Installed retroflag superpi case and Pi is not working at all now
-
So I have spent the past 3 weeks getting my retropie all together and i was using a snes pi case and everything was working great.
Today I got a retroflag superpi case and I installed the pi with it, went to power it up and the only thing that happened was the red lig
ht on the pi its self turned on, no video or anything.So I took it out of the case and tried to turn it on and same thing, nothing working except the red light on the pi. It was working fine just before I tried the case.
I am worried it ruined my raspberry and I cant even get on to try anything. Any help would be greatly appreciated.
-
@russkova21 is the SD card seated properly? If so remove the pi from the case and try without the case. If it boots then perhaps the case is faulty.
-
try removing it from the case and remove all cables and the sd card. Connect everything back up and boot up without the case and make sure it's not a problem with the snespi power supply. Make sure the switches are in the right position, I think there's a switch for power inside the case, and another one for safe shutdown, which requires additional script to work, turn this to "off" so that you do the manual shutdown method.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.