What controller do you use?
-
This madcatz stick for arcade games (i replaced the ball top with a bat top) and original super famicom pads connected via gpio on my sfc case mod.
I tried to use an original pc engine controller I modded for usb for nes and pcengine, but it doesn't feel as good as the sfc pads.
-
@Darksavior Ever tried a Neo-Geo MVS controller? It looks great... but there is no way you are going to treat a controller you bought and paid for the way you treat one in an arcade after dropping 10p in the Coin Slot. No comparison. The old joke is... "Drive it like you rented it!"
-
This one? I bought the usb version a few years back and it was a waste of cash. I don't remember if it was an official product. Cheap junk. Not sure if i can mod it, but it'll take too much work. The stick clicks too loud for my tastes, and the buttons tend to stick slightly. I made my own Happ joystick case in around 2000 so I was a bit spoiled by joysticks since then. I moved to madcatz with their sanwa parts and that's my preferred choice now.
-
@Darksavior That looks like a Third Party one. Even then, I think my point stands. I'll happily snap an arcade owners' joystick... Ahem, you get me point. I am sure.
-
@AlexMurphy SNK actually made an exact model like this, I just questioned whether the usb version was official.
-
This is awful too. Nothing beats a SEGA stand up cab, Those things were designed to be punished for 12 to 14 hours a day!
-
@AlexMurphy if this pic above should be the official one made by SNK i have never seen it.
Looks like a homebrew in my eyes, made for a consolized MVS.The other picture shows a NEO GEO X-Stick which came with the NEO GEO X System. Something similar to the Mini NES, an emulator in a small case.
Those sticks were not good indeed.But there also exist "real" NeoGeo Arcade-Sticks for USB made by SNK/Playmore.
These were only sold in Japan for the PS3.
I own one (a 2+ Model, this one had an additional PS-Button) and imo they are great. -
@AlexMurphy said in What controller do you use?:
This is awful too. Nothing beats a SEGA stand up cab, Those things were designed to be punished for 12 to 14 hours a day!
That's a custom stick.
-
@Ranma I have both the wired and wireless VX2s, and for the price there's simply nothing to touch them, especially if you're emulating the PS1.
For arcade stuff I use a Mayflash F300 modded with Sanwa buttons and stick.
-
@spagbol Are the buttons and stick easy to replace? Also why did you mod it?
Systems: Raspberry Pi 0/2/3 Model B+
Os: RetroPie 4.5
Frontend: Emulationstation & Attract Mode -
@Brigane i could imagine that he wanted to replace the buttons against better ones.
Quit a lot of people do that.
But there are two religions concerning arcade-modders: sanwa or happ?
I am a happ-guy ☺ -
But there are two religions concerning arcade-modders: sanwa or happ?
What about Seimitsu? ;-)
-
@backstander got me!!! 😂😂👍
-
I'll be using the 8bitdo zero. Yes it's very small, but it's perfectly fine for this kind of project. I thought it'd compliment the pi zero case nicely.
I can't justify £25 for a bigger bluetooth controller when I can get this bluetooth one for £6
-
@jay81uk said in What controller do you use?:
I'll be using the 8bitdo zero. Yes it's very small, but it's perfectly fine for this kind of project. I thought it'd compliment the pi zero case nicely.
I can't justify £25 for a bigger bluetooth controller when I can get this bluetooth one for £6
That's why I go to pawnshops for mine. You can get xbox360, ps3, etc for about that price at a pawnshop here in Detroit.
-
@Darksavior said in What controller do you use?:
@AlexMurphy said in What controller do you use?:
This is awful too. Nothing beats a SEGA stand up cab, Those things were designed to be punished for 12 to 14 hours a day!
That's a custom stick.
Yes that is a custom made one because Neo Geo/SNK always labels their buttons even at the arcades with A, B, C and D and they always used 4 buttons at most since all of their games uses 2-4 buttons at most.
The main reason why i know this is because i grew up with Neo Geo games such as Magician Lord, Magical Drop and the Fatal Fury series (also few other sports titles like Wind Jammers and Turf Masters). -
@AlexMurphy I would also like to mention that the Sega arcade cabs did last long but not as long as the original Neo Geo arcade cabs because when i was 18 the Neo Geo machines had cigarette burnt marks all over it even on the buttons and honestly when i spoke with the owners to these arcades they said they never really had to fix the machines but the machines they had to fix often was Virtua Fighter and Virtua Cop machines because the joystick/sensors would usually jam up and i know all to well cause for the Virtua Fighter games after a month of them being in the arcades the joysticks would be forced downwards and lost its spring like action to go back to the center and also gets pretty loose so they were made to get punished but not abused while other arcade cabs like the Neo Geo and Capcom could handle abuse.
-
@Ecks Turfmasters=best Arcade Golfgame ever.
I love that one!!
(sorry for OT!) -
@Brigane The stick seems to have been built to be as easy to mod as possible ... or else them using Sanwa clones for everything was just a happy accident. I had a drawer full of buttons and a spare joystick from previous modding projects so all I had to buy was a connector cable for the stick, a few pence worth.
-
My 8bitdo FC30 pro arrived friday and after playing around over the weekend I really like it. It plays nice with my ps3 controllers after I removed the sixad drivers, paired and setup the FC30 then readded sixad. It does show with a strange name now (szny or something) but works perfect.
I use my ps3 controllers for amiga since they are setup nicely in amiberry by default and of course PSX. But I think the FC30 will take workhorse duties for most other things
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.