Please do not post a support request without first reading and following the advice in https://retropie.org.uk/forum/topic/3/read-this-first

Phantom controller movements only on ARCADE menu



  • Pi Model or other hardware: B
    Power Supply used: Anker 2.1 amp USB
    RetroPie Version Used: 4.4
    Built From: https://github.com/RetroPie/RetroPie-Setup/releases/download/4.4/retropie-4.4-rpi2_rpi3.img.gz
    USB Devices connected: none
    Controller used: knockoff Pro Controller U
    Error messages received: none
    Log found in /dev/shm/runcommand.log (if relevant): n/a
    Guide used: n/a
    File: not sure
    Emulator: not sure
    Attachment of config files: not sure what is relevant
    How to replicate the problem: not sure

    I've setup my RetroPie and then installed many ROMs for a number of non-Arcade systems. All was good. Then I added Arcade ROMs. It seems that ONLY in the Arcade menu (and none of the other menus), I get phantom/ghost controller issues. I am using a third party Nintendo compatible Controller Pro U over Bluetooth. A couple things about the Arcade ROMs. There are over 2000 whereas the other menus have maybe 100-200 items. The Arcade ROMs have videos with them (snap and wheel folders) and the other folders do not. Any ideas as to why I get the weird issues just in this one menu? I've seen many threads about similar issues but they are all mostly 1-2+ years old without any clear solutions. Thanks!


  • Global Moderator

    Maybe because entering the Arcade folder solicits the system more - RAM/CPU - and your power source is below the recommended specs. You can try looking in the system's log (running sudo dmesg from the command line) and see if you spot any warning/errors.
    Do you get the under-voltage lightning bolt when you browse the folder ? Do the ghost inputs appear if the controller is connected via USB instead of Bluetooth ?



  • @lex3001 Please excuse the question, but are you really sure about the ghost inputs only happening in the Arcade menu? I ask because It sounds rather strange. Did you wait long enough in all of the menus to rule out mere coincidence of it happening only in the Arcade menu?

    You can test a controller for ghost inputs out of Emulation Station by pressing F4 (you'll land in Retropie's command console) and entering this command:

    jstest --event /dev/input/js0
    

    Any inputs coming from the device will be listed while the command is running. You may have to change js0 to the device name of your controller, e.g. js1, js2 etc. You can end the test by pressing ctrl+c and return to Emulation Station with the command exit.

    As for solutions for ghost inputs from bluetooth controllers, I fixed those that came from my Qumox Wii U Pro controllers by using a Mayflash Wii U Pro wireless adapter instead of the Raspberry Pi's own bluetooth to connect them. That got rid of the ghost inputs for good.



Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.

Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.