Attract Mode with RetroPie - Alternative to EmulationStation

Floob

@InsecureSpike said in Attract Mode with RetroPie - Alternative to EmulationStation:

just one question, do we have to use the new img to update, or and we

sudo apt-get

Yes, to be honest the easiest way would be to use the new image.

Floob

@InsecureSpike said in Attract Mode with RetroPie - Alternative to EmulationStation:

@robertybob said in Attract Mode with RetroPie - Alternative to EmulationStation:

@InsecureSpike said in Attract Mode with RetroPie - Alternative to EmulationStation:

well, there are some previews of my WiP phase-one AttractMode layout set

Hi mate, probably a really silly question but how easy is it for you to replace the images with video snaps? Or Is it like the other AM themes where it displays a video by default unless one isn't found, in which case it'll fall back to an image?

hi, since i don't have any video snaps, where should i get, the standard ones everyone uses?

There are video snaps in the downloadable image (they came from progettosnaps.com), or the SD quality ones from emumovies are great as well.

Floob

@rdb Did you expand the filesystem after you wrote the image to your card?
If so, could it be getting hung up on one rom/filename in particular - perhaps its worth scraping a smaller set then adding to it to try and find where the issue lies.
Are you on WiFi or cabled connection?

Pacolo

Will you think to add this as a module / experimental module in normal RetroPie, so everyone can install this from retropie setup script? (and not force to use a modified full RetroPie image)

Floob

@Pacolo The images built are really more a proof of concept, just to show what might be possible. There is already an experimental version of Attract Mode here that will install with X, but I'm sure it could be updated to non X.
https://github.com/zerojay/RetroPie-Extra

Maybe when there is more testing done with this Front End it may be a stable option.

zerojay

@Floob I would love to update it. I just moved and set up my net connection. It would be a massive help if you sent me your raw files.

Floob

@zerojay The AM author has now updated the compiling Wiki for non-X details:
https://github.com/mickelson/attract/wiki/Compiling-on-the-Raspberry-Pi-(Raspbian-Jessie)

So that covers pretty much all that is needed to get it up and running, my other tweaks relate to boot process, shaders and themes etc.. all of which are personal preference.

This is useful though - the script I slightly modified from shakz to reboot from one FE to another - these can be seen here:
/home/pi/.attract/scripts - the reboot one is: http://pastebin.com/raw/h8Jc5WYw

The other way round
/home/pi/RetroPie/retropiemenu/Switch To Attract Mode.sh : http://pastebin.com/raw/KMz6k8GG

You could rip out the pre-written emulator configs here:
/home/pi/.attract/scripts/emulators

They are largely in the format of: http://pastebin.com/raw/CBnW7YLZ

Just let me know if there are any specifics you need.

zerojay

Thanks, not sure when I'll be able to get to it yet but hopefully soon.

Floob

@rdb I tend to just stick with the Retroarch hotkey to exit a game (Start + Select), and not use the AM option.
If the emulator is not Retroarch based, I just configure an exit key for that emulator as normal.

You can edit the retroarch files to specify your own exit keys/buttons.

Brigane

@Floob Is it at all possible to update Attract Mode from v.02 to v0.4 without having to reinstall a new image?

Floob

@Brigane You could recompile attract mode, as thats the main change.
Then you'd need to make some small manual changes.

You can see how to compile it here:
https://github.com/mickelson/attract/wiki/Compiling-on-the-Raspberry-Pi-(Raspbian-Jessie)

Brigane

@Floob Ok so I tried your advice and recompiled attract mode, but nothing has changed and it still says V0.2.

Finhead

@Brigane said in Attract Mode with RetroPie - Alternative to EmulationStation:

@Floob Ok so I tried your advice and recompiled attract mode, but nothing has changed and it still says V0.2.

Why would it change the version number? Your just recomiling to the latest build which no longer uses X.
Now at console you can run "attract" instead of "xinit attract" which runs attract without the need for X. This allows the frontend to use the runcommand to in the executable to open all your emulators as EmulationStation does.

Brigane

@Finhead

pi@retropie:~ $ attract
Starting Attract-Mode v2.0.0 (Linux)
Config: /home/pi/.attract/attract.cfg

*** Initializing display: 'scripts'

Loaded master romlist 'scripts' in 0 ms (6 entries kept, 0 discarded)
Constructed 2 filters in 0 ms (12 comparisons)
AL lib: (WW) alc_initconfig: Failed to initialize backend "pulse"
Failed to open X11 display; make sure the DISPLAY environment variable is set correctly
Aborted

But it gives me this error?
I'm pretty sure I when through all the listed commands

Finhead

@Brigane If it's giving you that error you didn't complie it correctly. The new build will run either X or non X, did you get any errors at all compiling?

zerojay

I've updated my script on the RetroPie-Extra repo to install Attract Mode without X. Don't have anything else with it through so I'll likely be adding default configs and so on soon.

Brigane

@Finhead No errors according to my knowledge. I tried compiling correctly again and it says this instead.

Initializing display: 'MAME (Advance)'

Loaded master romlist 'MAME (Advance)' in 5 ms (176 entries kept, 0 discarded)
Constructed 2 filters in 4 ms (352 comparisons)
AL lib: (WW) alc_initconfig: Failed to initialize backend "pulse"
glGetError 0x500
glGetError 0x500
glGetError 0x500
glGetError 0x500
glGetError 0x500
Loaded layout: /opt/retropie/configs/all/attract-mode/layouts/robospin-betanew/ (layout.nut)

Finhead

@Brigane said in Attract Mode with RetroPie - Alternative to EmulationStation:

@Finhead No errors according to my knowledge. I tried compiling correctly again and it says this instead.

Initializing display: 'MAME (Advance)'

Loaded master romlist 'MAME (Advance)' in 5 ms (176 entries kept, 0 discarded)

Constructed 2 filters in 4 ms (352 comparisons)
AL lib: (WW) alc_initconfig: Failed to initialize backend "pulse"
glGetError 0x500
glGetError 0x500
glGetError 0x500
glGetError 0x500
glGetError 0x500

Loaded layout: /opt/retropie/configs/all/attract-mode/layouts/robospin-betanew/ (layout.nut)

The glGetError 0x500 is normal and does not seem to effect anything, everyone that runs the non X version gets this error when opening roms.
What is the exe and arg path you are running? It should look like this since it's using the runcommand with Advance mame.

For some reason the spacing is ignored through the forum. Space it as you normally would.

executable /opt/retropie/supplementary/runcommand/runcommand.sh
args 0 SYS mame-advmame "[romfilename]"
rompath /home/pi/RetroPie/roms/mame-advmame
romext .zip
system Arcade
info_source thegamesdb.net
import_extras /home/pi/.attract/mame-config

robertybob

Can I request that a pre-populated 'Emulator' for Sega 32x be added to the next release?

Floob

@robertybob Sure, in the meantime just create a file in here:
/home/pi/.attract/emulators/{filename.cfg}

and add this to the file
http://pastebin.com/raw/wN1nBk1W