ScummVM Controlller Issues
-
@ExarKunIv said in ScummVM Controlller Issues:
evtest /dev/input/event[•]
evtest /dev/input/event2
Input driver version is 1.0.1
Input device ID: bus 0x5 vendor 0x57e product 0x2007 version 0x1
Input device name: "NES Controller (L)"
Supported events:
Event type 0 (EV_SYN)
Event type 1 (EV_KEY)
Event code 304 (BTN_SOUTH)
Event code 305 (BTN_EAST)
Event code 306 (BTN_C)
Event code 307 (BTN_NORTH)
Event code 308 (BTN_WEST)
Event code 309 (BTN_Z)
Event code 310 (BTN_TL)
Event code 311 (BTN_TR)
Event code 312 (BTN_TL2)
Event code 313 (BTN_TR2)
Event code 314 (BTN_SELECT)
Event code 315 (BTN_START)
Event code 316 (BTN_MODE)
Event code 317 (BTN_THUMBL)
Event code 318 (BTN_THUMBR)
Event code 319 (?)
Event type 3 (EV_ABS)
Event code 0 (ABS_X)
Value 32768
Min 0
Max 65535
Fuzz 255
Flat 4095
Event code 1 (ABS_Y)
Value 32768
Min 0
Max 65535
Fuzz 255
Flat 4095
Event code 3 (ABS_RX)
Value 32768
Min 0
Max 65535
Fuzz 255
Flat 4095
Event code 4 (ABS_RY)
Value 32768
Min 0
Max 65535
Fuzz 255
Flat 4095
Event code 16 (ABS_HAT0X)
Value 0
Min -1
Max 1
Event code 17 (ABS_HAT0Y)
Value 0
Min -1
Max 1
Event type 4 (EV_MSC)
Event code 4 (MSC_SCAN)
Key repeat handling:
Repeat type 20 (EV_REP)
Repeat code 0 (REP_DELAY)
Value 250
Repeat code 1 (REP_PERIOD)
Value 33
Properties:
Testing ... (interrupt to exit)
Event: time 1581384792.771063, type 3 (EV_ABS), code 17 (ABS_HAT0Y), value -1
Event: time 1581384792.771063, -------------- SYN_REPORT ------------
Event: time 1581384792.921040, type 3 (EV_ABS), code 17 (ABS_HAT0Y), value 0
Event: time 1581384792.921040, -------------- SYN_REPORT ------------
Event: time 1581384793.656070, type 3 (EV_ABS), code 17 (ABS_HAT0Y), value 1
Event: time 1581384793.656070, -------------- SYN_REPORT ------------
Event: time 1581384793.806042, type 3 (EV_ABS), code 17 (ABS_HAT0Y), value 0
Event: time 1581384793.806042, -------------- SYN_REPORT ------------
Event: time 1581384794.376036, type 3 (EV_ABS), code 16 (ABS_HAT0X), value -1
Event: time 1581384794.376036, -------------- SYN_REPORT ------------
Event: time 1581384794.541031, type 3 (EV_ABS), code 16 (ABS_HAT0X), value 0
Event: time 1581384794.541031, -------------- SYN_REPORT ------------
Event: time 1581384795.036039, type 3 (EV_ABS), code 16 (ABS_HAT0X), value 1
Event: time 1581384795.036039, -------------- SYN_REPORT ------------
Event: time 1581384795.216068, type 3 (EV_ABS), code 16 (ABS_HAT0X), value 0
Event: time 1581384795.216068, -------------- SYN_REPORT ------------
Event: time 1581384795.696032, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90009
Event: time 1581384795.696032, type 1 (EV_KEY), code 312 (BTN_TL2), value 1
Event: time 1581384795.696032, -------------- SYN_REPORT ------------
Event: time 1581384795.950511, type 1 (EV_KEY), code 312 (BTN_TL2), value 2
Event: time 1581384795.950511, -------------- SYN_REPORT ------------
Event: time 1581384795.951042, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90009
Event: time 1581384795.951042, type 1 (EV_KEY), code 312 (BTN_TL2), value 0
Event: time 1581384795.951042, -------------- SYN_REPORT ------------
Event: time 1581384796.431037, type 4 (EV_MSC), code 4 (MSC_SCAN), value 9000a
Event: time 1581384796.431037, type 1 (EV_KEY), code 313 (BTN_TR2), value 1
Event: time 1581384796.431037, -------------- SYN_REPORT ------------
Event: time 1581384796.690515, type 1 (EV_KEY), code 313 (BTN_TR2), value 2
Event: time 1581384796.690515, -------------- SYN_REPORT ------------
Event: time 1581384796.701046, type 4 (EV_MSC), code 4 (MSC_SCAN), value 9000a
