Goodbye fbalpha, welcome fbneo
-
@thestarglider when I pull up the FPS counter in SF3 I am seeing consistent dips to 58fps (occasionally down to 55fps) causing slight [constant] stutter in the motion. I am also hearing similar audio scratchiness. So far this is only with SF3. I fresh installed Retropie not too long ago on an RPi3B+ without adding anything else. I am totally lost on why my B+ is performing worse than anyone else's.
-
@GreenHawk84 and again, since the target speed of the Emulation is 60fps, I'm somewhat skeptical that this stutter is purely down to a drop of a couple of frames a second that really no human is going to notice with their eyes. Something else is interfering with your game.
-
@thestarglider said in Goodbye fbalpha, welcome fbneo:
Post update, my FPS actually increased to a fairly solid 60fps, perhaps dropping every so often to 59.
The game actually run at 59.583393Hz, but with RA's fps counter not being perfect you'll only see an approximation.
Anyway, yeah, the pi3b+ is definitely able to run at full speed the 3 sfiii without OC nor frameskip, including sfiii2 with widescreen (for me), i don't understand what's the issue for @Darksavior @Lyle_JP @GreenHawk84, at this point i think it might be a hardware defect.
-
Hello, first of all I don't want to complain. You do great work, but is there something wrong with my setup or has someone else experienced the following?
Food Fight ran fine with FBA previously, but when I upgraded to FBNeo I lost the ability to play Food Fight. I didn't notice earlier because it's not a title I play often, but I was recently going to try to make the controls similar to Robotron 2084 only to find that the game no longer played in "Final Burn" (my arcade default). The title never played in FBA2012, FBNeoGeo, and MAME on the RPi. FBA was the only emulator that worked. Is something corrupt with my ROM? Just curious. Thanks.
-
@IanDaemon said in Goodbye fbalpha, welcome fbneo:
when I upgraded to FBNeo I lost the ability to play Food Fight
The game is working fine so i guess you are using a bad romset.
-
@IanDaemon - Food Fight (foodf) should be working in mame2003 and mame2003-plus. With mame2003-plus I think markwkidd created a "bootstrap" which basically generates the .nvram file on the fly during game launch or it hangs and looks broken. It's seamless to the user. I don't remember if mame2003 has the bootstrap code but I know you can copy the .nvram file over from m3plus to 2003 and it works fine.
There's several games that need .nvram files or they don't boot correctly so I keep clean copies with the ROMs for new setups. I've never needed to do that for FBNeo though as they have always just worked.
-
@Riverstorm said in Goodbye fbalpha, welcome fbneo:
I've never needed to do that for FBNeo though as they have always just worked.
Because on latest mame romsets (the ones FBNeo uses), the nvram is part of the romset for games that need it.
-
@barbudreadmon said in Goodbye fbalpha, welcome fbneo:
Because on latest mame romsets (the ones FBNeo uses), the nvram is part of the romset for games that need it.
@barbudreadmon - Thanks for that it makes things a lot easier! :)
-
Okay so upon replacing the generic power supply with an official Raspberry Pi power supply, it seems the game runs a lot better than before. I still think that FBA2012 is working a little better, but apparently I was using a bunk PSU.
-
@GreenHawk84 said in Goodbye fbalpha, welcome fbneo:
apparently I was using a bunk PSU
Yeah, hardware defect was the most likely suspect from the beginning, assuming you were really using default settings.
@GreenHawk84 said in Goodbye fbalpha, welcome fbneo:
I still think that FBA2012 is working a little better
Use whatever you want, as far as i'm concerned the pi3b+/FBNeo/cps3 combination is perfectly smooth on my side, and i prefer accurate emulation when available.
-
False alarm, my 3B+ still runs SF3 poorly. Everything else is fine. I have installed fbneo from source multiple times, defaulted my settings in retroarch (even though I never changed anything) and even turned off my simple overlay of side art for the game. Nothing works for fbneo (SF3), but fba2012 is pretty nice. I think I am going to give up on this for now, maybe something will improve for me later.
-
@GreenHawk84 how did you default your settings? there’s a right way, and a wrong way...
-
@dankcushions I just went into the Retroarch UI and selected the option to reset.
-
@GreenHawk84 that’s the wrong way, hence you won’t see it in any of our docs. it gives you retroarch defaults, which are very different from retropie defaults, and probably include rewind, and a bunch of other non-performing features.
right way: https://www.reddit.com/r/RetroPie/comments/7gupd2/how_do_i_reset_retroarch_settings/
but tbh, now that you used that option i don’t know what your .cfg setup will be like. you’re on your own...
-
My fbneo can't run, he will return to the selection interface, my device is Raspberry Pi 3b+, do you know how to solve it?
-
@HACHI201 open a new topic and provide the information asked in the Read-me-first topic, linked at the top of the forum.
-
@HACHI201 said in Goodbye fbalpha, welcome fbneo:
do you know how to solve it?
Imho, usual "i didn't bother reading the arcade documentation and don't know what's a romset" crap.
-
@barbudreadmon 😂👍 full ack!
-
@dankcushions if you think my .cfg is jacked, do you have a copy of a default .cfg I can just replace mine with?
-
@GreenHawk84 - Just go to your fbneo folder and rename your current retroarch.cfg file (for backup, troubleshooting or you can delete it). I like to keep it for a while by adding .bak to the original name or my initials or whatever.
Then copy the retroarch.cfg.rp-dist file (it should be located in the same folder) and rename it to retroarch.cfg. This should restore default settings for the core but keep your original settings handy for reference. It usually works best if you exit ES back to a prompt while doing it or that may cause a potential issue too.
There may still be some global settings that are potentially causing issues but the core settings are usually an easy reset. Also you could check ROM level settings if you use them.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.