Overclocking the Pi3b+ GPU (Results)

[robertvb83]

@Brunnis said in Overclocking the Pi3b+ GPU (Results):

24h test complete. No issues found (Quake 3 + memtester 512 + sysbench (2 threads)) at the following settings:

arm_freq=1475
core_freq=600
v3d_freq=400
sdram_freq=550
over_voltage=1
temp_soft_limit=70

i have played a little with overclocking on 3B+... I have no issues with temperature and games play well without any trouble

However, I have issues with compiling (updating from source) with an overclocked 3B+. updating mame2003-plus almost always freezes or stops with errors... Any idea about that? (I don't know my exact settings but I had this issue with many settings found around the internet, even for moderate overclocking)

Edit: I also did a sysbench stress test without issues

[mitu]

@robertvb83 said in Overclocking the Pi3b+ GPU (Results):

updating mame2003-plus almost always freezes or stops with errors..

What kind of errors ? If they're memory related error (not enough memory), then you can increase the amount of swap added during compilation to get over those issues. Do you get the same kind of errors without overclocking ?

[Brunnis]

@BuZz @hhromic To expand on the discussion regarding CPU governor and lower than expected performance: I've been watching the output of the 'top' command now, while running some SNES loads and below are some results. "Tweaked video settings" below means:

video_driver="dispmanx"
video_threaded="false"
video_max_swapchain_images=2

For the ondemand CPU governor tests above, I also ran a script that read actual CPU frequency every second. Turns out the ondemand CPU governor leads to frequent downclocking (to 600 MHz) in all test cases (whether running Super Mario World or Super Mario World 2 and whether using default or tweaked video settings). Here are the printouts:

Test 2: Governor ondemand (tweaked video settings) - SMW
Test 2: Governor ondemand (tweaked video settings) - SMW2
Test 4: Governor ondemand (default video settings) - SMW
Test 4: Governor ondemand (default video settings) - SMW2

So, to conclude, it doesn't look like the ondemand CPU scheduler handles this in an optimal way. The constant ping-ponging of the CPU frequency (even with default RetroPie settings) is hardly optimal and may lead to performance issues in some cases. For most situations, the additional frame buffering used on a default installation seems to mask the impact of the reduced CPU frequency. Removing that buffering (i.e. using video_max_swapchain_images=2) reveals the issue in an obvious way with stuttering performance in demanding situations (such as SMW2).

[dankcushions]

@Brunnis what's your 'Est. single CPU load (%)' column about? with video_threaded="false" retroarch should be entirely operating on one core. even with video_threaded="true" the threaded video tasks are very minor.

[Brunnis]

@dankcushions
That's just converting top's CPU load (which is for all four cores) to the estimated resulting single core load. So:

("Total CPU load"/25)*100 gives you the value in the "Est. single CPU load" column.

[dankcushions]

@Brunnis said in Overclocking the Pi3b+ GPU (Results):

@dankcushions
That's just converting top's CPU load (which is for all four cores) to the estimated resulting single core load. So:

("Total CPU load"/25)*100 gives you the value in the "Est. single CPU load" column.

actually top's percentage is cumulative. eg, 100% load on 4 cores would appear on top as 400%

that said, these emulators are not threaded so they won't be using the other cores, so top's total load will be - or very close to - the load on one core (some OS tasks might be working on other cores)

if you press 1 within top you get a % per core - https://unix.stackexchange.com/a/146090

[Brunnis]

@dankcushions said in Overclocking the Pi3b+ GPU (Results):

@Brunnis said in Overclocking the Pi3b+ GPU (Results):

@dankcushions
That's just converting top's CPU load (which is for all four cores) to the estimated resulting single core load. So:

("Total CPU load"/25)*100 gives you the value in the "Est. single CPU load" column.

actually top's percentage is cumulative. eg, 100% load on 4 cores would appear on top as 400%

that said, these emulators are not threaded so they won't be using the other cores, so top's total load will be - or very close to - the load on one core (some OS tasks might be working on other cores)

if you press 1 within top you get a % per core - https://unix.stackexchange.com/a/146090

The %Cpu(s) value at the top (which is what I looked at, should have just looked at RetroArch in the process list below instead) is not cumulative unless you press 1. So, unless you press 1, a full load on all four cores will show as a combined value of 100. But thanks for the tip about pressing 1. Didn't know that!

I'll see if I can update the figures with slightly more accurate ones anyway.

[Brunnis]

I just updated the chart to be a bit more clear on what it's showing.