Event: time 1581384796.701046, type 1 (EV_KEY), code 313 (BTN_TR2), value 0
Event: time 1581384796.701046, -------------- SYN_REPORT ------------
Event: time 1581384797.196037, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001
Event: time 1581384797.196037, type 1 (EV_KEY), code 304 (BTN_SOUTH), value 1
Event: time 1581384797.196037, -------------- SYN_REPORT ------------
Event: time 1581384797.450510, type 1 (EV_KEY), code 304 (BTN_SOUTH), value 2
Event: time 1581384797.450510, -------------- SYN_REPORT ------------
Event: time 1581384797.451027, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001
Event: time 1581384797.451027, type 1 (EV_KEY), code 304 (BTN_SOUTH), value 0
Event: time 1581384797.451027, -------------- SYN_REPORT ------------
Event: time 1581384797.946042, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90002
Event: time 1581384797.946042, type 1 (EV_KEY), code 305 (BTN_EAST), value 1
Event: time 1581384797.946042, -------------- SYN_REPORT ------------
Event: time 1581384798.186045, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90002
Event: time 1581384798.186045, type 1 (EV_KEY), code 305 (BTN_EAST), value 0
Event: time 1581384798.186045, -------------- SYN_REPORT ------------ -
no problem if your on your phone ... im sorry for bothring ..
im sorry if this is all confusing for me
i swear i followed all the steps 3 times and nothing seems to work for me .... i dont know what im doing wrong
-
here are a few steps i have followed results ... its mainly just info .. if you could help me compile them correctly ?
-
Here is a Txt Documents of alll the steps i Tested With no success
if you could review it a maby make a an easy guide for me .. or if you need more info , then please inform me and i will follow your instructions and provide you info ...
thank you
-
@escc1986 ok im taking a look at everything that you gave me. it does seems like you have all the info for us to get this up and going. i just need a bit to remember how to go about it this way.
i go about using xdrv a different way now, but we will get you up and going.
-
Thanks for taking a look , take your time , as i know i provided alot , just hope we can get this controller working :)
-
@escc1986 step 1
remove this from rc.local
sudo nano /etc/rc.local sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \ --evdev /dev/input/event2 \ --silent \ --detach-kernel-driver \ --force-feedback \ --deadzone-trigger 15% \ --deadzone 4000 \ --mimic-xpad \ --evdev-absmap ABS_HAT0X=dpad_x,ABS_HAY0Y=dpad_y \ --evdev-keymap BTN_SOUTH=a,BTN_EAST=b,BTN_[•]=x,BTN_[•]=y,BTN_[•]=lb,BTN_[•]=rb,BTN_TL2=back,BTN_TR2=start \ --dpad-only \ --ui-axismap lt=void,rt=void \ --ui-buttonmap tl=void,tr=void,guide=void \ &still working on the rest
RPi3B+ / 200GB/ RetroPie v4.5.14, RPi4 Model B 4gb / 256gb / RetroPie 4.8.2
Maintainer of RetroPie-Extra .
Here is a discussion Pi5 testing page -
@ExarKunIv also what difference did you see with the scummvm and the scummvm-sdl.
i had both on mine and i did not see anything different -
Sorry if this is a Noob Question
To delete that file
I go to directory
/opt/retropie/supplementary/xboxdrv/bin/xboxdrv
Sudo rm xboxdrv
Is that correct ?
About the other Scumm I did experience freeze ups and I'm not sure why , but in the end I guess I just want to learn how to configure xboxdrv as a mouse ... it's about learning then having fun by playing after I appreciate the help and learn and then play the game
-
@escc1986 no dont do that
RPi3B+ / 200GB/ RetroPie v4.5.14, RPi4 Model B 4gb / 256gb / RetroPie 4.8.2
Maintainer of RetroPie-Extra .
