Attract Mode with RetroPie - Alternative to EmulationStation
-
@Brigane said in Attract Mode with RetroPie - Alternative to EmulationStation:
@Floob Ok so I tried your advice and recompiled attract mode, but nothing has changed and it still says V0.2.
Why would it change the version number? Your just recomiling to the latest build which no longer uses X.
Now at console you can run "attract" instead of "xinit attract" which runs attract without the need for X. This allows the frontend to use the runcommand to in the executable to open all your emulators as EmulationStation does. -
pi@retropie:~ $ attract
Starting Attract-Mode v2.0.0 (Linux)
Config: /home/pi/.attract/attract.cfg*** Initializing display: 'scripts'
- Loaded master romlist 'scripts' in 0 ms (6 entries kept, 0 discarded)
- Constructed 2 filters in 0 ms (12 comparisons)
AL lib: (WW) alc_initconfig: Failed to initialize backend "pulse"
Failed to open X11 display; make sure the DISPLAY environment variable is set correctly
Aborted
But it gives me this error?
I'm pretty sure I when through all the listed commands -
@Brigane If it's giving you that error you didn't complie it correctly. The new build will run either X or non X, did you get any errors at all compiling?
-
I've updated my script on the RetroPie-Extra repo to install Attract Mode without X. Don't have anything else with it through so I'll likely be adding default configs and so on soon.
-
@Finhead No errors according to my knowledge. I tried compiling correctly again and it says this instead.
Initializing display: 'MAME (Advance)'
- Loaded master romlist 'MAME (Advance)' in 5 ms (176 entries kept, 0 discarded)
- Constructed 2 filters in 4 ms (352 comparisons)
AL lib: (WW) alc_initconfig: Failed to initialize backend "pulse"
glGetError 0x500
glGetError 0x500
glGetError 0x500
glGetError 0x500
glGetError 0x500 - Loaded layout: /opt/retropie/configs/all/attract-mode/layouts/robospin-betanew/ (layout.nut)
-
@Brigane said in Attract Mode with RetroPie - Alternative to EmulationStation:
@Finhead No errors according to my knowledge. I tried compiling correctly again and it says this instead.
Initializing display: 'MAME (Advance)'
- Loaded master romlist 'MAME (Advance)' in 5 ms (176 entries kept, 0 discarded)
- Constructed 2 filters in 4 ms (352 comparisons)
AL lib: (WW) alc_initconfig: Failed to initialize backend "pulse"
glGetError 0x500
glGetError 0x500
glGetError 0x500
glGetError 0x500
glGetError 0x500 - Loaded layout: /opt/retropie/configs/all/attract-mode/layouts/robospin-betanew/ (layout.nut)
The glGetError 0x500 is normal and does not seem to effect anything, everyone that runs the non X version gets this error when opening roms.
What is the exe and arg path you are running? It should look like this since it's using the runcommand with Advance mame.For some reason the spacing is ignored through the forum. Space it as you normally would.
executable /opt/retropie/supplementary/runcommand/runcommand.sh
args 0 SYS mame-advmame "[romfilename]"
rompath /home/pi/RetroPie/roms/mame-advmame
romext .zip
system Arcade
info_source thegamesdb.net
import_extras /home/pi/.attract/mame-config -
Can I request that a pre-populated 'Emulator' for Sega 32x be added to the next release?
-
@robertybob Sure, in the meantime just create a file in here:
/home/pi/.attract/emulators/{filename.cfg}and add this to the file
http://pastebin.com/raw/wN1nBk1W -
@Finhead I should let you know that the above error occurs when I try to start attract mode. So the information you want me to write under mame advance is not possible for me to write.
-
@Brigane I see, maybe you'll need to just use Floobs image and copy your roms and profiles back into the new image. I complied my own image and it went really easy with the new instructions no errors etc 15min and it was done.
-
@Floob Thanks v much!!
-
@Floob This is not to rush on you or anything. But can you say anything about when the next attract update will happen? I'm only asking because since I can't compile to the new version correctly, I might as well wait for the next image file.
Thanks for your amazing work putting this together for us. Also I always enjoy watching your youtube videos. They are much appreciated. -
@Brigane I doubt the next version will be vastly different to v0.4 - I'd try that.
-
are there any plans to add an update feature? so as re-flashing isn't required.
also, are zipped files supported on most of the libretro emu's? -
@InsecureSpike These images arent really designed in mind with a long term roadmap, they are more proof of concept.
So I probably wont add an update feature..
A lot of/all? the retroarch based emulators support compressed files - you can see the list on the Wiki or in es_systems.cfg -
@Floob does this mean there are no plans to turn this into a on going project like RetroPie, or a sister project to RetroPie?
-
@InsecureSpike said in Attract Mode with RetroPie - Alternative to EmulationStation:
@Floob does this mean there are no plans to turn this into a on going project like RetroPie, or a sister project to RetroPie?
It wouldn't be a project like RetroPie regardless it would be more like EmulationStation since it's just a frontend for RetroPie just like ES is.
-
@Finhead sorry, yeah that's what I ment, 2 flavours of RetroPie?
as i'm actually really loving AM, and i'm sure i'm not the only one who'd like or hope this could become fully supported alternative to ES,
thats unless someone can dive into updating the theming issues -
If some of you would like some music to use on your arcade machine while scrolling the game menu, this track might be a good example. I intend to use it on my own machine that's for sure.
-
Can AM be rotated for both vertical and horizontal games?
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.