need help getting after glow xbox one wired controller to work on retropie

cynital

Pi Model or other hardware: Raspberry pi 3 B
Power Supply used: Normal phone charger
RetroPie Version Used 4.4 i believe
Built From: 16 GB mirco SD
USB Devices connected: AfterGlow Wired Xbox one controller, Normal Xbox controller and key bored
Controller used:Normal Xbox controller
Error messages received: xpad patch retropie.diff failed to apply and it wont let me config the controller
Log found in /dev/shm/runcommand.log ):when i try to update it
Guide used: (Mention if you followed a guide)https://retropie.org.uk/forum/topic/3200/afterglow-prismatic-wired-controller-for-xbox-one and https://github.com/paroj/xpad

mediamogul

@cynital said in need help getting after glow xbox one wired controller to work on retropie:

Error messages received: xpad patch retropie.diff failed to apply and it wont let me config the controller
Log found in /dev/shm/runcommand.log ):when i try to update it

I thought maybe you were having multiple issues, but it appears that this is already be on the radar to be examined as early as today noted here.

Power Supply used: Normal phone charger

Just a heads up; unless that power supply is rated as specifically being 5v 2.5a, you're going to run into power issues eventually.

cynital

ok but have any idea why it wont let me config?

mediamogul

@cynital

I wouldn't want to speculate outside of it being related to the driver issue until it's ironed out.

cynital

@buzz i put everything on the top of the post

BuZz

Does the controller configure ok in EmulationStation initially? Can you navigate the ES menus
?

cynital

@buzz no after i updated every thing and use my key bored to go input the controls for the controller, it tells me to press a on the controller but it wont do anything, i cant config the key binds or anything, it says its supported so idk whats going on

cynital

@BuZz ok so when starting the system when it loads, every thing says [ OK ] but it says [ failed ] to start load Kernel Modules. see 'systemctl status systemd-modules-load.services' foe details

BuZz

@cynital and what's the output of that command if you type it in?

mitu

@cynital A normal phone charger is not an appropriate power source for a Raspberry PI. Please use a proper power adapter to power up your system.

cynital

@buzz that the module failed ill take a screen shot later but do you have any idea or fix

cynital

@mitu ok whats a proper power supply?

BuZz

@mitu Ah I didn't notice that - yeah could be power related.

BuZz

@cynital https://retropie.org.uk/docs/Overclocking/#power-supply & https://www.raspberrypi.org/documentation/hardware/raspberrypi/power/README.md

cynital

@buzz is this ok? https://www.amazon.com/Black-Mini-Portable-Charger-Built/dp/B0742NFM65/ref=mp_s_a_1_6?ie=UTF8&qid=1529881809&sr=8-6&pi=AC_SX236_SY340_QL65&keywords=pocket+juice&dpPl=1&dpID=31-lL4sd5qL&ref=plSrch im going to use it to make the pi portable so i could use it for now

cynital

@buzz also if its not power related could it be something else or would you have to see the screenshot

BuZz

@cynital That may well not be suitable. I recommend getting a proper/official PSU to rule out power issues.

BuZz

@cynital I would prefer you to copy and paste the output rather than doing a screenshot. Please see the SSH section of the documentation. You can remotely connect to the RPI to get to a terminal to type the commands.

cynital

@buzz ok ill see what i could do

cynital

@buzz i found this, he had the same controller as me any other things i could do to make it work (ill try to get the error in ssh in a bit) https://retropie.org.uk/forum/topic/3200/afterglow-prismatic-wired-controller-for-xbox-one