How to make vector arcade games look their best

caver01

@Riverstorm Yes. It's MONOCHROME. The overlay is an image designed to mimic the artwork on the inside of the cabinet as well as a painted bezel with green cellophane/gel to color the vectors, and red over the radar, but the game image itself is monochrome. You don't want to have a shadow mask on Battlezone.

Riverstorm

@caver01 said in How to make vector arcade games look their best:

You don't want to have a shadow mask on Battlezone.

That what's I wanted to verify! :) Battlezone looks sharp with the artwork overlay. Thank you for all the help in tweaking things. I think my vector games are set for now. :) I hope good vector settings and artwork make it's way into lr-mame2003. Then it will almost be a perfect all-in-one MAME emulator for retro gaming.

bifelix89

Hello everyone! :-) I have tried the tempest romset 0106 but does not work can anyone help me? Thanks!

rbaker

@bifelix89 A 0.106 romset is compatible with Advmame 1.4 only. What emulator are you using? If it is this version of mame, you don't have a 0.106 rom.

bifelix89

The romset in my possession is a .106 so it was written where I found ... but using advmame 1.4 does not work does anyone know where you can find a romset .106? Thanks :-)

edmaul69

@bifelix89 you cant ask these kinds of question here. Try google.

caver01

@bifelix89 I will add that your question is not related to this topic. You are troubleshooting ROMs, not vector game configuration. You stated you are trying to make Tempest run, but you didn't say which ROM. I can confirm that a proper .106 tempest.zip works fine in advanceMAME 1.4, so either your ROM is bad, it is the wrong version, or you are trying to use a clone (like tempest1.zip) without understanding how clones require parents etc..

UDb23

@caver01 I had some trouble with Tempest.zip too with advmame 1.4. I finally managed to get it working but a small portion of the screen at the bottom is cut off. I don't have any other "overscan" issues with other advmame roms and ES is also working correctly at 1080p.
Any clue how to fix this ?
Using retropie 3.8.1 on Pi3 and advmame vector settings as suggested in this thread.

caver01

@UDb23 what is your video resolution and your display settings in advmame exactly? I have tempest filling the screen (truly, rotated sideways because it's a vertical game). What does yours look like? Stretched? Pillar-box?

UDb23

@caver01
I checked and Tempest uses 1080x1440 resolution. Game is portrait on a 16:9 1080p TV with usual black bars on the sides. As 1440 is > 1080 the lower part of the game area is cut.
The GUI does not allow to select lower resolutions.
I wonder why advmame uses a vertical res that's bigger than the actual available.

As an example Omega Race (horizontal game) runs at 1440x1080, correctly fitting maximum vertical resolution.

RC file DIsplay settings:

display_adjust none
display_antialias yes
display_artwork_backdrop yes
display_artwork_bezel yes
display_artwork_crop no
display_artwork_overlay yes
display_aspectx 16
display_aspecty 9
display_beam 1.2
display_brightness 1
display_buffer no
display_color auto
display_expand 1
display_flicker 15
display_flipx no
display_flipy no
display_frameskip auto
display_gamma 1
display_height 1080
display_intensity 1.5
display_interlaceeffect none
display_magnify auto
display_magnifysize 1920
display_mode auto
display_pausebrightness 1
display_resize fractional
display_resizeeffect auto
display_restore yes
display_rgbeffect none
display_rol no
display_ror no
display_scanlines no
display_skipcolumns auto
display_skiplines auto
display_translucency yes
display_vsync no
display_width 1920

This is my complete current advmame 1.4 rc file.

caver01

@UDb23 We should be able to configure a working setup. I run tempest sideways, so for me it's fine--looks just like omega race. But in your setup, you really need it to run at an effective resolution of 810x1080. Try this: specify display_height 810 and display_width 1080. The thinking is that since it's normally a game that runs on a sideways turned monitor (vertical) and you have it oriented the opposite, it's using your specified height as the width and keeping the 4:3 aspect. Specifying 810 might get it to fit properly into 1080p. It's worth a shot anyway. If it works, you should be able to copy the lines, restore one version of them to their original settings and add tempest/ in front of those lines we changed and it should apply to just that game.

UDb23

@caver01 Modified rc file as suggested.
Thank you so much, now it works correctly :-)