Raspberry Pi 3 B+ released
-
@toptrumps Oh yeah, before I left for the weekend, I didn't get mine to mount on my Mac as i had my original Pi. What is the command to make this blank file right from command line?
So just an empty file called "shh" then? I wanna say I've seen this trick before.
-
@ohmycommodore Yeah here it is. I enabled it via the menu this time around, but perhaps I can try the "manual" method here as well as didn't get the result I expected:
Enable SSH
Note: Starting with RetroPie 4.2, in order to keep the default image secure, SSH is disabled by default. It can be enabled in either of the two ways listed below.
Pre-boot. From a system with an SD-card reader, access the /boot/ directory and create an empty file called ssh
In raspi-config: after booting.
sudo raspi-config -
Weird. I didn't have to do that with the Stretch image.
-
@dirthurts it has only been the default since retropie 4.2, so if you had/updated from an older version, you wouldn't have to manually enable it.
-
N64 works fine if you overclock, get the right rom/emulator, and lower the vid settings.
I'm looking forward to a faster Pi release so I can try the Higen emulator.
Not this year apparently.
-
@dimmthewitted Good to know. What tweaks and settings did you find works?
-
@dirthurts sounds like you are describing my overclocked pi3 minus the Bluetooth enhancements. :/
-
I want 1 to play with!
-
@quicksilver Well, yeah that's basically it. It's an identical CPU/GPU, it only has better heat and energy management. So basically it is on overclocked, overclocked pi 3. If you're at 3.4 ghz already, it's not a bump.
I could only squeeze 1.25 Ghz out of my old pi, so it's a decent bump for me. I'm starting over with a decent SD card today to see if I can get my games loading at a proper speed.
@dankcushions , it's actually the beta stretch image that I'm using. Couldn't get my old images to run on the 3b+.
-
well, most of the people miss out the dedicated power supply chip and better contact solder with high grade material.
earlier, people used to do mods with rpi2 and 3 via making a dedicated power control chip.
well this one will nail the overclocking records in retropie.
IHS plus a good heat sink with fan will make it the best choice for N64 emulation.
-
@dhruv-meena said in Raspberry Pi 3 B+ released:
IHS plus a good heat sink with fan will make it the best choice for N64 emulation.
Not really.
-
@dhruv-meena I just found out my mame2003plus compile crashes are related to overclocking to 1500 despite temps being in the 60s and games having no stability issues. Lowered to 1475 and it's been fine since. I doubt any stability "records" will be broken.
-
Well....guys
If you put a dedicated power management chip outside of broadcom SoC.... It will make temp go way lower already.
So they base clock was easily 1.4ghz without IHS.
The issue would be that it is little different that old pi3, so it will take some months to stabilise.
That's why raspberry pi organization said that pi3 would still be in market....just because something which work on pi3 may not run in pi3 plus..
Just wait for a dedicated stable image of retropie...
Or a new emulator with more stability
-
I notice the specs on the RaspberryPi website has an obsolescence statement saying the Model B+ will remain in production until January 2023. So I suppose it safe to assume there won't be a Pi 4 for at least 5 years.
-
@banstead not at all. the pi1 is still in production.
-
I'm kinda slow with this.
Is the Pi 3 B+ already supported or no? -
It is, yes. You can download it here.
-
@clyde said in Raspberry Pi 3 B+ released:
Does someone know if the 3B+ still comes with disabled USB boot like the 3B does? The 3B can be set to USB boot once via an OTP bit (One Time Programmable) which can be checked (not set, don't worry) by this command:
vcgencmd otp_dump | grep 17On the 3B, the output is
17:3020000aif USB boot is enabled. Though I don't know if it's the same value for the 3B+.That is the Output on my R3 B+ (Out of the Box)... and USB Boot is working fine at least with Raspbian (Stretch).
Though, I don't know why the Stick I just have written the latest RetroPi to doesn't boot (Guess I'll should try it again with the same Media I used with the Raspbian Image). -
@ashpool Thanks for your report. I'd also be interested if your boot problems are linked to that particular stick.
-
If they ever do make a Pi 4 i hope it ends up having support for more consoles like the Gamecube and PS2.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.