[dankcushions]

@Brunnis yeah i couldn't quite work out why you were "estimating" them but that checks out :)

i guess i still don't see a smoking gun with the figures being given, especially when the issue is only apparent using video settings where stutter is a known risk under cpu load situations. however if it's a binary thing to your eyes where the stutter is eliminated once the performance governor is set, i guess that is all that needs to be said.

this seems like a perfect test case for my benchmarking script that i never got back to :) https://github.com/dankcushions/retropie-auto-testing/blob/master/retropie-auto-testing.sh

[Brunnis]

@dankcushions said in Overclocking the Pi3b+ GPU (Results):

i guess i still don't see a smoking gun with the figures being given, especially when the issue is only apparent using video settings where stutter is a known risk under cpu load situations. however if it's a binary thing to your eyes where the stutter is eliminated once the performance governor is set, i guess that is all that needs to be said.

Well, in this case the stuttering does not occur because the CPU isn't fast enough, but because the ondemand governor is not able to determine that the CPU should stay at max frequency. That's a pretty big difference in my eyes.

The figures I posted above show us that the ondemand governor doesn't work as we'd expect and that the resulting performance issue is simply masked by buffering with the default settings. With this testing alone, I can't say for sure that it doesn't affect some marginal games even at default settings. It's certainly possible that only video_max_swapchain_images=2 exposes it. In that case, it would of course be okay to leave the governor at the current default.

I didn't post this to press for a change of default governor (since BuZz has already said it won't happen). However, I thought the figures were interesting, since the frequency rollercoaster behavior at default settings didn't seem to be common knowledge.

[robertvb83]

@mitu said in Overclocking the Pi3b+ GPU (Results):

@robertvb83 said in Overclocking the Pi3b+ GPU (Results):

updating mame2003-plus almost always freezes or stops with errors..

What kind of errors ? If they're memory related error (not enough memory), then you can increase the amount of swap added during compilation to get over those issues. Do you get the same kind of errors without overclocking ?

I did not have any errors without overclocking!
this is where compiling ends when overclocked:

[dankcushions]

@Brunnis said in Overclocking the Pi3b+ GPU (Results):

@dankcushions said in Overclocking the Pi3b+ GPU (Results):

i guess i still don't see a smoking gun with the figures being given, especially when the issue is only apparent using video settings where stutter is a known risk under cpu load situations. however if it's a binary thing to your eyes where the stutter is eliminated once the performance governor is set, i guess that is all that needs to be said.

Well, in this case the stuttering does not occur because the CPU isn't fast enough, but because the ondemand governor is not able to determine that the CPU should stay at max frequency. That's a pretty big difference in my eyes.

The figures I posted above show us that the ondemand governor doesn't work as we'd expect and that the resulting performance issue is simply masked by buffering with the default settings.

forgive me, but i don't think they neccesarily show that. they only show that the governor has decided the CPU should be downclocked (to 600) during some tests. we know the emulators in question do not exert a constant load on the cpu (~90% usage). from the earlier information, it looks like the governor should be checking CPU load and making this decision every 0.01 of a second (sampling_rate defaults to 10000 usecs?), so given that fidelity i am now not surprised that you will see it downlocking every so often. it's probably changing the core speed 100s of times a second.

the performance issue you observe must be caused by his process, agreed, but that stutters is not specifically measured in the above data, if you get what i mean. we need an fps benchmark for that.

anyway, it seems to me like a good fix might be to increase the sampling_rate fidelity to something north of a frame. eg over 16666667 usec. that way, applications that are generally low load will still downlock, but cpu-heavy emulators will stay full speed. i don't know if that's a good idea, just my initial thought.

[dankcushions]

@robertvb83 said in Overclocking the Pi3b+ GPU (Results):

I did not have any errors without overclocking!
this is where compiling ends when overclocked:

remember that retropie compiles use 2 of the 4 cores, but emulation mostly uses 1 core, so an overclock that is stable in games can definitely be unstable in compiles.

[Brunnis]

@dankcushions said in Overclocking the Pi3b+ GPU (Results):

forgive me, but i don't think they neccesarily show that. they only show that the governor has decided the CPU should be downclocked (to 600) during some tests. we know the emulators in question do not exert a constant load on the cpu (~90% usage). from the earlier information, it looks like the governor should be checking CPU load and making this decision every 0.01 of a second (sampling_rate defaults to 10000 usecs?), so given that fidelity i am now not surprised that you will see it downlocking every so often. it's probably changing the core speed 100s of times a second.

Yes, I think I may have expressed myself a bit unclear. I agree that the governor probably just behaves according to spec. The "unexpected" part is that it affects the performance in a negative way in certain cases. Ideally, the "ondemand" governor should produce the same (or very close to the same) end result (i.e. performance) as the "performance" governor.

the performance issue you observe must be caused by his process, agreed, but that stutters is not specifically measured in the above data, if you get what i mean. we need an fps benchmark for that.