Here is a discussion Pi5 testing page -
just use
sudo nano /etc/rc.localand removesudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \ --evdev /dev/input/event2 \ --silent \ --detach-kernel-driver \ --force-feedback \ --deadzone-trigger 15% \ --deadzone 4000 \ --mimic-xpad \ --evdev-absmap ABS_HAT0X=dpad_x,ABS_HAY0Y=dpad_y \ --evdev-keymap BTN_SOUTH=a,BTN_EAST=b,BTN_[•]=x,BTN_[•]=y,BTN_[•]=lb,BTN_[•]=rb,BTN_TL2=back,BTN_TR2=start \ --dpad-only \ --ui-axismap lt=void,rt=void \ --ui-buttonmap tl=void,tr=void,guide=void \ &this is what you have in your txt of what you did.
as for me i have not played much with either. but im finding that with my 8bitdo pro 2 the scummvm already has my analog stick mapped as a mouse. not sure how.i think cuz it now supports it as a mouse from defult now that im looking into it
-
Thanks for that , i almost made a big mistake .. thanks for saving me ...
ok i just removed the text
-
@escc1986 ok now that is gone. we can start
with that in there is would override everything setting that the pie uses.we want it for a certain game.
-
thats interesting that yours is already mappped , nice to know for you
i dont know , i just want to get a kick out of myself and my son playing scumm vm with an nes controller something seems cool about it for me
-
@escc1986 its all good.
with xdrive everything can be made to work
here is MY old mapping i used to need to use
#!/bin/sh if [ "$1" = "scummvm" ] then sudo killall > /dev/null 2>&1 xboxdrv sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv > /dev/null 2>&1 \ --evdev /dev/input/event2 \ --silent \ --detach-kernel-driver \ --force-feedback \ --mimic-xpad \ --dpad-as-button \ --trigger-as-button \ --evdev-absmap ABS_X=x1,ABS_Y=y1,ABS_Z=x2,ABS_RZ=y2,ABS_HAT0X=dpad_x,ABS_HAT0Y=dpad_y \ --evdev-keymap KEY_#304=a,KEY_#305=b,KEY_#307=x,KEY_#308=y,KEY_#312=lt,KEY_#313=rt,KEY_#310=lb,KEY_#311=rb,KEY_#317=tl,KEY_#318=tr,KEY_#314=back,KEY_#315=start \ --calibration x1=-32767:0:32767,y1=-32767:0:32767,x2=-32767:0:32767,y2=-32767:0:32767 \ --axismap -Y1=Y1,-Y2=Y2 \ --ui-axismap x1=REL_X:10,y1=REL_Y:10 \ --ui-buttonmap a=BTN_LEFT,b=BTN_RIGHT,start=KEY_F5,back=KEY_ESC \ --ui-buttonmap guide=void,x=void,y=void,lb=void,rb=void,tl=void,tr=void,lt=void,rt=void,back=void \ --ui-axismap x2=void \ & fiyours was getting there but its missing a bit for it all work.
YOURS
#!/bin/sh if [ "$1" = "/opt/retropie/emulators/scummvm" ] then sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \ --evdev /dev/input/event2 \ --silent \ --detach-kernel-driver \ --force-feedback \ --deadzone-trigger 15% \ --deadzone 4000 \ --mimic-xpad \ --evdev-absmap ABS_HAT0X=dpad_x,ABS_HAY0Y=dpad_y \ --evdev-keymap BTN_SOUTH=a,BTN_EAST=b,BTN_[•]=x,BTN_[•]=y,BTN_[•]=lb,BTN_[•$ --dpad-only \ --ui-axismap lt=void,rt=void \ --ui-buttonmap tl=void,tr=void,guide=void \ & fi -
good that we got rid of it now .... we shall start fresh and clean
(i think i meddled with this xboxdrv months ago ... how would i know or delete any controllers from the past )
-
thanks for pointing your's out and then mine
i know i may have a more simple controls ... but i still dont really understand & confused what im missing ... but hope you can clear that up
-
--evdevis the code the controller sends out
--uiis what we want the controller to do.so exampler from mine
i had the a key mapped as the left mouse button--evdev-keymap KEY_#304=a --ui-buttonmap a=BTN_LEFT -
@escc1986 said in ScummVM Controlller Issues:
thanks for pointing your's out and then mine
i know i may have a more simple controls ... but i still dont really understand & confused what im missing ... but hope you can clear that up
im going to do my best
-
that makes sense to me , thank you
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.