatever it does, disabling it on a CRT is the solution. Now, my games are in the same resolution as the ES menu.
Cheers!
-
I've been trying to get my Raspberry Pi3 running Retropie to output to RCA through the 3.5mm jack for some time now.
Without making any changed to the config.txt file, I would get sound no problems but no video whatsoever.
So I made the changes in the config file so the sdtv mode was 0 for NTSC (since I'm in North America) and I uncommented the line about forcing HDMI video if it just goes to composite.
That resulted in finally getting video output but it was all blurry and the picture was going crazy. There was colour however.
There was also only very faint sound and a whole lot of buzzing and hissing coming out of the speakers.
All 3 of the A/V plugs seem to be carrying some video now. The jack I'm using has been used by others for a R Pi3 via the reviews for it on Amazon. You have to use the red jack for video which I did.
What am I doing wrong? Please use simple words as I know nothing about Linux or programming or anything lol.
-
@mmmfloorpie RPi is tricky in matter of RCA and jack connection. It's fact that yellow and red are switched but there is another tricky thing. You also need to switch signal and ground on the red cable so it's totally different cable from those you can buy as standard.
You can try to buy a cable with a proper jack adapter for RPi. I bought mine and it doesn't work plugging in directly to TV but with this adapter use it works as it should (more/less).
It look like this one:
http://g02.a.alicdn.com/kf/HTB1_b01LXXXXXa1apXXq6xXFXXXk/1PC-3-5mm-Jack-to-3-RCA-Male-Plug-Adapter-for-Cable-DVD-Audio-for-Cable.jpg
You can also made some soldering youself with this instructions:
http://www.raspberrypi-spy.co.uk/wp-content/uploads/2014/07/Model-B-Plus-Audio-Video-Jack-Diagram.png
I thought also about making some script that will enable or disable overscan depending on active output so when RPi is connected via HDMI it will disable it but when you boot up with RCA it will enable overscan. Maybe you have something like this one?
I also wanted to ask you what happens when you had your Pi connected with HDMI and you shutdown system and run it once more on RCA. Mine doesn't display anything and has to be rebooted :/ is this normal? -
@Melvin.FoX Thanks for the reply. Where did you buy that adapter?
I haven't tried to boot with RCA while the HDMI was still plugged in.
-
@mmmfloorpie It's not possible to boot RPi with both HDMI and RCA but that's not the case. I have option to use both HDMI and RCA but not in the same time. When I would like to play retro way I will use CRT with RCA connection but when connecting to LCD I will use HDMI. The thing is that I would like to have it configured so when I use CRT I don't need to get to any option menu or change anything in bash. I want to make it just plug'n'play type of console.
-
@dankcushions is there a possibility to make this option enabled or disabled depending on used video output?
-
@Melvin.FoX if you buy a composite cable for an xbox 360 e slim it is 100% correct. You dont have to swap anything.
-
@mmmfloorpie This is the cable I'm using. https://www.amazon.ca/Zune-A-V-Output-Cable/dp/B000IXLHOM
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.