Yeah, we can definitely measure the performance delta, but what would we do with the data? Would it affect the current discussion in any significant way? For an initial discussion on whether the ondemand governor can cope with the load without affecting the result, audio-visual cues are certainly sufficient. The regression in the end result is not exactly subtle.

anyway, it seems to me like a good fix might be to increase the sampling_rate fidelity to something north of a frame. eg over 16666667 usec. that way, applications that are generally low load will still downlock, but cpu-heavy emulators will stay full speed. i don't know if that's a good idea, just my initial thought.

They write sample rate in the docs, but I guess they mean period? Increasing the sampling period wouldn't really help. The average load over the period would then often be too low to clock up at all. We'd instead need a really small sample period, so that the downclocked core spins up as fast as possible when the load increases (i.e. the next frame rendering kicks off). The current issue is probably that the default of, say, 10 ms means that once the core is clocked down and the emulator kicks off again, you're spending up to 10 ms rendering the frame at 600 MHz before the governor checks the load and decides to clock back up. Then it's too late and you won't be able to submit the frame on time.

[quicksilver]

@hhromic just found this in the official RPI documentation:

"NOTE: Setting any overclocking parameters to values other than those used by raspi-config may set a permanent bit within the SoC, making it possible to detect that your Pi has been overclocked. The specific circumstances where the overclock bit is set are if force_turbo is set to 1 and any of the over_voltage_* options are set to a value > 0. See the blog post on Turbo Mode for more information."

So force turbo or AND any amount of over voltage applied will set the warranty bit.

[dankcushions]

@Brunnis said in Overclocking the Pi3b+ GPU (Results):

@dankcushions said in Overclocking the Pi3b+ GPU (Results):

forgive me, but i don't think they neccesarily show that. they only show that the governor has decided the CPU should be downclocked (to 600) during some tests. we know the emulators in question do not exert a constant load on the cpu (~90% usage). from the earlier information, it looks like the governor should be checking CPU load and making this decision every 0.01 of a second (sampling_rate defaults to 10000 usecs?), so given that fidelity i am now not surprised that you will see it downlocking every so often. it's probably changing the core speed 100s of times a second.

Yes, I think I may have expressed myself a bit unclear. I agree that the governor probably just behaves according to spec. The "unexpected" part is that it affects the performance in a negative way in certain cases. Ideally, the "ondemand" governor should produce the same (or very close to the same) end result (i.e. performance) as the "performance" governor.

the performance issue you observe must be caused by his process, agreed, but that stutters is not specifically measured in the above data, if you get what i mean. we need an fps benchmark for that.

Yeah, we can definitely measure the performance delta, but what would we do with the data? Would it affect the current discussion in any significant way?

no, i'm just articulating what i mean when i say that the data presented is not the "smoking gun", but your personal observations of a stutter is.

i think the sampling_down_factor might be the one we would tweak:

• sampling_down_factor:

  This parameter controls the rate at which the kernel makes a decision

  on when to decrease the frequency while running at top speed. When set

  to 1 (the default) decisions to reevaluate load are made at the same

  interval regardless of current clock speed. But when set to greater

  than 1 (e.g. 100) it acts as a multiplier for the scheduling interval

  for reevaluating load when the CPU is at its top speed due to high

  load. This improves performance by reducing the overhead of load

  evaluation and helping the CPU stay at its top speed when truly busy,

  rather than shifting back and forth in speed. This tunable has no

  effect on behavior at lower speeds/lower CPU loads.

[hhromic]

@quicksilver said in Overclocking the Pi3b+ GPU (Results):

So force turbo or any amount of over voltage applied will set the warranty bit.

No, it is force_turbo=1 and over_voltage_* > 0. If you don't use force_turbo, you are fine.

The specific circumstances where the overclock bit is set are if force_turbo is set to 1 and any of the over_voltage_* options are set to a value > 0.

[quicksilver]

@hhromic Ah thank you for the clarification! I completely missed the "AND".

[hhromic]

Interesting discussions and investigations guys!
I still advocate to leave ondemand as the system default and educate users on how overclocking works and how to use the governor runcommand option, as it's the soundest/safest approach. This topic should definitively be used to update/populate the Wiki entry on the topic.

The only improvement I would consider in this subject would be to implement a per-command governor setting in runcommand, similar to how video modes are set currently. For example create a governors.cfg file alongside videomodes.cfg.

This would give the flexibility for the governor to be configured per-emulator as necessary, e.g. performance for lr-mupen64plus and default for lr-gambatte, or any other customisation.

What do you think @buzz? should be a fairly easy thing to code taking the videomode functionality as template.

[BuZz]

@hhromic The interface is busy enough as it is. I don't think this warrants that level of configuration. So no thanks.