Please do not post a support request without first reading and following the advice in

low power warning with mausberry.

  • I had been getting the low power warning in the top of the screen so I got one of these from ebay: link along with a 3.5a charging cable which sorted the low power warning but I have just added a mausberry circuit (and a second 3.5a cable) to use as a power switch and now I am getting the low power warning again. Does anyone know anything I can do besides not using the mausberry? Besides the mausberry I also have a fan connected to pins 1 (3.3v) and pin 2 as well as 2 zero delay usb encoders (it's a lack coffee table build).

    Pi Model or other hardware: 3 model B
    Power Supply used: 5V 4A
    RetroPie Version Used : 4.3
    Built From: Pre made SD Image on RetroPie website
    USB Devices connected: USB Wireless Keyboard, 2x zero delay arcade encoders
    Controller used: zero delay arcade encoders

  • I think your fan is using to much power to quickly, I would take it off and test

  • Or get the proper raspberry pi power supply

Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.

Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.