Composite video out using monochrome, being glitchy
-
@brad2600 in the /boot/config.txt file you probably have the video set wrong for your region. If you have pal, it is probably set to ntsc. Or if you have ntsc it is probably set to pal.
-
i set sdtv_mode=0, is there anything else i need?
-
@brad2600 i dont know where you are so i dont know if you use ntsc or pal. Try setting sdtv_mode=1
-
@brad2600 also sdtv_mode=2 and sdtv_mode=3
-
oh yes, sorry, i live in canada, so its ntsc, which i believe is 0
-
@brad2600 is sdtv_aspect=1 correct?
-
@brad2600 something i just thought of, does your tv have a shared green/yellow? If so, you are on component and not composite channel. Correct channel might just be called video.
-
it is a composite only situation. i do have one of those shared green/yellow units, but i avoid using it for pretty much anything, just to keep from complicating things.
-
sdtv_mode being set to 0, 1, 2, or 3 seems to make no difference.
sdtv_aspect=1 has in fact framed it as 4:3, so thats good. its still the same black n white mess, just 4:3 now!
also worth noting, when it first boots, the test colour screen is in colour, albeit glitchy with bars down the side. once the boot sequence starts however, there is no colour.
-
also, to ensure that none of my changes have affected this, i just tried a default, no rom, freshly downloaded install. still the exact same results.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.