Forced to re-map EmulationStation controls every time on boot

mitu

@lghtanddrk said in Forced to re-map EmulationStation controls every time on boot:

And what is the path to get to the config file? I stumble on it by accident and don't recall where I saw it.

The file is in /home/pi/.emulationstation (if you're using WinSCP) or \\retropie\configs\all\emulationstation (if you're using file shares). You can check the permissions on the file via WinSCP - see https://www1.udel.edu/it/help/connecting-ud/filetransferWinSCP.html#permissions.

What does the file contains right now ? Post the contents in the forum, using ``` before and after to format the output. Like this


```
config file contents. 

```

lghtanddrk

@mitu I will try it as soon as I get home and report back. Really hope this is the answer. Thank you for your quick reply!

lghtanddrk

I finally got it working. The sticks are showing up as the same GUID as the PSX controller so as soon as I mapped one it overwrote the other. I have itworking now so the sticks map correctly and work in ES. The PSX is incorrect but works fine in the PSX emulator so I can live with it. 2 questions though. In the Retroach XMB I disabled bezels and it permanently saved when I saved the overrideit but if I enable the analog stick it doesn't save even though I am saving an override. Any idea why? And, the second question, is there a way to assign different GUIDs to devices so my sticks and the PSX controller are not on the same GUID?

mitu

@lghtanddrk said in Forced to re-map EmulationStation controls every time on boot:

And, the second question, is there a way to assign different GUIDs to devices so my sticks and the PSX controller are not on the same GUID?

I don't know how XMB works, but if you want to globally configure RetroArch, you should make all the configuration after starting RetroArch from the RetroPie menu, as opposed to starting it from a random game/rom.

For the GUIDs conflict, one solution would be to hide/mask the original controller using xboxdrv - https://retropie.org.uk/docs/Universal-Controller-Calibration-&-Mapping-Using-xboxdrv/.
Since your PS3 controller will always be P3, use it to mask the /dev/input/js2 input device. You'll have to re-configure it again in ES/RA, since it will appear as a different device.

lghtanddrk

I'll take a look at the RetroArch tool. Thanks. I read the instructions for masking the ID. Looks pretty complicated. Is there an easier method? Is it common that a completely different controller would share the same GUID? Is there another brand Playstation controller or similar controller that you can recommend that would just work automatically on a different ID? Would a PS4 controller plugged in via USB need a driver and would that operate off of a different ID?

mitu

@lghtanddrk said in Forced to re-map EmulationStation controls every time on boot:

Is it common that a completely different controller would share the same GUID?

It's not common - just lazy vendors that stuff the same controller chip in their controllers without bothering to add a separate name or VID/PID.

Is there another brand Playstation controller or similar controller that you can recommend that would just work automatically on a different ID? Would a PS4 controller plugged in via USB need a driver and would that operate off of a different ID?

The Sony PS3/PS4 controllers have their own driver and are well supported, if you have the option to use them - then do so.

lghtanddrk

So I wouldn't need to install any drivers for a PS3 controller? I can use a wireless one with a USB charging cable and just plug it in? Or do I need to find a wired PS3 controller? Should it be a Sony factory original in order to ensure the ID and driver works?

mitu

@lghtanddrk For the PS3, they can connect via Bluetooth, for which you need the sixaxis or the ps3controller driver - see https://retropie.org.uk/docs/PS3-Controller/.
It doesn't have to be a genuine PS3 controller, a lot of the clones work with the drivers.

lghtanddrk

@mitu If I just plug in PS3 or PS4 controller with a USB cable is it just plug and play? Or do I still need a driver?

lghtanddrk

I think I installed both drivers in case I ever wanted to use them. I am not going to use it wireless so should I uninstall both drivers? If I did ever want to use wireless which driver is better? These are also for PS3. What about PS4?

mitu

@lghtanddrk PS4 doesn't need any drivers - wireless or not. If you intend to use the PS3 style controllers wired only, I don't think you'll need any driver, so my advice would be to uninstall them.

lghtanddrk

Thanks

lghtanddrk

Hi, I am running into new issues now. I uninstalled the sixaxis and PS3 drivers and plugged a Ps4 controller in with a USB cable. It worked in EmulationStation but had no luck at all with the Retroarch GUI or in any emulators. So I decided to just keep using my PS1 wire controller. BUT, now after spending hours on this I can only get it working in the Retroarch menus and not in any games. I am only using it with PCSX and PCSX Rearmed. I deleted all the CFG files and made sure that the controller order for those emulators had the controller assigned to P1. Any ideas on how to get my Retroarch back in shape? I really don't want to wipe everything out on the SD card and start over. Thanks.

mitu

@lghtanddrk said in Forced to re-map EmulationStation controls every time on boot:

It worked in EmulationStation but had no luck at all with the Retroarch GUI or in any emulators.

Maybe because it's the 3rd controller and it's assigned to P3. Make sure you configure the controller in Emulationstation, then use the configuration editor and re-order the gamepads so that gamepad no. 3 is set as P1.

Clyde

@meleu's joystick-selection tool is another easy way to re-order the controllers.

lghtanddrk

I did use the joystick selection tool. When I am in the RGUI for the emulator it shows input for P1 as the correct controller. I even mapped all the controls. Like I said, the PSX controller will work in the RGUI after doing that but I just can't get it to work as P1 for either of the PSX emulators. I had it working briefly including the left analog stick working. Something got messed up when I tried to add the PS4 controller. I even went as far as deleting all the retroarch configs and the PSX emulator configs and then copying the files back from a different image where the controls are working. But that didn't work either.

mitu

@lghtanddrk Post a log file (/dev/shm/runcommand.log), taken after running the game. Make sure you enable verbose/debug logging with the Runcommand launch menu, then run the game, exit, take the log file and post it on pastebin.com.

lghtanddrk

@mitu I went to the link but I am not understanding how to enable verbose/debugging. Where do I go to enable it?

mitu

@lghtanddrk When you launch a ROM, you can press a button (usually A) to open the Runcommand menu. From there, if you're using a RetroArch based emulator core, you have the option to Launch with verbose logging.

lghtanddrk

Thanks. I will let you know as soon as I have it posted.