PI 3 + PS3 Bluetooth controller freeze fix. UPDATED
-
After a dist-upgrade, do:
wget http://archive.raspberrypi.org/debian/pool/main/p/pi-bluetooth/pi-bluetooth_0.1.0_armhf.deb
and
sudo dpkg -i pi-bluetooth_0.1.0_armhf.deb
Reboot afterward. If hciconfig give you an output the bluetooth is working again.
This will downgrade the bluetooth module and allow the PS3 controller (and other BT devices) to work again. Best part is now that the kernel has been updated the freezing no longer exists. I have been using the PS3 controller all night without a freeze.
-
what way can I check what version of the bluetooth module is installed from the commandline and also how to check if the bluetooth module is seeing the controller at commandline level?
-
If you download the pi-bluetooth_0.1.0_armhf.deb and do a sudo dpkg -i pi-bluetooth_0.1.0_armhf.deb, you will get a warning that you are downgrading the file. You will then know you are running the newer version that is not working. You can allow the downgrade.
I believe you can do an hcitool dev to show all on devices if I remember correctly. Don't quote me on that though...
-
@eightbit Thanks for that info.I will have a look at that this evening.I am running RetroPie installed in OSMC and am wondering whether this is causing some kind of Bluetooth conflict between 'bluetoothctl' and 'sixpair'.
I have a bluetooth keyboard which works flawlessly with this setup and also works within RetroPie.This leads me to believe that because this Bluetooth keyboard is working in RetroPie that RetroPie is using Bluetoothctl which OSMC is using rather than enabling SIxpair?
-
I have tried the downgrade but encountered the following error:
root@osmc://# sudo apt-get install rpi-update
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package rpi-update
root@osmc://# wget http://archive.raspberrypi.org/debian/pool/main/p/pi-bluetooth/pi-bluetooth_0.1.0_armhf.deb
--2016-05-16 12:04:03-- http://archive.raspberrypi.org/debian/pool/main/p/pi-bluetooth/pi-bluetooth_0.1.0_armhf.deb
Resolving archive.raspberrypi.org (archive.raspberrypi.org)... 93.93.135.188, 93.93.128.133, 93.93.130.236, ...
Connecting to archive.raspberrypi.org (archive.raspberrypi.org)|93.93.135.188|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 3182 (3.1K) [application/x-debian-package]
Saving to: ‘pi-bluetooth_0.1.0_armhf.deb’pi-bluetooth_0.1.0_ 100%[=====================>] 3.11K --.-KB/s in 0.001s
2016-05-16 12:04:03 (2.75 MB/s) - ‘pi-bluetooth_0.1.0_armhf.deb’ saved [3182/3182]
root@osmc://# sudo dpkg -i pi-bluetooth_0.1.0_armhf.deb
Selecting previously unselected package pi-bluetooth.
(Reading database ... 51347 files and directories currently installed.)
Preparing to unpack pi-bluetooth_0.1.0_armhf.deb ...
Unpacking pi-bluetooth (0.1.0) ...
dpkg: dependency problems prevent configuration of pi-bluetooth:
pi-bluetooth depends on bluez-firmware; however:
Package bluez-firmware is not installed.dpkg: error processing package pi-bluetooth (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
pi-bluetooth
root@osmc://#It says package bluez-firmware is not installed.It must be though otherwise I wouldn't be able to use my bluetooth keyboard right?!Could this be that I am doing it as a root user under OSMC?
-
ive literary tried every step in this thread and now my controller when i press to connect to BT connects and then the system freezes up right after ...Is there a legit clean way to get this thing working without a million different steps?
-
@smoothmalik if you read the first post, you only need one step and it is to update and upgrade. It works for me so I cannot see why it wont work for others. I had already installed the package raspberrypi-sys-mods so check if you have that installed also.
-
@Rascas I started with the first post and nothing worked so I kept going down the thread to other suggestions which lead to where i am now lol fucked...im prolly just gonna do another clean install and try this for like the 3rd time...
-
@smoothmalik Besides the PS3 gamepad install, it is just 2 more commands, pretty easy ;)
-
Attempting to downgrade and I get the following:
dpkg-deb: error: 'pi-bluetooth_0.1.0_armhf.deb' is not a debian format archive
What am I suppose to do with that...
-
You didn't download it correctly I guess. But you don't need to downgrade - install raspberrypi-sys-mods
-
I did double check the download but I'll try install aspberrypi-sys-mods and see what happens. What should happen?
EDIT: you meant install raspberrypi-sys-mods correct, with the 'r' in front?
-
I confirmed my download and re-downloaded it a couple times, that didn't work. I took the deb off of another card that I had and it downgraded just fine.
I don't know what sys-mods is so I'll learn about it before trying it.
-
I did - the R got lost somewhere :-)
sudo apt-get install raspberrypi-sys-modsanswer Y if it asks about overwriting a file -
@Rascas I'm goin to do a fresh install. after emulationstation loads what steps do I absolutely need to do and in what order?
-
@smoothmalik You do only the 2 commands in the first post, after the "EDIT". Than install the PS3 commands, check the wiki if you dont know how. That is only it.
-
@Rascas
sudo apt-get update && sudo apt-get dist-upgrade
sudo apt-get install raspberrypi-sys-modsworked like a charm!!! THANKS
-
You can close this issue now...
I have updated the Bluetooth page on the wiki: https://github.com/RetroPie/RetroPie-Setup/wiki/Setting-up-a-Bluetooth-controller
-
After applying all the aforementioned updates and even some recipes combining a mix of them, I still get freezes on psx games as soon as i disconnect the usb cable and go all the way wireless. The rest of the setup seem to work fine. :/
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.