Latest update and PS3 sixaxis controller
hostolis last edited by
@George-Spiggott same with Xbox one S wireless (Bluetooth) controller. I had to run the downgrade script for my controller to work again.
If you're having controller issues, please report the exact version of the firmware package you have installed (via terminal or SSH):
dpkg -l | grep raspberrypi-kernel
AssPunchMan last edited by
Hi! tested latest version 4.5 and downgrade NOT is required.
Not more vibration in controller. Pair -> get to configure input -> and now is paired y configured.
I'm not sure I understand. Where do I turn off vibration?
oleguer last edited by
Bug is now fixed??
@oleguer If you run an update of the OS and packages through the RetroPie-Setup script, it will install a correct Linux Kernel, which doesn't have the bug in this topic.
Use the update from RetroPie-Setup, it will fetch the latest version of the script and then choose yes when it asks if you want to update the "OS and packages".
I tried again after updating and it doesn't work. I may have made a schoolboy error though. When I first set up my Pi with my old image I modified a script to allow my then Xbox One pad to work. Does a PS3 pad also require this modification to the Bluetooth settings?
Efriim last edited by Efriim
The PS3 driver sort of does this on its own, and replaces the bluetooth stack with one that was written to work with PS3 controllers
The sixaxis helper driver doesn't need any additional script, and it doesn't replace the bluetooth stack so you can use it with other bluetooth devices sidebyside.
I don't know about the updates, I no longer have a pi to try them out.
sudo rpi-updatewill give you the absolute latest. And when I tried it, it seemed to work fine.
And then the RetroPie setup, is suggested as it now upgrades to a working kernel.
With xbox controllers, one of the drivers might be interrupting the other controllers(the xpad one I think that emulates a controller), could try disabling it and rebooting.
Maybe though a similar script that was written for the xboxpad could be written for the ps3 and then they would work sidebyside with the xpad driver.
@George-Spiggott Post the result of
dpkg -l | grep raspberrypi-kernel
sixaxishelper doesn't need any modifications to the Bluetooth settings, it uses the normal Bluetooth stack, unlike the
ps3controllerdriver which - as @Efriim said - replaced the Bluetooth stack with its own.
wmarcio last edited by
How i can unninstall this script, and make permanent changes to auto update options update all my setup?
I AM on a rpi 3 B+.
@wmarcio See the usage instructions at https://retropie.org.uk/forum/topic/22312/latest-update-and-ps3-sixaxis-controller/9?page=1
sudo ./downgrade_firmware.sh unblock
jbob last edited by
I can't seem to get my PS3 controllers paired with this new update. I recently bought a new 64gb Sandisk Extreme microSD card to use on my RPi3b+ just for RetroPie. I downloaded the most recent img file (4.5.1) from the download site. I have followed the directions found in the PS3 controller docs for setting up a PS3 controller. I have tried on a clean install after installing the sixaxis drivers, and have tried after following some of the suggestions found within this thread. The PS3 controllers don't seem to register on the bluetooth device list for some reason.
I have 4.4.14 running on a smaller sd card, so I know the controllers work. Just can't seem to get them to connect on the new update. Any suggestions?
George Spiggott last edited by George Spiggott
@mitu Sorry only just noticed this.
"@George-Spiggott Post the result of dpkg -l | grep raspberrypi-kernel"
I get this:
hi raspberrypi-kernel 1.20190401-1 armhf Raspberry Pi bootloader
hi raspberrypi-kernel-headers 1.20190401-1 armhf Header files for the Raspberry Pi Linux Kernel
pikey last edited by
I have the same issue as @jbob. I'm on 4.5.1 and have a Pi 3 B+ and I can't get the dualshock controllers to show on the bluetooth devices list.
ivooc last edited by
I don't know if it is related, but I'm using a DS4 and sometimes it doesn't show up on the bluetooth devices list when I'm trying to pair with it.
@ivooc It's not related, the DS4 uses BT exclusively and doesn't need the
I've tried the downgrader script and I still can't get the pad to show in the Bluetooth devices list.
As an experiment I tried swapping driver to PScontroller. The pad still doesn't show in the Bluetooth devices list but it does connect via Bluetooth. The buttons don't work properly (some do, some don't) so I can't remap the buttons within Retropie. However I may be able to remap them with a text editor.
I had another go this evening. I removed PScontroller and reinstalled Sixaxis. After a couple of attempts to reconnect it now works fine. No idea why Sixaxis wasn't working before when I reinstalled it but it works now.
Thanks for all your help.
notthesame last edited by
@George-Spiggott cool ill try when i get home my kids wanted to play avp and couldnt get to work only paired thank you.