@meleu any change there's an image out there that already has the pi 0w patched in already ? I want to install it on a separate SD card to compare the two versions. Thank you

Solved! This is how you get Intellivision to work on 4.1 ! give @edmaul69 a thumbs up!

@obsidianspider I've connected them individually from power off direct to the pizero USB port using a single otg cable, one controller detects and the other doesn't

You mean you need a tutorial for updating or reinstalling the PowerBlock driver, right?

What you could try is to run

wget -O - https://raw.githubusercontent.com/petrockblog/PowerBlock/master/install.sh | sudo bash

from the command line to execute the auto-install routine of the PowerBlock driver (as described at https://github.com/petrockblog/PowerBlock#quick-installation). Maybe that solves your issue?

Ok, found the file and it does match what you posted. There is .BIN and .bin so I must have other problem. Will try different things and see what i come up with.

@BuZz OMG. Thanks, BuZz. It worked.. I guess this was some information that I either overlooked or just didn't come across. You just saved me from a great deal of stress.

Thank you so much, BuZz... You are awesome. :)

@ccb9951 you should delete the config, uninstall linapple and reinstall from binary. You dont have to mess with any settings in the config other than the controller (and whether you are using a mockingbird or a mouse. You can set color too If you want to change it but you can change that with f-keys. But you dont need to change any disk drive settings. That will work right out of the box.

@meleu thanks for responding, I've added my different controllers now, sorry for not doing this earlier. However I don't think this is of any importance since every controller (except for my bog standard keyboard) gives the same results.

@zenamistress Please mind the language, we're trying to keep this forum an all ages place. Also, don't resurrect old posts - this is 3 years old post, a lot of things changed since then.

@BuZz got it, thanks

I just found that a lot of others are having the issues with rom sets - https://retropie.org.uk/forum/topic/5207/some-games-load-some-don-t-nes-fceumm-core/34 - going to try lr-nestopia and potentially zip with zero compression to see if that helps.

Not sure if this is the same issue with the controller not working though.

@Mihto 3rd party / clone ps3 controller support is limited at best - i would recommend getting another controller tbh (which you have done).

No matter what I tried, I couldn't get XBOX One and XBOX One S controller working on RetroPie 4.1 (and on 3.8) running on Raspberry Pie 1 Model B.

However, when I tried the same thing on Raspberry Pie 3 Model B, it worked like charm. It worked both for XBOX One and XBOX One S controllers. But I had issues connecting XBOX One S controller via Bluetooth; which I need to research further.

With this experience of mine, I believe we can safely assume that Raspberry Pie 1 Model B is somehow incapable of pairing with XBOX One and XBOX One S controllers.

Thanks,

@matalog Alright, I think i can give it a go at the weekend.
I'll post my testings in here and let you know if it works.

@BuZz FYI I've used pi model B+

@BrunoBronosky

I just followed the MotlenGamepad method (after not being able to get the first method to work) using a new WiiU remote with a classic controller and it works perfectly.

[NEW] Device B8:AE:6E:B4:9B:A8 Nintendo RVL-CNT-01-TR
[CHG] Device B8:AE:6E:B4:9B:A8 Connected: yes

This thread saved me a lot of frustration. Thanks.

@buckoo Please do not post a support request without first reading and following the advice in https://retropie.org.uk/forum/topic/3/read-this-first (as you agreed when registering).

Bad/fake sdcard probably.

i set it up the same minus lxde and tested, didn't seem to have a problem then I added lxde and shortly after started having problems. I backed the sdcard up before installing lxde and used that and it began working again. For about an hour of testing, no issues. i used: sudo apt-get install lxde-core xserver-xorg xinit

as it was the only one i could get to load. I would like a gui on my rpi, so a working method or a substitution gui would be appreciated. I was going to test taking my old tvservice file and moving it but my linux laptop is down so i cant modify the files since they are in use. Thanks.