Almost finished home RasPi 3B, Issue with Controllers, Need fresh minds

tjayhawk32

@mitu Starting now.

Also idk if this matters, but all of the controllers are active in the menu.

tjayhawk32

I can't get it to log anything, so hopefully this helps. There are a total of 8 ports being used on the hub for this, with a few of those having dual ports like N64, Genesis and DC.

Curious if the ones that showed up as 'not configured' were the reason those emulators stopped launching, I tried selecting the ones that did configure back on the RetroPie, and even unset, with the same crash result on Genesis.

BuZz

@tjayhawk32 Your email is bouncing due to a full email box. Please disable email notifications or fix this or I may have to remove your account.

tjayhawk32

@BuZz I fixed it on my end, but do you mean they're bouncing and you were getting them back?

BuZz

@tjayhawk32 yes. When your email box was full the emails bounced. If you have limited email space I would turn off category subscriptions and just check topic notifications on the forum.

tjayhawk32

Understood. Sorry about that.

tjayhawk32

@mitu I've done a fresh install. Im going to plug in and configure the controllers one at a time.

What scripts/tests should i run and document in between each to see when/if it starts messing up?
.

mitu

@tjayhawk32 There's no scripts to be run, just configure the controllers - one by one - and then start RetroArch, see if all of them are detected and if they work (at least the controllers that's slotted for Player1).
See if/when they stop working and try to unplug one and notice if the configuration is stable again. Start with only 1 powered hub (maybe you have a 7 port hub), so that's only 1 USB port on the Pi that's taken.

tjayhawk32

@mitu Got it.

Do you think it matters where the 2-port adapters go in the sequence? (like before or after one-port adapters for whatever reason)

mitu

@tjayhawk32 I don't think the order matters. The Pi has only 1 internal USB hub, any port would go over the same data path.